How to Make Yard Dice. YARDZEE!
Вставка
- Опубліковано 9 вер 2024
- How to make Yard Dice:
This time on Build Dad Build I made a set of DIY Yard Dice (also known as Yardzee). Of course I had to put a BDB spin on it and torch the h3ll out of them before finishing them.
The How To level on this one is super low. You really just need a saw (I used a miter saw) a drill and a 5/8” Forstner bit.
The hardest part for me was making the jig to drill the holes in the dice. I’m not sure exactly what I did wrong on the first jig, but it just wasn’t centered. But, as with most projects, that failure lead to a second jib that worked just fine.
If I had it to do over again, I would use a different material for the top of the jig. I used a piece of backer board, and I noticed that the longer I drilled the holes were getting a little looser (the material was getting eaten away as I drilled).
But hey…I think they look really cool.
Don't forget to stop by my Patreon page!
/ builddadbuild
___________________________________
MATERIALS
1 - 8ft poplar 4X4
1 - 4ft X 4ft sheet of backer board (see above - I would consider something like acrylic or maybe plywood)
___________________________________
TOOLS I USED
*Amazon Affiliate Tool Links
(*amazon affiliate links)
Drill - amzn.to/2UhWwKk
(like my) Miter Saw - amzn.to/2EPzjKe
5/8 inch Forstner bit - amzn.to/2IT0Luk
(like my) Large Propane Torch - amzn.to/2EO8p5n
Small Propane Torch - amzn.to/2XEbIn6
Spray Polyurethane - amzn.to/2UoTCU0
___________________________________
Don’t Forget to Like, Comment & Subscribe:
tinyurl.com/ya...
___________________________________
ADD ME ON:
Instagram: / builddadbuild
Facebook: builditburnit
Subscribe: tinyurl.com/ya...
___________________________________
MUSIC:
AmpleTunes
ampletunes.com
SONGS:
Makers Gonna Make
Jimmy’s Jam
#yardgames #yardzee #yarddice