OMFG! yes! I have this fucking awful mini atx small dick ass fuck fart MOBO? Heart attacks I have had so far: removing ram, install more ram, getting to the ram clips. Last time I upgrade ram was years ago when ramslots were far enough appart(?) and both ends opened, intalling another connector for more hd space, every video from tech tubers is all like: wave my hands and its that easy! uh mmm say that with a mobo and tower that incredibly cramped!
@@kutlermclean should still work (as long as the slot itself isn't damaged) but make sure it is screwed in tight at the bracket side. maybe double check that everything is still snug if you ever pick up and move the whole pc
Trying to remove my GPU right now. I just cant get it out. What is this idiotic mechanism?? I have tried pushing the clip very hard with different tools, but it just wont move. Now my GPU is half out and half in. (Stuck from the rear at the clip)... and I need it out right now!
YES! THANK YOU! Watched 5 other videos before this one that just magically hand-wave this away as "and then you'll press the clip" without showing how or what the proper tool is! Much appreciated!
Excellent advice! This was making me nuts, as I couldn't figure out even where the clip was or which direction it was supposed to go. Ended up trying a plastic pen, which worked fine. Thanks so much!
Used the screwdriver method for a long time with no issues... until there were issues. Screwdriver slid out of the slot taking a surface mount component with it on my $300 motherboard. Nice. Larger issue in my case wasn't necessarily the material as I'm sure even plastic would've ripped something off but force. When you're applying a downward force like that you're relying on your reaction time to know when to stop so if the clip is particularly stiff as it was in my case it can still cause problems. It night be wiser to strike the back of the implement with the handle of a screwdriver or small mallet. That way the force is only being applied to the clip and if it deflects it wont have any force chasing it just the inertia of the plastic itself. Not a mistake I plan on making again.
Most underrated video for PC upgrades. I was thinking about using my interior trim tools or a plastic tyre lever for my mountain bikes to do the same thing. Luckily your video positively confirmed what I had in mind! Top notch geezer!
Thank God I looked this up, almost spiraled into a pit of rage after starting to bend the clip by using the butt end of a screen driver. Grabbed my wedge tool and popped it right out. Thank you sir for your voice of reason
Sir, i just wanted to say thank you for being a calm voice of reason and touching on a subject that literally isnt spoken about at all but is a HUGE issue! ive had all kinds of ridiculous issues with my first build, and when i was putting in my first ever gpu, super broke from buying the parts i ended up having to watch your video because the gpu clicked in but CLEARLY wasn't seated properly because i could still see the pins but it wouldnt go foward and it would NOT pull out either took me HOURS to get it to come out and oh man i was stressing and sweating but all worked out in the end! 🖤
Ive never broken a pcie slot (hands work fine lol, done it for years) but for people who are not as knowledgeable this is a great solution since Ive talked to people in the past that have easily destroyed their motherboard like you said in the beginning with a screwdriver
I hadn't either, until it happened. Broke off with my finger, so I'm going to go ahead and call it a manufacturing issue. First time that's ever happened to me, and the thing is it's an Asus TUF Gaming board, and those wings look thicker than average.
Unfortunately only in newer high end motherboards there's a button that disengages the lock on the pcie 16x slot. I wish every motherboard had that as standard.
Good tip though less people will run into this problem with latest motherboard manufacturers adding a quick release button, a much needed quality of life change. In the past I would use the eraser end of a pencil when that situation presented itself (never had issues).
For any Asian household; a simple wooden chopstick will suffice. I really want the new motherboard button to relase the gpu but maybe in 4-5 years time once i completely upgrade my pc.
Thank you so much for this video! Have worked with computers for decades, but the gigantic graphics cards a pain to work around. Found the “Q-Release” button on my AMD Asus board and the card popped right out.
I was very exited about my new card couple years ago and actually forgot about the lock while removing the old card. The whole slot came so quick and smooth of the board, it was ridiculous. Zero force needed. Horrible experience.
I broke my retention clip last week taking out my RX 6600. The mistake I made was unscrewing the i/o and lifting my card first before pushing on the retention clip, thus forcing my card out and the clip came with it. Luckily, I repaired the clip and slotted it back in. Thanks for the tip!
