Electronic Throttle Body Operation and Failure Issues
Вставка
- Опубліковано 3 лип 2024
- This is a video on how the electronically control throttle body works. Also, some of the common parts that fail and how they fail.
This specific throttle body is off a 2005 Volvo S60
A DC motor drives a toothed plastic gear, that in turn drives the throttle plate gear. A potentiometer sits on the throttle gear and returns signals to the computer through the sweeps on TB cover.
Common failures are the swept area of the potentiometer getting wear marks in them, the sweeper arms breaking down, and the plastic teeth breaking or wearing off of the gears. - Авто та транспорт
Excellent explanation.. now I can see why its somewhat normal for these to just naturally start to fail around 70k miles on the car.. now I don't feel so bad changing it out.. nice vid
Wonderfully explained. I have BMW E70 X5 went into limp mode with trouble code 2CF8, 2CF9, 2CFA Throttle-Valve Potentiometer 1 & 2. This helped - new throttle body. Saved money, time and alleviated my frustration. Thank you.
Excellent presentation -- the most helpful I've found about the throttle body.
Great explanation and excellent up close video pix of the worn parts. You are the Man!
This video is excellent!!! I love the no bullshit approach and it has all the info I need to look at my throttle body and what to look for and where to look on my VW Polo Match 9N. Good work guys!
See my main comment for some more info and tips
I took the throttle body off my 2004 Volvo V70R(it's a job), and it looks exactly like this one. Inside the sensor I see no teeth wear, and I cleaned the contacts. My Volvo has 129,000+ miles on it. Great video!
Amazing video with clear explanations! Very helpful! One very interesting thing that I got to know from this video was the small oscillatory motion of the potentiometer's wiper arm against the resistive tracks which leads to some wear.
Great video! Thank you. These suckers are expensive as hell, and now I know why/how these get re manufactured, new gears, , gasket, clean it up and resell for $150.....Bought one of these aftermarket, and having similar issues just 6 months later. I am cracking open to see if I can fix now.
Very helpful and great explanation of all possible failures!
This is a great video and explains clearly what is the root problem of a worn out throttle body malfunction.
Check this first instead of buying endless cans of cleaner spray. Especially if the car has done a lot of miles
11.4.17. A superb tutorial! ......Concise explanation!🎯
O
Great job in explaining just what is inside the TB gear head and how it all works.
Great video, explains some of the intermittent issues I was having with my Bosch Throttlebody on Audi Rs5, only 80,000 and 10 years, but occasionally goes into limp mode with everything connected to the PCM flashing up (Stability, Sport Diff) which of course cascades to the TPMS and Handbrake. Not cheap to replace 2 thats for sure :)
Finally a good explanation. Question for anyone who think they know. I was getting some strange throttle position readings on my scan. I have an Accelerator Position Sensor and this Electronic Throttle. When I checked, the butterfly is open all, when I try to close it manually, it opens back under spring tension. When I start, it still stays open. I opened it up, cleaned it out although it was pretty clean already, tested the motor, it works. Im debating whether it is the throttle, or the sensor on the pedal. Thanks..
Thanks god someone made this video !!!!! Now I understand ! There no way that someone can rebuild this! Thanks you again !
Took me back to my MV-Engineering days in college. Many thanks!
Super duper good explanation and quality video with great detail
Excellently explained. Bravo....
You the best Throttle body expert around bro :)
Thanks
looks like maybe you fell off the youtube sphere but man, this is an excellent explanation. Thank you so much for taking the time and honestly saving me the time of opening mine up to try to rebuild it. is so much more likely that the gears shelled each other out than that the traces or solder joint failed.(as was my previous hope) Awesome vid and would be thrilled if you came back to it.
Loved it! Great way to see the inside of a throttle body
Cheers
I also want to say thank you for your video. I forwarded your video to the mechanic working on my car, given I currently am experiencing this issue. I have to go with the simple acknowledgement of plastic parts tied to electronic sensor is a lousy design.
I get the feeling the plastic parts (usually a nylon type plastic) are used due to weight \ mass and the speed & percision that that particular gear needs to be moved at. Aluminum would still be heavier than plastic...and of course Titanium would put up production costs.
Excellent Tutorial. Well done and thank you.
Awesome vid. I have an '05 Tundra V6 w/ 140k miles. Recently cleaned my throttle body (yes, with it disconnected from the vehicle), put it all back together and it threw a p2103 code. The plate covering all of the electronics and gears on my model is riveted in so I wasn't able to take it off and check things out. I'm going to do a resistance check on it tomorrow and if it's out of the specified range maybe I'll just drill out those rivets and have a look. Liked and subbed!
Great little video. Hopefully helps me solve issues with my 2006 Alfa 156!
Sir, Excellent video. Very well explained.
Thanks
Thanks you for the quality video! Great tips for diy! I learned something new here!
Fantastic. Very educational. Congratulations on the great work. Thanks for sharing knowledge.
Thankyou
@@SkyhookStudios can the flap still work fine but not communicating with the computer so no revs. I'm just wondering if somthing like this is possible 👍👍
@@SkyhookStudios thoes gasket are bigger you have to push it down
Excellent brake down cleared up a lot.
