TURN ON CC! This Garuda Gear PH GG68B Mods kit from PMX.GG surely made everything easier--well except for the case trimming and USB-C hole enlargement (this sounds lewd). SHOP LIST: Mod Kit PMX.GG shope.ee/3Ksk31S8Ag Garuda Gear GG68B shope.ee/1AlX4T31Or Oria Electric Screwdriver shope.ee/3pkbysgKn2 Lube 205g0 shope.ee/4Ux9ljKSIa Lube 105 Oil shope.ee/8K9sKovmYi Check out my Socials: linktr.ee/pusakalmkb
cool build! wondering if you could do battery mod? I have two of the same batteries ng GG68B, was thinking if i could put those two in parallel to double the battery life. or 2x na 3000 maH, para 6000maH for ultra extended on-battery life.
Amazing job the sound was so good to the point that it doesn’t sound like a budget keyboard at all!!! What are your thoughts on the Finalkey V65? Was eyeing this board out and could be a good value since it is aluminum and dual mode.
I have one, it's a great sounding board and is very well built. The biggest downsides are if you're using it on battery. The battery life isn't that great, you'll have to charge it every 3-4 days. It doesn't alert you when battery levels are low, it just dies, and it doesn't report battery life over Bt. I don't mind this, but you can't use RGB on battery either. Overall it's a solid board, I just wish it was a bit better wirelessly.
@@DaveAlkema Thank you so much!!! It wasn't an issue to me though since I have an RK68 that I bring to work. Then when I get home I would always plug it on my pc to do some browsing and to charge it. Any idea what's the polling rate of the Finalkey V65 R2 though? I wanted to use it too for rhythm games.
interesting, i wonder if it can also be done on the G100 layout. I might need a complete keyboard when doing my thesis, so I am considering the compact full layouts.
i think your screwless builds would probably work well with the rakk ilis since it has a magnetic top cover so it wouldn't spill out in case your cat drops it lol
from my experience with my Feker IK75, I had that poron switch foam along with pe foam, it made the sound of the keyboard clacky; though it is accompanied by the cherry profile keycaps and JWK black switches.. aaaaaaaand with some of your backend mods hehehe 😆
![[CC] Turned a Budget Keyboard into a Bakeneko | Garuda GG68B](http://i.ytimg.com/vi/YEZ1Ze_1Ejs/mqdefault.jpg)
![[CC] Turned a Budget Keyboard into a Bakeneko | Garuda GG68B](/img/tr.png)
TURN ON CC!
This Garuda Gear PH GG68B Mods kit from PMX.GG surely made everything easier--well except for the case trimming and USB-C hole enlargement (this sounds lewd).
SHOP LIST:
Mod Kit PMX.GG
shope.ee/3Ksk31S8Ag
Garuda Gear GG68B
shope.ee/1AlX4T31Or
Oria Electric Screwdriver
shope.ee/3pkbysgKn2
Lube 205g0
shope.ee/4Ux9ljKSIa
Lube 105 Oil
shope.ee/8K9sKovmYi
Check out my Socials:
linktr.ee/pusakalmkb
How much does the mod kit cost? Do you think this could fit on a ciy tes68?
@@vince9784 You can request for a specific keyboard from PMX.GG :)
The wider plate foam is a genius move. The music choice is also a vibe
Big brain moment right there with the execution of the extended plate foam. Love it mahdude
YOU SHOULD PREP FOR TOMORROW'S STREAM
I believe Garuda GG82G is next? I can't believe it has been 2 years since I last itched to buy a new keyboard.
love it!! 🙌
nub question, for the pmx mods, did you select RK68? Thanks
cool build! wondering if you could do battery mod? I have two of the same batteries ng GG68B, was thinking if i could put those two in parallel to double the battery life. or 2x na 3000 maH, para 6000maH for ultra extended on-battery life.
i want your mousepad where did you get it
Amazing job the sound was so good to the point that it doesn’t sound like a budget keyboard at all!!! What are your thoughts on the Finalkey V65? Was eyeing this board out and could be a good value since it is aluminum and dual mode.
I have one, it's a great sounding board and is very well built. The biggest downsides are if you're using it on battery. The battery life isn't that great, you'll have to charge it every 3-4 days. It doesn't alert you when battery levels are low, it just dies, and it doesn't report battery life over Bt. I don't mind this, but you can't use RGB on battery either. Overall it's a solid board, I just wish it was a bit better wirelessly.
@@DaveAlkema Thank you so much!!! It wasn't an issue to me though since I have an RK68 that I bring to work. Then when I get home I would always plug it on my pc to do some browsing and to charge it. Any idea what's the polling rate of the Finalkey V65 R2 though? I wanted to use it too for rhythm games.
@@Clau5380 It's 1000hz wired, 125hz in BT
you did a great job
Nice ka dol! unsay ngalan anang gigamit nimo na tool para mupry or muhelp fit sa oring?
Metal crowbar
interesting, i wonder if it can also be done on the G100 layout. I might need a complete keyboard when doing my thesis, so I am considering the compact full layouts.
My gg100b is still in-transit so we'll see :)
i think your screwless builds would probably work well with the rakk ilis since it has a magnetic top cover so it wouldn't spill out in case your cat drops it lol
Haha yeah. Missed that keyboard tho
What's the benefit of making the keeb flexible? Sorry if noob question lol. Currently using GG68B.
Very welcome to ask! Lesser fatigue when typing long hours on fingertips.
@@pusakalmkb yun pala effect, okay flex keebs gang na ko hahaha
@@motsorejola7949 hahahahaha g boi!
Hello po, do you custom po? How much for this kind of setup po?
is poron switch foam clacky po or thock? Or same po with poppiness ng pe foam but deeper?
from my experience with my Feker IK75, I had that poron switch foam along with pe foam, it made the sound of the keyboard clacky; though it is accompanied by the cherry profile keycaps and JWK black switches.. aaaaaaaand with some of your backend mods hehehe 😆
Do you remove the battery and still works?
Yeah I removed the batt just direct wired
May software po ba ito?
yes
pwede po ba magpa mod sa inyo?
Too clicky loud for me.