I found a reddit thread that suggested a wooden chopstick, and I managed to make that work perfectly (never slipped either, which was a relief) I found it a lot easier to push almost entirely from the side (like the back of the pc case, rather than straight down), thinking of it as pushing the clip 'back' rather than 'down' (or I guess forwards, since that's towards the front of the case?) The chopstick was super useful because of how long it was though, I have one of those fat new-gen cards and a giant cpu dual-tower cooler leaving me less than an inch of space to work with over the GPU. Anyway, thank you for the video, it was helpful, and I'm glad I didn't use a screwdriver for it.
I litterally have 2 screws that i can slide my facia tool down and leave it permanantly in my PC case. Been using those for years to remove the "Large" GPUs. Nice to see someone as clever as me lol 🤣🤣🤣🤣
I use the eraser on a pencil to have the same effect without having to buy another thing to use once in a blue moon. If its a really tight space, those wedge eraser pencil ends work fine for this most of the time.
I had to use the screwdriver for mine to push down the thing and it was so difficult with my bare hands. I hope I didn’t ruin anything on my motherboard as I’m writing this. I’ll update later. Update: everything went well lol, I had to update some parts and luckily nothing was damaged. :)
@@DLMtechgarage I put the thing in but never even thought about that clip until watching your video! Really appreciate even some of the simplest videos which could escape anyones mind!
If a wooden pick like yours is unavailable, a wooden spatula meant for cooking works too. I had to use that to release the GPU from my MSI B550 Tomahawk.
Thx. I couldn't remove mine and Before I pull too hard and broke something I decided to check youtube. Of course there's some sort of tab at the end of the car that you have to push so thanks for this video. I got my card out without damaging anything.
I'm so lucky that I bought a cheap auto trim removal set about two years ago (that I ended up not needing and didn't return, so it was in my garage today and I could work on my own computer. This video was great advice - wish I had seen it before I worked on my spouse's computer a year ago though! Thanks.
I usually use a screwdriver flathead and put tape on it to avoid damaging anything but this is a nice tip. You could probably also use a tire changing tool for bicycles since it has the same wedge form in one end.
TIP: I haven‘t been able to unclip the slot with a screwdriver. But I managed to do it by removing the CPU Cooler and then unclipping the Slot by Hand. It helps a lot!
Great tip, I did not know how to remove it, I use my hands force and remove the pci express clip (not gpu socket) and I solved the problem, without this plastic you do not need this tool hahaha but my solve was a lucky and not professional solution, thanks for sharing 🎉🎉
Thanks for the vid. I built my first pc. It went well other than my PCIe Retention Clip got well and truly stuck when I put the GPU inside. The pc rapier shop told me to just force out my GPU. I'm glad I didn't listen, and watched this. It took many hours of frustration to finally get it to click!! If there is anyone else with a stuck PCIe Retention Clip. Push the clip at around a 45 degree angle, and not at a 90 degrees like on this video.
Thank you! I’m swapping my graphics card for the first time today and I’m nervous. This just relaxed my nerves a ton! I have a bunch of similar soft plastic tools i use for crafting stuff for my dnd table that’ll work perfectly.
there is one more easier way, u just need a ruler. while the whole pc is upright, unscrew the graphic card (keep holding the card). while holding the graphic card (level it), wiggle abit, u will see the latch move, thats when u use the ruler and push the latch (not too much force), wiggle graphic card and push the latch, u will see the latch move little by little until it unlatched. not much force needed
I freaking hate how hard it is to push those things down. I just ruined my 3070ti the other day by being impatient and trying to get the card out. Oh well, buying a new PC anyway.
