Why Is My Ford Key Fob Not Working After A Battery Change?
Вставка
- Опубліковано 28 сер 2024
- The Ford key fob is a great convenience, but it can also be a source of frustration when it doesn’t work properly. If your Ford key fob isn’t working after you’ve changed the battery, there are a few things you can try to get it working again.This is a common problem that many Ford owners face. In this video, we will discuss the causes of this problem and how to fix
it.
If you'd like more information you can read our guide: vehiclefreak.c...
We cover the following questions and topics:
why does my key fob not work after replacing battery
ford key fob not working after battery change
key fob not working after battery change
ford fusion key fob not working
ford edge key fob not working
ford key fob battery replacement
ford key fob stopped working
f150 key fob battery
new battery in key fob not working
We hope this video was helpful!
DISCLAIMER: Any information we provide in this video is intended as education. Vehicle Freak and it's operators shall not be liable under any circumstances in case of any injury, damage, or any other accident that may occur. By watching this video, you agree to these terms. Vehicle Freak and its operators may earn from qualifying purchases as an Amazon associate.
Watch from 3.00. Till the it is BS.
thank you 👍
You're doing god's work
Department of redundancy department
Exactly!!! He repeats himself 5 times! Geez
In car with doors closed insert key into ignition 6 times in 10 seconds leave key in and turn to on position press and release the lock button on the fob turn key to off position remove from ignition doors lock then unlock. You're welcome.
The reset is what my key fob needed. Thanks!
Well done!
What happened to three steps it seems to turn into around nine steps!
Key fobs don't typically use volatile memory. It shouldn't lose its programming from a battery change.
MY 2012 Focus does not have a freakin ignition or any other place to stick the key into! Nobody seems to address this. It is a push start ignition.
Plz tell me you got this figured out
Did u figured it out?
@@abaddonguecubu6588 What is remote started? And where in center console? I dont understand. I have key fob with hidden key in it, key slot with no position marks in steering column and engine start/stop button in center console.
@@bloodivi guess you found it now but theres a small black cover on the side of the steering column (where the key would go usually in any other key start car) prize the plastic cover off with a flat head screen then youll see the barrel. Insert the small key part into the ignition barrel (it just pushes in, dont turn it) then press the push start button. Programming can only be done at home if you have 2 keys already using Forscan, otherwise its a trip to the stealership for a new key and programming 😢
I feel your frustration.! In deep freeze and deep snow. No F*ing key. How ridiculous
Close all doors
Insert and remove 6 times
Insert set to on position
Press lock button
Set key to off and remove
Doors should lock and unlock
(Ignore for my future reference)
So my remote did nothing after my wife programmed an old remote while I was out of town for work. When I returned home and tried to use my remote start it didn't work. The doors would not cycle and nothing would happen.
My first thought was dead battery on my key fob remote. So I went to Fred Meyer Jeweler and got a new battery. Tried it in the Fred Meyer parking lot and got nothing.
I Google a few UA-cam videos and had tried to reprogram the key fob twice with no luck.
I tried again tonight after watching this video and got an idea. I remembered that when I had a locksmith program the 1 and only key I had the first time, the truck started once or twice but it wasn't quite right. I had to press the lock button once and start button 3 times instead of 2 times before the truck would start.
So tonight I tried again while doors closed inside my truck to cycle the key on/off 8 times and back to the on position and heard the locks cycle. I turned the key to the off position and pulled it out of the ignition and tried to unlock and lock the doors. Nothing....
So I decided to do it again 8 times and then left the key in the ON position and then started my truck with the key manually. It started up and the locks cycled again. After a few seconds I turned off the truck and the lights flashed and the locks cycled again. Pulled the key out of the ignition and then tried the lock/unlock buttons on the key fob and they fkn worked. I tried my regular remote start cycle which is lock button and then start button 3X. It started. I'm back in business! So long story short.
Try other cycles. I have a 2011 Ford F-350 Powerstroke diesel and it took 8X on/off ignition and then end in on position, then start the truck. Then turn off the truck and take key out of ignition and try lock buttons, Lock, then unlock. Then remote start. They all worked! Pumped and excited. Although I ordered 2 new remote start keys the other day. I suppose I will have backups now. BTW, I had the last key cut at the local ACE hardware for about $3. Which I will return to do again. Then try this cycle with each new Key. If only have one key and it's not programmed you may have to call a locksmith like I did the first time who has a scan tool made to program keys.
This could have been 3 mins long,very,very,very repetitive,just get to the point.
What a droning Turbo Pillock
Ffs get to the point
Get to the POINT!!!!!
redundant
Thus video is so damn depressing
AI written. Terribly repetitive text.