Excellent informative video, thanks👍
2006 S40 T5, 255K miles. Here seems to be a good place to share the following (this video helped me resolve my issue).
SYMPTOMS:
Constant P2281(Air Leak between MAF and Throttle Body) and random misfire on all cylinders (P0300, P0301, P0302, P303, P304, P305). Also, intermittent P2188 (System Too Rich at Idle) and P0170 (Fuel Trim Bank 1).
TROUBLESHOOTING:
In the last almost 2 years, changed pretty much everything there is to change (Spark Plugs, Coils, Injectors, VVT Solenoids, Turbo Check Valve, Camshaft Position Sensors; fixed failing insulation on several wires of the main engine harness, even considered replacing the ECM), cleaned Throttle Body and MAF, still constant misfire and P2281 😞.
Watched this video, disassembled Throttle Body, expected to find worn gear teeth (255K on the beast and clicking sound from the throttle body), teeth looked good. Potentiometer tracks and contacts looked good as well, no unique wear.
PROBLEM:
Since already there, checked resistance directly on the motor contacts, got between 28 and 35 Ohms while turning the rotor (should be around 1 Ohm or less). Removed the two screws and pulled the motor out, found significant carbon buildup on Commutator, brushes still had plenty of material.
FIX:
Cleaned/scraped/sanded/sprayed Commutator as much as possible (access is a bit challenging), got to shiny copper (even if not too smooth), got resistance down to just over 1 Ohm at the motor.
Note: On my particular model (2006 S40 T5), the motor resistance can be checked between the throttle body's Pins 1 and 4 (a bit hard to access while installed on the car; as an alternative, use Pins 74 and 75 on the larger connector of the harness that attaches to the ECM at the front of the air box; look for single-digit Ohms, preferably less than 2 Ohms).
Reassembled, installed Throttle Body, not a single code after 100+ miles (before that, codes were usually popping up within a few miles) 🙂.
PROBABLE FAILURE PATH:
Due to gradual carbon buildup on the throttle body's electrical motor Commutator, the motor eventually lacks sufficient power to counter return spring force and intermittently lets the throttle body Plate move towards idle. This causes unexpected pressure difference between sensors within the intake path (P2281). These short random failures (less air than what the ECM commands) catch a particular cylinder off fuel/air balance, eventually causing misfire to all cylinders. A prolonged failure would be registered as rich mixture (P2188 and P0170).
Information in your post is priceless! Saved. Thank you!
@@samgrieg2542 A few thousand miles later, absolutely no issues 😀. Glad someone else could use the info.
Great explanation I learned a lot thanks !!
wooooooooooow, got a p1220 error code; am gonna rip open my throttle position sensor with confidence now. great video
Thanks, very informative!
Excellent tutorial. Thanks
So informative. Having my 2015 F150 throw this code while on the highway and going into limp mode sucked
Very well explained, thanks
All Renault Clio II drivers should like this video...all throttle bodies of this car fail at 80 to 100k klm... So so common...renault Clio II throttle body is almost identical to this one. Managed to open and save mine for about 10thousand klm but then a tooth on the gearing broke completely.. There is Bosch potentiometer in the Clio throttle body which never fails... What brakes is the plastic gearing. So payed 150euros for a new aftermarket throttle body(original costs about 500euros if you find it).. Thank you for the useful video. LIKE
Great explanation. Thanks
YOU NAILED IT!
Oh my gosh this was so helpful now i know why my Sti is stuck in limp mode with an aftermarket TB i tried to get away with using a rivet style body and a clip on style tps cover but ill probably just order a new stock one since its probably worn... I always could hear the connector buzzing (i got a new connector plug on the way too)
Thank you for your help.
I have this issues on my Nissan Livina... Thanks for the video...
wow, thanks for this info! greatly appreciated
Thanks bro. Appreciate your vid. Best out there
Thank you guys for kinda answer.
🔥🔥🔥 great information brother
Thanks. where to buy parts to fix those? Also thank you for showing that it is ok to move the plate after disconnect.
Really well done thanks.
Excellent video thank you
thanks that answered my questions. I am going to get a new one and don't mess around with it.
Nice and useful video
icemaker gears work somewhat the same way and what would happen is the sweepers would eventually scrape copper off of the gear wheel, and bridge the circuit across the gaps.
awesome explanation thanks 👍
Well explained. Thanks
Great video!!!
amazing explaning . thanks
amazing... thanks..
same problem here... Renault Laguna 1.8 16v mk2..
Cheers
i have luck..
only with carb cleaner , all on place, working perfect..
but still thanks...
cheers
I
True ownership of your craft. Thank you
Very nice, thank you.
Just had a bunch throttle body codes for my 2005 mustang. The magnets glued to the case of the motor had loosened up and jammed up the motor. I glued them back in to fix it while I wait for a new throttle body.
Great video with good in-depth explanation, could issues with the throttle body cause problems with a delay in 2007 V70 auto gear shifting or harsh kicking when shifting from park to reverse?...