OMG Thank you so much for this! Had to walk away from my computer when I managed to get my RX 6800 XT stuck partway in its vertical rider slot. Fingers weren't doing it, but a spudger worked perfectly! Wws worried i broke it but all good
Sadly came across this video after I used a screwdriver to completely snap off the clip on day one of a brand new board! The only good news is that everything still works but lesson certainly learnt.
same here, broke the latch, nothing else was damaged.. contemplating buying a new motherboard but now it's that, pay someone to rebuild it bc i am noooot rebuilding a pc and now it's a 500 dollar lesson
Thank you. Great video.. nobody seems to talk about this topic.. the thing is, my gpu clip *requires* to put alot of force on it to unlatch... (b550-f, its even supported by metal, the slot and the clip) My clip is now broken and the metal is bent..🤬
Truly a disgrace that we even have to deal with this pathetic shit. This is like 2004 parts on our new motherboards. The new updates with quick release are SO overdue
@@shecravesit7072I just battled 30 minute to pull out my radeon he 4790 lol( it was stuck on the back panel of the pc,with the metal kinda ) so kinda correct with this 2004 métaphore... it was hard back then, and I guess it’s still the same today
I use a wooden chopstick if I have to take my gpu out. It has long reach and very easy not to break anything. Plus I get tons of them every time I order Chinese food
Thanks for this tip, I aught to give it a try next time. I have a 6900 XT Devil big boi and it took me forever last time to remove it, but now I'll try your method.
STRIX motherboards are known to be faulty. i slotted in a 6800xt and now i want to clean it but the clip is practically wedged into the gpu, i had to use a hammer and a trim tool to tap the thing loose.
Well hey glad to hear I'm not the only one having this issue, just broke the clip INSTALLING my 4090, such a shame. I like hearing and getting the comfort that you don't *need* it especially because I'm getting an anti sag mount but still. It sucks. Idek how to get it out now... my first top of the line GPU and I go and mess it up lol
@@DLMtechgarage Yeah, hope it doesn't impact performance in any way! But yeah I bet it's fine, and when I get it out when I get my ssd I'll be real real careful with the screwdriver! I don't have one of these tools but man do I not want to break my 4090.
ive just recently pulled out my GPU (the proper way of course not just yanking it out lol) because some dust kind of accumulated in the PCIe slot causing my GPU to have a poor connection. since I booted it up and it was showing no display on the monitor but it boots up fine (was able to confirm this because the windows startup sound would play through my speakers) used a canned air duster to spray the PCIe slot, dusted the pins on the GPU itself aswell and plopped it back it, everything was back to normal
There is no reason for these tabs to be there, i hated them from day one, with all of my builds the first thing i would do is take the cutters and remove it, card is tightly secured to the case, using any kind of latching mechanism to the PCIE socket is a terrible idea, this is frankly a feature i want the manufacturers to simply stop using, it's shit.
Any tips on removing the clip altogether before installing anything on the slot? I think the clip should not exist at all; as long as you screw in the card tight enough, the clip will not be of benefit. This design was okay when graphics cards were small, so the clip was easily visible and reachable, but this was a long time ago. Today, on top of the sheer size of the card, a thick backplate may make pushing the clip with a finger very hard even with good clearance, since it may partially cover it. This design should not be utilized any further is my opinion, all new mobos should come with something easier/more advanced, and most importantly safe for the other parts to operate with.
This was an absolutely brilliant "how to." And I've watched a ton in the recent build, this was one of the most succinct. Kudos.🥇 Just about to order a trim tool set. (Which I never heard of before this vid) also liked, and subbed, you deserve it Thank you. 👍🏻
There's a special place in hell for whoever decides that clip is a good idea. I've damaged a Lenovo motherboard from trying to fight that demon of a clip.
I recently had this issue a few days ago where my monitor isn't displaying anything when everything is connected & the light on the motherboard stays white the whole time
I got really lucky that one of my cats toys was a plastic stick with a rubber end....have a noctua air cooler and you'll never get in there without a tool or removing the cooler as a whole
my PCIE clip broke off when i was just using my finger, not even sure how since i wasnt putting that much pressure on it. no other damage apart from that broken piece, everything still works fine. Had to take out my GPU to reach the smaller PCIE slot for a wifi card
man this would’ve been useful back in March when I got a 3050 (returned it because it was a downgrade + never got it in the pc) This info will be useful when I buy another graphics card which will hopefully be soon
I removed the broken clip, took out another clip from an old motherboard, shoved that one in and I'm back on, the motherboard was scratched too but seems like msi did a good job with their x570 tomahawk, we'll update if anything comes up
Sadly I already have a broken clip so I have to find a way to remove the GPU. Its only the part of the clip that you use that is broken so there still is clip there only where its hard to reach (behind the GPU)
My issue is that I have more stuff mounted to it than the clip. It has like this metal wedge that holds the graphics card to the motherboard. I have a Msi 3060ti
The clip on my Aus x570 is horrible it’s somewhat mangled like it was chewed on by a cat or dog.I don’t know how it could have happened but yeah hard to remove my gpu every damn time I struggle. I wish these companies would design components with users in mind because whoever made this clip deserves to be fired it’s so soft and bendable plastic not normal at all.
