I changed the fans on my Corsair H115i, and after starting my PC it started to overheat in BIOS, and I heard a rattling sound as the pump was working. This video really helped, I unplugged everything, and let it sit upright for a good 2-3 hours and slapped everything together again, and it worked like a dream! Idle temps at 27 Celcius! Thanks again for the advice!
Hey just a note for anyone else having an issue with this product. The water evaporated in mine and needed to be replaced the cooling block was impossible for me to remove the screws stripped instantly the tube attached to rad was the only way to refill it. I would also recommend flushing out the remaining liquid. And replace with preferred coolant
To fix this. Go into your bios when you start your pc “f12” and whatever your pump is plugged into on the motherboard for instance mine was plugged into “system fan_1” 3pin, change “ systemfan_1” in the bios settings to %100 speed in bios. Save and exit.
Fucking life saver mate. My cpu was reaching close to 100°c just from being in the bios. I did everything you said and it’s working perfectly. Back to normal Temperatures thank you 👍🏻👍🏻
Thanks for the upload. Couldn't quite make out what you were talking about at the rear of the pc but it was helpful as were the comments. I tapped my hoses with a pen a few dozen times and the temps dropped from 58 to 85C down to 27C. Still keeps happening though.
i got the same cooler. i just hit my tubbing a few times. and my temps go from 50 idle to 22 idle XD. so i might just buy a new one, or open it up clean it and refill it. still annoying tho. the h115i cooler isnt even a year old yet.
para el q no sepa usar liquido colorate tapa la lamina de cobre q tiene unas mini canaletas y se tapa esa canaletas como si fuera cristal de duros y es por eso q la bomba llega un punto q el motro se funde y pierde potencia por ello se daña 2 cosas la lamina de cobre tapada y bomba q se daño por esto mismo ya intente ponerle una nueva igual y el problema es q se jode la bomba para ser mas claro la bobina se funde y pierde potencia por q los mini imanes se rompen conclucion no se puede rescatar la bomba el resto si como radiador,coolers,tubos todo menos la bomba y lamina de cobre q es la tapa por q se calcome el cobre tambien eso por el colorante
I took out just the fans and rad to clean the dust off and I put them back in now my cpu says it’s overheating to 90+ and keeps turning itself off, I tried following steps but can’t seem to fix anyone help?
Same issue here, rgb goes all red on startup on the cooler, icue showing 0 rpm for the pump. 3rd time this has happened. Other 2 times it randomly worked again for a few months then the problem returned. Awaiting response from Corsair. Pc was purchased in 2020 so the cooler and everything else is 4 years old. Feel like it might be time for a replacement.
Hi, i have the same issue and I'm trying to fix it. This video helps, but i didn't get the part regarding the back mounting, can someone please explain? Ps. English is not my mother language
I changed the fans on my Corsair H115i, and after starting my PC it started to overheat in BIOS, and I heard a rattling sound as the pump was working.
This video really helped, I unplugged everything, and let it sit upright for a good 2-3 hours and slapped everything together again, and it worked like a dream!
Idle temps at 27 Celcius!
Thanks again for the advice!
Hey just a note for anyone else having an issue with this product. The water evaporated in mine and needed to be replaced the cooling block was impossible for me to remove the screws stripped instantly the tube attached to rad was the only way to refill it. I would also recommend flushing out the remaining liquid. And replace with preferred coolant
To fix this. Go into your bios when you start your pc “f12” and whatever your pump is plugged into on the motherboard for instance mine was plugged into “system fan_1” 3pin, change “ systemfan_1” in the bios settings to %100 speed in bios. Save and exit.
Fucking life saver mate. My cpu was reaching close to 100°c just from being in the bios. I did everything you said and it’s working perfectly. Back to normal Temperatures thank you 👍🏻👍🏻
Thanks for the tip, couldn't figure out wth was wrong with my AIO after I moved. Thumbs up!
Thanks for the upload. Couldn't quite make out what you were talking about at the rear of the pc but it was helpful as were the comments. I tapped my hoses with a pen a few dozen times and the temps dropped from 58 to 85C down to 27C. Still keeps happening though.
i got the same cooler. i just hit my tubbing a few times. and my temps go from 50 idle to 22 idle XD. so i might just buy a new one, or open it up clean it and refill it. still annoying tho. the h115i cooler isnt even a year old yet.
WTF this worked for me i hitted 3 times the hoses and it went from 77 to 32 on idle jajaja
@@Char-nx3de xd yeah just to make sure to buy a new cooler. Before its to late.
why is your GPU in the seccond SLI slot
gd vid mate cheers
its the pump failure. i using two corsiar cpu coller always fail me. i went for coolermaster cp cooler much better.
para el q no sepa usar liquido colorate tapa la lamina de cobre q tiene unas mini canaletas y se tapa esa canaletas como si fuera cristal de duros y es por eso q la bomba llega un punto q el motro se funde y pierde potencia por ello se daña 2 cosas la lamina de cobre tapada y bomba q se daño por esto mismo ya intente ponerle una nueva igual y el problema es q se jode la bomba para ser mas claro la bobina se funde y pierde potencia por q los mini imanes se rompen conclucion no se puede rescatar la bomba el resto si como radiador,coolers,tubos todo menos la bomba y lamina de cobre q es la tapa por q se calcome el cobre tambien eso por el colorante
nice video
I am having almost the same problem as well damn video quality is 240p i cant really see or understand the motherboard fix , can someone help
my Corsair H100i v2 cooler gose red wen i play black ops 4 and the case gets rly hot
I took out just the fans and rad to clean the dust off and I put them back in now my cpu says it’s overheating to 90+ and keeps turning itself off, I tried following steps but can’t seem to fix anyone help?
hi, you fix the problem?
Hey buddy, I ran into the exact same problem, was also just cleaning the radiator and then red. Did you manage to fix your problem?
Same issue here, rgb goes all red on startup on the cooler, icue showing 0 rpm for the pump. 3rd time this has happened. Other 2 times it randomly worked again for a few months then the problem returned. Awaiting response from Corsair. Pc was purchased in 2020 so the cooler and everything else is 4 years old. Feel like it might be time for a replacement.
Hi, i have the same issue and I'm trying to fix it. This video helps, but i didn't get the part regarding the back mounting, can someone please explain?
Ps. English is not my mother language
he means the backplate was loose and it was too far away from where it was meant to be
Why leave it ?