I've got an '06 XC70 that's throwing MAF codes, fuel trim, O2. New MAF, new plugs, cleaned the TB. No codes for TB, but thinking this could be the problem, since I didn't check the gears and POT when I had it off. Going to check PCV too
Exact same TB as the Alfa Romeo 156 2.0 TS, had just cleaned and opened it up today
Thank you very much
This just helped me fix a Verizon generator in indiana thank you brotha haha
One of the greatest videos I have seen about an electronic throttle body. 2 questions, is that a BOSCH TP? How many KM/miles on it that there is so much wear on the plastic threads !?
Good video
Great explanation and helped my understanding of the fault - easy when you know how and new throttle body ordered for my Alfa GTV
Thank you so much
Thank you.
Thank you.
I may have this gear wear problem on my 76,000 mile Corvette Z06. The engine jerks a bit at low throttle. If there is play in the throttle body gears, I could see how the butterfly may be flopping around a little.
Thanks Sir
Thanks for the " edgeumacation" My Dodge Journey is doing the same systems, but no codes for the throttle system. The only code is for the camshaft sensor. Replaced the sensor. Problems did not go away. Im thinking about replacing the throttle body anyway and take the gamble that, that is the problem. The $200 + price tag gives me hesitation
Thanks for the video you have explained so many things but please can you show us it's wiring diagram
well done thanks..
Good video.
Well explained.
now this is how you explain issues
Nice video..
Sir, appreciate for making things clear. When I check my car's electronic throttle body with Forscan, desired and actual throttle position does not match. There is 2.3° difference at idle and 5°-7° difference on load. Desired position 2.5°, actual position 0.3 at idle. Would it be sth to do with these plastic craps?
This remind of VHS mechanism, repaired so many of them in the early 90's.
Thank you
As you mentioned, that Bosch Throttle Body is very similar to my Mercedes. Believe Porsche also uses a similar one. The difference is found on the Bosch Part number.
Moving to the curve ball. I'm experiencing issues with the Throttle Body and had the same logic. Saw how to clean the flap and the electronic part.
Contacts on the potentiometer seem to have regular wear. However, I never saw how a known-good should look like. Definitely not gunked up. Just black dust.
The tabs on the flap gear were clean and intact, as well as having all the teeth. The teeth for the driving gear (between DC motor and Flap gear) are intact.
Cleaned the contact on the cover (dusty dry), even for the DC motor.
Can it be the DC motor or one of its components? (Didn't remove it because I don't have a spare one)
Can it just be the plug on the wiring loom?
Thank you sir for this video. It's really clear now what the problem of my S80 1999 is. It goes limp and then when I remove the battery cable, it runs again.
I AM really looking forward in driving my ’78 Caprice with no computers.
is it possible to replace the gear with metal material?
Excellent video, Very well explained. I have a 2008 Mazda 6 (Brisbane Australia) which has suffered a flat battery overnight. I believe caused by the Throttle body being energised even after car switched off overnight. I could hear the bzzing this morning when I checked under the bonnet. Confirmed when I disconnected the cable to the TB. My question is Can I easily replace the motor assembly of the TB, and how do I do it?, or do I just go an buy a whole new TB? Nick
Thanks allot! Most throttle bodies are not serviceable and will require a complete replacement. Stay safe with those wildfires.
Thank you that video helped me a lot I do have one question when I put mine back together I can hear that metal gear loose in there is it supposed to have a lock nut or something on it
How you opened the cover those clips don’t come out
??
Thank you, but we did not see how to open the black plastic cover of the electric throttle because the way to open and close it again is difficult
How would you replace the motor if that was the problem?
I just cleaned my throttle body and it was very dirty. would that cause a unimtended accelleration situaton?
Does the throttle always show codes? I have C30 2.0L and it has issues starting, it turns over, has spark, but it is not getting any fuel. The fuel pressure is good, the issues is that injectors are not getting any signal to engage. But sometimes it starts fine and will drive for hours without any issues. Do you have any suggestions? I am at a total lost
Thanks dude😍👍👍
Thanks for the information,you made it very simple ,from where did you source the new toothed plastic gear ?
I didn't. You will need to order a new throttle body. This video just shows how they fail.
Hi, I have the same set up on my jet rib it's 2cyl turbo, the throttle body work fine with engine off but as soon as engine is running it doesn't respond to the throttle or rev up.? It's a new throttle potentiometer, where does the signal go from the throttle before it gets to the throttle body? Is there another sensor that could affect it like air flow S or the ecu would control it?
I tried cleaning this on my 2011 fusion and the wrench light came on. Sputtering and crappy gas mileage . I'm sure now that I saw this video that it probably needs replacing. Another thing....do you have to recalibrate it when you put on a new one or clean it for that matter ?
Excellent video. I have an 05 Tundra, could this also cause a hesitation in throttle response from 2,000-3,000 RPM while accelerating?
Can also be the air sensor or a bad electrical connection.
Have an issue with mine in my 2007 Jeep Grand Cherokee Laredo 3.7L. I'm gonna replace the throttle body. I heard I'll have to do a relearn procedure. And I also heard I don't have to on the wk's. What do you think I should do?
How do you take off the black cap from the metal?