my motherboard has the q-release for the top pcie 5.0 slot. it makes my life easier but i had to use both of my sore hands to wiggle out my Tuf card out of the slot causing a chaos :,)
I removed one of the fans on the cooler to get to the pin and i cant press it down. I have removed the gpu in the past and i remember it being difficult but i dont remember it being this difficult.. Good thing the gpu has a backplate and theres some metal thing right next to the pin just like yours, so i wont damage the motherboard.. From experience i think these pins start to become more loose over time if you tend to remove the gpu often, if not then theyre very difficult to deal with.
doesnt work for me. the 2nd pci slot for the GPU is destroyed because of this crap system, now my motherboard is still functionin though I lost audio. My main gpu slot is now in danger cause the GPU will not release
Yep that pcie clip is truly a horrible mechanism. It's like computers are designed let ppl learn the hard way lol
I know right!!
OMFG! yes! I have this fucking awful mini atx small dick ass fuck fart MOBO? Heart attacks I have had so far: removing ram, install more ram, getting to the ram clips. Last time I upgrade ram was years ago when ramslots were far enough appart(?) and both ends opened, intalling another connector for more hd space, every video from tech tubers is all like: wave my hands and its that easy! uh mmm say that with a mobo and tower that incredibly cramped!
it’s just a clip tho right? i broke it and idk if i broke the whole thing
@@kutlermclean should still work (as long as the slot itself isn't damaged) but make sure it is screwed in tight at the bracket side. maybe double check that everything is still snug if you ever pick up and move the whole pc
Trying to remove my GPU right now. I just cant get it out. What is this idiotic mechanism?? I have tried pushing the clip very hard with different tools, but it just wont move. Now my GPU is half out and half in. (Stuck from the rear at the clip)... and I need it out right now!
YES! THANK YOU! Watched 5 other videos before this one that just magically hand-wave this away as "and then you'll press the clip" without showing how or what the proper tool is! Much appreciated!
Glad it helped!
Excellent advice! This was making me nuts, as I couldn't figure out even where the clip was or which direction it was supposed to go. Ended up trying a plastic pen, which worked fine. Thanks so much!
Used the screwdriver method for a long time with no issues... until there were issues. Screwdriver slid out of the slot taking a surface mount component with it on my $300 motherboard. Nice. Larger issue in my case wasn't necessarily the material as I'm sure even plastic would've ripped something off but force. When you're applying a downward force like that you're relying on your reaction time to know when to stop so if the clip is particularly stiff as it was in my case it can still cause problems. It night be wiser to strike the back of the implement with the handle of a screwdriver or small mallet. That way the force is only being applied to the clip and if it deflects it wont have any force chasing it just the inertia of the plastic itself. Not a mistake I plan on making again.
I’m glad I read this so late
it has happen also to me... this clips suks! i never broken any clips in 12 years old motherboards... this new generations SUKS!
If you have a big air cooler it's virtually impossible to get your graphics card out with your bare hands. A babies hand might fit but nothing bigger.
it's crazy how mobo manufactures missed the mark on that!!
I'm regretting buying the Be Quiet! Dark Rock Pro air cooler for this exact reason.
@@Erkm4n been down that road!!
Used a long hex tool to push the lock down lol
I have the biggest Noctua air cooler. He fills every single space. It's impossible.
Thanks man, adding this to my PC toolkit. It worked perfectly, I couldn't believe how smooth it was.
Glad it helped!
Most underrated video for PC upgrades. I was thinking about using my interior trim tools or a plastic tyre lever for my mountain bikes to do the same thing. Luckily your video positively confirmed what I had in mind! Top notch geezer!
Thank God I looked this up, almost spiraled into a pit of rage after starting to bend the clip by using the butt end of a screen driver. Grabbed my wedge tool and popped it right out. Thank you sir for your voice of reason
glad it helped!!
