Onefinity CNC. Beginner Series - Multiple Passes / Multiple Bits
Вставка
- Опубліковано 12 сер 2022
- In this video, I breakdown the most complicated file I've cut yet. I bought this file when I was brand new to CNC and waited until I became more comfortable running my CNC before I attempted to cut it. I share many great tips throughout this video. Thanks for watching!
Item available for purchase from my Etsy store
www.etsy.com/listing/12312574...
Acrylic Paint amzn.to/3Bc5Y8d
Bottle Cap Magnets amzn.to/3LmnBXo
Bottle Opener amzn.to/3JkrLgG
Canvas amzn.to/3oEMkwK
Circle Center Finder amzn.to/3LmZTdV
Clock Hardware Kit amzn.to/33bvj5w
Keyhole Bit amzn.to/3uHpojV
Magnets For Dice Vault amzn.to/3sS9imi
Masking Tape amzn.to/3GJ8Ydc
Nylon Bolts amzn.to/3JtmIKW
Nylon Washers amzn.to/3gOv2c5
Nylon Wing Nuts amzn.to/3Lz31mY
Slate Coasters amzn.to/3LiZglo
T track amzn.to/35AAU6b
V Bit amzn.to/3HH2ygb
K40 Laser
Website monportlaser.com/
K40 Laser (exact one I have) bit.ly/3tDwPbd
Use code Steve6 for a discount!
K40 Mods
Air Assist Pump amzn.to/3ydhLDE
4" Inline Exhaust/Smoke Vent amzn.to/3EW1dSa
C02 Laser Safety Glasses amzn.to/3OIfO85
Inline Water Flow Indicator amzn.to/3vnbHXw
Lab Jack Stand amzn.to/3EYPqCF
If you would like a custom product and would like to support what I do, please visit my Etsy shop at etsy.me/3DRVM5C
If you would love a discount on some very good CA glue- the same product I use, please use this link - you get a discount and I get a small percentage. Thank you! Just use code SJS10 at checkout!
www.starbond.com/?rfsn=634673...
#cnc #onefinity #beginner
Thanks for this video. I purchased my Infinity this past spring, and this video really helped me get up and running.
That’s awesome - thanks for watching! I’m about a year in and still have so much to learn
Quick question, which bit did you choose for the keyhole settings? Or did you add a bit for it? Thanks!
Easel has an “app” that is called keyhole. So, as long as you choose that app, any bit you tell the machine that you are using is irrelevant. The only thing you MUST do is set your depth of cut to make one full cut only. So, in my case, .33 is the perfect depth for use with my keyhole bit. So I just set my depth of cut to .33” and it plunges down, makes one cut , and then backs out. Hope this helps
@@SJSSawdust This helps out immensely! Thank you!
When you change your bit do you aways have to set it at zero
Yes. The machine should return to your X Y zero, but your bit will be installed at a different height so you have to set your Z zero in order for everything to align properly
Where can I buy the file ? Nice video
Thanks. This is the etsy link from the seller I purchased it from
www.etsy.com/listing/775860984/
Thank you sir.👍🏽