How to Replace Upstream Oxygen Sensor 2003-2008 Toyota Corolla
Вставка
- Опубліковано 7 вер 2024
- Buy Now!
New O2 Oxygen Sensor from 1AAuto.com 1aau.to/ib/1AEO...
This video shows you how to install new TRQ oxygen sensors on your 2003-2008 Toyota Corolla. The Oxygen (O2) sensors help monitor the emissions system in your vehicle. They measure the amount of oxygen passing through the exhaust, which informs the computer about proper fuel/air mixture, and the condition of the catalytic converter. Over time, the sensors may fail due to contamination, or reaching the end of their service life. TRQ offers new O2 sensors made to manufacturer’s specifications.
This process should be similar on the following vehicles:
2003 Toyota Corolla
2004 Toyota Corolla
2005 Toyota Corolla
2006 Toyota Corolla
2007 Toyota Corolla
2008 Toyota Corolla
Tools you will need:
• 12mm Socket 1aau.to/obmm/1A...
• O2 Sensor Socket
• 3/8 Inch Impact Gun
• Ratchet 1aau.to/obuM/1A...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
You finished with a different manifold/vehicle. The original threads stripped
Those exhaust shield bolts... Fighters.
So the job he has was replacing the exhaust manifold. Which is why he saved the sensor.
Is that Bank 1 sensor 1?
Good job. One question, what are the problems that occur to know that the oxygen sensor is damaged?
If these videos are made to help. Mention also that a new exhaust manifold was put in! What a rip!
Also, turn engine on and run for 10 mins or so. Probably did not needed the torch.
Muy buen video ,because had some problems that it could hapend to us ,,,sobre for my inglesa, ,,,,😂
So you put a whole exhaust manifold on it😅
There is such thing as WD-40
This oxygen sensor is bank 1 ?
What’s the socket size?
You should have used lubricant before you started any work. Use your brain, work smarter not harder. Customers are forced to pay more money when you break parts wthat are un necessarily damaged or broken. Heat shield could have easily been removed had you blasted it with lubricant first instead of breaking it.
+We Are Many Thanks for the tip! We'll pass this info along to our production team. 1aau.to/m/Shop-TRQ