Sir, i just wanted to say thank you for being a calm voice of reason and touching on a subject that literally isnt spoken about at all but is a HUGE issue! ive had all kinds of ridiculous issues with my first build, and when i was putting in my first ever gpu, super broke from buying the parts i ended up having to watch your video because the gpu clicked in but CLEARLY wasn't seated properly because i could still see the pins but it wouldnt go foward and it would NOT pull out either took me HOURS to get it to come out and oh man i was stressing and sweating but all worked out in the end! 🖤
Ive never broken a pcie slot (hands work fine lol, done it for years) but for people who are not as knowledgeable this is a great solution since Ive talked to people in the past that have easily destroyed their motherboard like you said in the beginning with a screwdriver
i spend my down time hunting, look for newer post and offer cash quick... plus my area has lots of people letting go of stuff cheap
What u mean not knowledgeable,you seem so stupid or your body is immature as your pencil hands match sticks hands reach down there to pull GPU.
I hadn't either, until it happened. Broke off with my finger, so I'm going to go ahead and call it a manufacturing issue. First time that's ever happened to me, and the thing is it's an Asus TUF Gaming board, and those wings look thicker than average.
Well there is no space for fingers between Double tower air cooler and 7900xtx..
Hadnt for 20 years of pc building. But these graphic cards are so big now sometimes, that it covers the whole pin.
Unfortunately only in newer high end motherboards there's a button that disengages the lock on the pcie 16x slot. I wish every motherboard had that as standard.
Good tip though less people will run into this problem with latest motherboard manufacturers adding a quick release button, a much needed quality of life change. In the past I would use the eraser end of a pencil when that situation presented itself (never had issues).
For any Asian household; a simple wooden chopstick will suffice. I really want the new motherboard button to relase the gpu but maybe in 4-5 years time once i completely upgrade my pc.
I just ran into this problem. Broke the release latch and the card is still stuck in the slot. Dammit!
Thank you so much for this video! Have worked with computers for decades, but the gigantic graphics cards a pain to work around. Found the “Q-Release” button on my AMD Asus board and the card popped right out.
Dude thanks a lot. Something so simple. I used a Lego remover tool. It’s orange, plastic and has a smooth flat end on it. Worked great!
I was very exited about my new card couple years ago and actually forgot about the lock while removing the old card. The whole slot came so quick and smooth of the board, it was ridiculous.
Zero force needed. Horrible experience.
I broke my retention clip last week taking out my RX 6600. The mistake I made was unscrewing the i/o and lifting my card first before pushing on the retention clip, thus forcing my card out and the clip came with it. Luckily, I repaired the clip and slotted it back in. Thanks for the tip!
I found a reddit thread that suggested a wooden chopstick, and I managed to make that work perfectly (never slipped either, which was a relief)
I found it a lot easier to push almost entirely from the side (like the back of the pc case, rather than straight down), thinking of it as pushing the clip 'back' rather than 'down' (or I guess forwards, since that's towards the front of the case?)
The chopstick was super useful because of how long it was though, I have one of those fat new-gen cards and a giant cpu dual-tower cooler leaving me less than an inch of space to work with over the GPU.
Anyway, thank you for the video, it was helpful, and I'm glad I didn't use a screwdriver for it.
I litterally have 2 screws that i can slide my facia tool down and leave it permanantly in my PC case. Been using those for years to remove the "Large" GPUs. Nice to see someone as clever as me lol 🤣🤣🤣🤣
I use back of a plastic tooth brush. It is blunt with no sharp edges and works fantastic
Good idea with the trim tool. With my 4090 in I can't see the retaining clip at all maybe a very trim tool. Thank you for the idea.
Man, had one of those in my toolbox and it worked like a champ in an otherwise impossible to get to space. Thank you.
I use the eraser on a pencil to have the same effect without having to buy another thing to use once in a blue moon. If its a really tight space, those wedge eraser pencil ends work fine for this most of the time.
Just broke the motherboards latch lmao, thankfully everything is working fine
I had to use the screwdriver for mine to push down the thing and it was so difficult with my bare hands. I hope I didn’t ruin anything on my motherboard as I’m writing this. I’ll update later.
