HOW TO Remove & Install RSX Fuel Pump | DIY Guide Walkthrough
Вставка
- Опубліковано 4 січ 2024
- In this video, I walk through removal and installation of my RSX Fuel Pump.
I'm removing an aftermarket 02-04 fuel pump which has caused some issues with incorrect readings, specific to the fuel sending unit, and I'm replacing it with an 05-06 RSX type S fuel pump. I'll show a comparison of the two pumps and walkthrough unboxing as well.
Follow me and subscribe to my channel for frequent updates on my DC5 build including this Acura RSX fuel pump replacement.
social media
IG: revcircle
TikTok: www.tiktok.com/@revcircle
Amazon Store Recommendations: www.amazon.com/shop/revcircle - Авто та транспорт
that rubber piece you took from the old one always gives me a hard time going into place
Yes same here
Would the 06 pump work on the 05 RSX?
Yes, the 05 and 06 RSX should be the same OEM part number which is the safer swap. I believe as long as you are matching the model, so Type S only works for Type S, and base mode only for base mode. They seem to still be selling this as the dealer and parts website, but discontinued it for 02-04. Otherwise I would have bought that.
Do you have the part number by any chance?
My 06 type s has been smelling like fuel after pumping gas for a while mileage has been pretty bad , hoping this solves the issue
The part # of the 05-06 Type S is 17045-S6M-A30. Since you're adding it to an 06, it'll be a perfect fit. I see they still have these new pumps in stock at AcuraPartsWarehouse for around $380.
Might want to pop open the fuel door under the rear seat to see if it's leaking. Maybe the plastic housing cracked, but you'll know for sure when you take a look at it.
@@revcircle thank you 👍
@@michaelhuerta3922 you’re very welcome.
What is that tool you used to take off the black part of it?
I bought the OEM Tools Fuel pump wrench: amzn.to/4c1Zzxj
How did you get the ring cover to go back on? I’m in the process of doing mine rn and the ring that holds the fuel pump down will not screw back on
the black plastic ring? If so, you can use the one you took off the old one, but make sure you use the rubber piece of the new one as thats the gasket that insulates from the pump to the tank.
Yes I meant that and the old nor the new will catch threads
@@carliesueann9415 Mine caught the threads. Why doesn't the old one catch threads? Didn't you remove it upon installing?
Did it work on the 2002?
It worked on my 2003
@revcircle nice I'll be picking one up aswell 💯
@@revcircleI just ordered a 05-06 unit for my 2003. It's a Delphi unit, which should be better than some generic brand.
@@XenomorphLV426 I'm never tried the delphi unit, where did you get it? And let me know how it works
@@revcircle rock auto