Did you enter the original admin code? Sounds like you might need to enter that first before you add your own codes. Should be on the guide, maybe on a sticker?
After adding my user code and testing the code and lock, it works opposite. Inputting the code locks it and pushing the Kwikset logo unlocks it. Any ideas what to do?
Hmm... I wonder if that's an issue with it being "left" or "right" handed in the door (see the installation manual). I'd reach out to Kwikset for assistance. Good luck!
When I press the program button, it just beeps once (not the correct sound according to installation videos) and the Logo flashes red. Batteries are new and the wire is firmly connected. You mention an admin code-- I don't see one anywhere and my instructions do not mention such a code. Please advise.
The manual for the unit doesn't indicate that you can do that and I haven't tested it out. Why are you using the key with a smart deadbolt anyway, however?
My code works great~WITH the key in the lock! Without the key it acts like it’s jammed & the bolt won’t lock or unlock…unless the key is IN the lock of course then it bolts & unbolts perfectly with the code. 🤷🏼♀️🤦♀️
Hi, my son took the back off & reinstalled it with the key out of the lock. Put it back together & it worked perfectly! Lol. Crazy~ but at least we figured it out! Thx for your reply! 😉
I had this same problem. To fix it I had to remove the exterior assembly and rotate the flat blade 180 degrees. Reassembled and it should work correctly.
What's hanging you up with the install? If it's that hard, it might be that your door is too thick and/or the cutout hole isn't exactly the right size?
Thank you for making a video, I’m happy to say it was as easy as you’d said.
Glad to hear. I've installed about a half-dozen of these now and it is pretty darn straightforward!
Left and right hand?
how to change the key on this deadbolt to the house key that matches every door in the house
After setting up when- I’m trying to program my code, it flashes 5 red after every code i try to put in.
Did you enter the original admin code? Sounds like you might need to enter that first before you add your own codes. Should be on the guide, maybe on a sticker?
After adding my user code and testing the code and lock, it works opposite.
Inputting the code locks it and pushing the Kwikset logo unlocks it. Any ideas what to do?
Hmm... I wonder if that's an issue with it being "left" or "right" handed in the door (see the installation manual). I'd reach out to Kwikset for assistance. Good luck!
What’s the difference between the 250 and 260? Do either have the smart watch or Apple phone entry?
This should help you out: www.kwikset.com/products/electronic/keyless-entry
When I press the program button, it just beeps once (not the correct sound according to installation videos) and the Logo flashes red. Batteries are new and the wire is firmly connected. You mention an admin code-- I don't see one anywhere and my instructions do not mention such a code. Please advise.
You'll need to reach out to Kwikset support. Good luck!
Great video . Was super informative and helped me a lot! Thank you !
You're welcome. I appreciate the feedback!
How you get the key out while in open mode
The manual for the unit doesn't indicate that you can do that and I haven't tested it out. Why are you using the key with a smart deadbolt anyway, however?
Can you disable auto lock?
Yes. It's a setting you can change.
My code works great~WITH the key in the lock! Without the key it acts like it’s jammed & the bolt won’t lock or unlock…unless the key is IN the lock of course then it bolts & unbolts perfectly with the code. 🤷🏼♀️🤦♀️
Definitely something wrong with the lock or the install. That's an odd one. I'd reach out to Kwikset support for help!
Hi, my son took the back off & reinstalled it with the key out of the lock. Put it back together & it worked perfectly! Lol. Crazy~ but at least we figured it out! Thx for your reply! 😉
I had this same problem. To fix it I had to remove the exterior assembly and rotate the flat blade 180 degrees. Reassembled and it should work correctly.
How can i active autolock?
It should be detailed in the documentation.
Gotta drill new holes
That's too bad. Mine fit in beautifully with no drilling required.
@@AskDaveTaylor no drilling. You saved me today
I can not set a user code akd when I do it's never right wjen I unlock, easy to install yes easy to its shit
This is not easy at all been going at it for a hr lol
What's hanging you up with the install? If it's that hard, it might be that your door is too thick and/or the cutout hole isn't exactly the right size?
Got it to work thanks to your video the instructions didnt say to click 1 to program the lock it said to click 3.