Update: everything went well lol, I had to update some parts and luckily nothing was damaged. :)
Whew? Thank-you, exactly what I needed to hear. Cheers!
I am so glad I found this video!! I wondered why my graphics card wouldn't come out and I had to look before just pulling and breaking. Thank god! ❤
Glad I could help!
@@DLMtechgarage I put the thing in but never even thought about that clip until watching your video! Really appreciate even some of the simplest videos which could escape anyones mind!
If a wooden pick like yours is unavailable, a wooden spatula meant for cooking works too. I had to use that to release the GPU from my MSI B550 Tomahawk.
Saved me from damaging my GPU and/or motherboard. Thank you!
Thx. I couldn't remove mine and Before I pull too hard and broke something I decided to check youtube. Of course there's some sort of tab at the end of the car that you have to push so thanks for this video. I got my card out without damaging anything.
I'm so lucky that I bought a cheap auto trim removal set about two years ago (that I ended up not needing and didn't return, so it was in my garage today and I could work on my own computer. This video was great advice - wish I had seen it before I worked on my spouse's computer a year ago though! Thanks.
I usually use a screwdriver flathead and put tape on it to avoid damaging anything but this is a nice tip. You could probably also use a tire changing tool for bicycles since it has the same wedge form in one end.
Thank you. Mine is black and without a flashlight I didn’t even know where to look.
Got the job done with a Lego brick separator, thanks!
TIP: I haven‘t been able to unclip the slot with a screwdriver. But I managed to do it by removing the CPU Cooler and then unclipping the Slot by Hand. It helps a lot!
I take those little clips off before i build. Screws hold the card in just fine, and i never move my pc’s.
Something every builder should watch before they upgrade their PC! Nice video!
Great tip, I did not know how to remove it, I use my hands force and remove the pci express clip (not gpu socket) and I solved the problem, without this plastic you do not need this tool hahaha but my solve was a lucky and not professional solution, thanks for sharing 🎉🎉
Thanks for the vid. I built my first pc. It went well other than my PCIe Retention Clip got well and truly stuck when I put the GPU inside. The pc rapier shop told me to just force out my GPU. I'm glad I didn't listen, and watched this.
It took many hours of frustration to finally get it to click!! If there is anyone else with a stuck PCIe Retention Clip. Push the clip at around a 45 degree angle, and not at a 90 degrees like on this video.
I Also recommend A MRE spoon works wonders for that clip
Excellent tip because i had to clean my pc and was unable to remove my gpu... Thanks a lot really usefull
Thank you! I’m swapping my graphics card for the first time today and I’m nervous. This just relaxed my nerves a ton! I have a bunch of similar soft plastic tools i use for crafting stuff for my dnd table that’ll work perfectly.
Use a popsicle stick or tongue depressor . its light wood , soft and dry . Perfect tool for this .
I didn't have a similar tool as you show so I end up using a kitchen wooden spatula and it worked great.
SMART
there is one more easier way, u just need a ruler. while the whole pc is upright, unscrew the graphic card (keep holding the card). while holding the graphic card (level it), wiggle abit, u will see the latch move, thats when u use the ruler and push the latch (not too much force), wiggle graphic card and push the latch, u will see the latch move little by little until it unlatched. not much force needed
Thanks. This video saved me from mistakes, I get bit nervous when removing pc parts lol
A plastic butter knife works pretty good for my stuff and just don't push hard.
I have big hands and this is a nightmare
Just used a credit card flawlessly & easily, thanks👍
I've used a screwdriver SO MANY times it's a miracle I haven't ruined anything..I will sumthing softer to use😌🙏
I freaking hate how hard it is to push those things down. I just ruined my 3070ti the other day by being impatient and trying to get the card out.
Oh well, buying a new PC anyway.
great description of what to do, was able to remove the gpu without any damage
Great to hear!
Thanks! You kept be from ruining a very expensive video card xD lol.
Always worth a little search before you yank something out of your motherboard.
OMG Thank you so much for this! Had to walk away from my computer when I managed to get my RX 6800 XT stuck partway in its vertical rider slot.
Fingers weren't doing it, but a spudger worked perfectly! Wws worried i broke it but all good
Glad I could help!
Sadly came across this video after I used a screwdriver to completely snap off the clip on day one of a brand new board! The only good news is that everything still works but lesson certainly learnt.
same here, broke the latch, nothing else was damaged.. contemplating buying a new motherboard but now it's that, pay someone to rebuild it bc i am noooot rebuilding a pc and now it's a 500 dollar lesson
Thank you. Great video.. nobody seems to talk about this topic.. the thing is, my gpu clip *requires* to put alot of force on it to unlatch... (b550-f, its even supported by metal, the slot and the clip)
My clip is now broken and the metal is bent..🤬
dang!
Truly a disgrace that we even have to deal with this pathetic shit. This is like 2004 parts on our new motherboards. The new updates with quick release are SO overdue
@@shecravesit7072I just battled 30 minute to pull out my radeon he 4790 lol( it was stuck on the back panel of the pc,with the metal kinda ) so kinda correct with this 2004 métaphore... it was hard back then, and I guess it’s still the same today
@@ocerco93 I was extremely mad when I typed that comment lol
I recommend a wooden or plastic ruler, worked great
I use a wooden chopstick if I have to take my gpu out. It has long reach and very easy not to break anything. Plus I get tons of them every time I order Chinese food
🤣🤣
Thanks for this tip, I aught to give it a try next time. I have a 6900 XT Devil big boi and it took me forever last time to remove it, but now I'll try your method.
i once ripped out my whole pcie lane and when I saw this vid in my recommended I re-remembered my trauma
This was a lifesaver. Turns out a wooden spatula works to do it too. ;)
Mine had a lever on the end that I pushed down with my finger and the card popped out a little but then it won't come out any further.
the background jazz and tutorial compensate this friday boredem
My fingers have always worked fine, but i will keep this tip in mind for when it doesn't! thanks
And to remove a 4090ti you shall require an electrician and forklift. :)
I know right!!
a pull tab should be added now to all motherboards at the far right as the Graphics Cards are getting way bigger
Last time I struggled for 30 minutes to push it with a finger. Now after seeing this video it took me 2 seconds to push it with a credit card.
Extremely helpful. Just used this to get my GPU out. Thanks.
STRIX motherboards are known to be faulty. i slotted in a 6800xt and now i want to clean it but the clip is practically wedged into the gpu, i had to use a hammer and a trim tool to tap the thing loose.
Well hey glad to hear I'm not the only one having this issue, just broke the clip INSTALLING my 4090, such a shame. I like hearing and getting the comfort that you don't *need* it especially because I'm getting an anti sag mount but still. It sucks. Idek how to get it out now... my first top of the line GPU and I go and mess it up lol
We have all done it....I have never broken it with the gpu stuck... def interesting!!
@@DLMtechgarage Yeah, hope it doesn't impact performance in any way! But yeah I bet it's fine, and when I get it out when I get my ssd I'll be real real careful with the screwdriver! I don't have one of these tools but man do I not want to break my 4090.
Lol the clip is not needed so cheaply made its ridiculous
same here bro. i accidentally loosened the clip when installing my 4080 super. hopefully its fine in the long run
Chopsticks do the work for me 😂
Thank you. I used chop sticks and it worked 😂
If you want To remove it Press the gpu To The clip and then push the clip down. It will be so easy
ive just recently pulled out my GPU (the proper way of course not just yanking it out lol) because some dust kind of accumulated in the PCIe slot causing my GPU to have a poor connection.
since I booted it up and it was showing no display on the monitor but it boots up fine (was able to confirm this because the windows startup sound would play through my speakers)
used a canned air duster to spray the PCIe slot, dusted the pins on the GPU itself aswell and plopped it back it, everything was back to normal
Great tip! Was thinking about how to push that down when I have a fat heatsink in the way.
Thanks! for this. I used a "spudger" from an old iFixit repair kit.
There is no reason for these tabs to be there, i hated them from day one, with all of my builds the first thing i would do is take the cutters and remove it, card is tightly secured to the case, using any kind of latching mechanism to the PCIE socket is a terrible idea, this is frankly a feature i want the manufacturers to simply stop using, it's shit.
Any tips on removing the clip altogether before installing anything on the slot? I think the clip should not exist at all; as long as you screw in the card tight enough, the clip will not be of benefit.
This design was okay when graphics cards were small, so the clip was easily visible and reachable, but this was a long time ago. Today, on top of the sheer size of the card, a thick backplate may make pushing the clip with a finger very hard even with good clearance, since it may partially cover it. This design should not be utilized any further is my opinion, all new mobos should come with something easier/more advanced, and most importantly safe for the other parts to operate with.
agreed the design is outdated and gpus r way bigger now
Simple and direct to the point
This was an absolutely brilliant "how to."
And I've watched a ton in the recent build, this was one of the most succinct. Kudos.🥇
Just about to order a trim tool set. (Which I never heard of before this vid) also liked, and subbed, you deserve it
Thank you. 👍🏻
Wow, thanks!
You're the man!!!! Imma make a video like yours for the g15ce case. Very much appreciate your video!
i broke my clip last night. I'm freaking mad...but it should still work.
pressing the tab. wont come out. it moves slightly never all the way
There's a special place in hell for whoever decides that clip is a good idea.
I've damaged a Lenovo motherboard from trying to fight that demon of a clip.
lol, I feel the same way and have done it too!
I recently had this issue a few days ago where my monitor isn't displaying anything when everything is connected & the light on the motherboard stays white the whole time
Thnx, you saved me a new Rog Strix x570 motherboard...
I’ve got the thing pressed down but the gpu still won’t come out
got to wiggle it back and forth and make sure it is not getting stuck on the slot below it.
I got really lucky that one of my cats toys was a plastic stick with a rubber end....have a noctua air cooler and you'll never get in there without a tool or removing the cooler as a whole
be quiet dark rock pro has the same issue!!
my PCIE clip broke off when i was just using my finger, not even sure how since i wasnt putting that much pressure on it. no other damage apart from that broken piece, everything still works fine. Had to take out my GPU to reach the smaller PCIE slot for a wifi card
man this would’ve been useful back in March when I got a 3050 (returned it because it was a downgrade + never got it in the pc) This info will be useful when I buy another graphics card which will hopefully be soon
i got this problem... even with it feels release gpu wont come out. never took out my gpu since i install 😝 i got not problems before my current pc
I removed the broken clip, took out another clip from an old motherboard, shoved that one in and I'm back on, the motherboard was scratched too but seems like msi did a good job with their x570 tomahawk, we'll update if anything comes up
Zotac rtx 3070ti and Asus b55f g WiFi - it is impossible to remove the thing. I could hit it with a sledgehammer it won't even unclip
Sadly I already have a broken clip so I have to find a way to remove the GPU. Its only the part of the clip that you use that is broken so there still is clip there only where its hard to reach (behind the GPU)
How did you remove it
A small pencil works as does a wooden chop stick.
Great Video helped me and my friend remove his 3060 for the first time 👍
My issue is that I have more stuff mounted to it than the clip. It has like this metal wedge that holds the graphics card to the motherboard. I have a Msi 3060ti
Thank you so much I was getting ready to cry I couldn't figure out the plastic tab😭
Glad I could help!
The clip on my Aus x570 is horrible it’s somewhat mangled like it was chewed on by a cat or dog.I don’t know how it could have happened but yeah hard to remove my gpu every damn time I struggle.
I wish these companies would design components with users in mind because whoever made this clip deserves to be fired it’s so soft and bendable plastic not normal at all.
my motherboard has the q-release for the top pcie 5.0 slot. it makes my life easier but i had to use both of my sore hands to wiggle out my Tuf card out of the slot causing a chaos :,)
I removed one of the fans on the cooler to get to the pin and i cant press it down. I have removed the gpu in the past and i remember it being difficult but i dont remember it being this difficult.. Good thing the gpu has a backplate and theres some metal thing right next to the pin just like yours, so i wont damage the motherboard.. From experience i think these pins start to become more loose over time if you tend to remove the gpu often, if not then theyre very difficult to deal with.
Dude, you're the best. Been having so much trouble with this shit. Goddamn.
doesnt work for me.
the 2nd pci slot for the GPU is destroyed because of this crap system, now my motherboard is still functionin though I lost audio.
My main gpu slot is now in danger cause the GPU will not release