Chemical handling should be taken seriously, following strict safety protocols to minimize risks and ensure a secure working environment. Contact me on : Instagram : instagram.com/pickyplans
I was lucky enough to run across a good quantity of these cumanstion boards.there is gold plating all over the board itself plus hand full of gold corner chips then bunch of ice chips.i have about 50 of these that I have been separating the components.im looking forward to seeing results from running them.just not sure if I should use nitric or should I use kiln and smelt it adding some lead as collector metal
@@PickyPlans I did. I cupel only with bismuth, small things, gold karat scrap, foils from fingers or from pins, works good, XRF said 99,8% purity. Not tried to do bismuth bath, bismuth is expensive. Kg like 40-50 USD...
Those lead bars added to the cupel are the same metals used in smelting e waste ash... In the crucible...I used lead as the collector metal to catch gold then i oxidized those lead and gold alloy to get the gold out.
I was xpecting bigger Gold piece after all this work of processing 15 Kg PCBs, I always so dissapointed after watching numerous videos like this - I must stop watch this stuff
Mining companies will start mines with values at 5 grams per. 2000lbs ore, extracted from the earth at high cost. 31.5 grams per 2000lb is rare. At 2.25 grams per 15kg, that's awesome
Chemical handling should be taken seriously, following strict safety protocols to minimize risks and ensure a secure working environment.
Contact me on :
Instagram : instagram.com/pickyplans
i think was you tecover 1kg gold
Dobra robota 👍👍👍 pozdrowiam serdecznie z Polski 🇵🇱👍👍👍
Thanks for watching 🙏
👍👍👍
Salam 1 hobi dari Samarinda kaltim
excellent video and good result bro 🌹🌹
Thanks brooo🙏🌹
It's not a good result.. Gold should be more.... It's less... Not sure you get benefit.... Gold must be 8 gram....
Saudação do brazil gracias ❤❤❤❤ dios o bendiga
gracias amigo
Videos 2.04 Dion nomulayt fire stop display😊
nice job, nice technique and tools you use. Is this a cast iron melting pot?
Thanks !
Yes it is.
Nice Picky!
Thank you my friend 🙏🌹
I was lucky enough to run across a good quantity of these cumanstion boards.there is gold plating all over the board itself plus hand full of gold corner chips then bunch of ice chips.i have about 50 of these that I have been separating the components.im looking forward to seeing results from running them.just not sure if I should use nitric or should I use kiln and smelt it adding some lead as collector metal
Smelting is a straight forward process, people prefer chemical processing, though.
Awesome process.
What is the grey stuff on the sides at 5:25
Colloidal gold dust released from solder
Is there a way for someone wanting to get into this without the crushing machine you have?
Good 👍
What/how was the Cement Cuppel made? I've only ever seen bone.
Just by forming some dry Portland cement using a round bowl.
Do you use water sulfuric and nitric as a CuCl2 solution to release foils?
Yes, after removing solder (Lead) i use this mix, it consumes less nitric acid to digest base metals. And it's way faster than CuCl2.
Hi boss, y 50 gms silver also added, and how u recovered silver after after completion of gold
After dissolving alloy in nitric acid and getting the gold percipitate silver using HCl and then convert to metal again using sugar and NaOH
how many currets
Good
J'aime bien 😊
Làm quá giỏi cảm chương trình
Why do you preburn the material? Why not put ICs into the crucible with lead and flux on top and melt it down?
Carbon is not easy to be fluxed, it's been incinerated to lower the reducing powder of carbon and litharge consumption as the result.
Nice result, way is kinda not my piece of cake, dont like lead, but whatever is good for you... Efficient it is for sure...
Thanks mate.
You can give the bismuth a try.
@@PickyPlans I did. I cupel only with bismuth, small things, gold karat scrap, foils from fingers or from pins, works good, XRF said 99,8% purity. Not tried to do bismuth bath, bismuth is expensive. Kg like 40-50 USD...
can you explain why did you use lead at the end?
Those lead bars added to the cupel are the same metals used in smelting e waste ash... In the crucible...I used lead as the collector metal to catch gold then i oxidized those lead and gold alloy to get the gold out.
May I know that's a liquid u but the boards inside it
ua-cam.com/video/w9JHhjQjaeQ/v-deo.htmlsi=iBoR-t_DKWx_HYqQ
Thật tuyệt vời cái hoá chất ban đầu bạn cho ăn thiếc là gì vậy bạn
Cảm ơn, đây là video sáng tác ua-cam.com/video/w9JHhjQjaeQ/v-deo.htmlsi=TLgtFUwkcuHGxG5f
Во как и музыка соответствует. Демилитаризация досок произошла.
Why was the end yield so low??
Telecom PCBs have low quality chips. As the main source of gold
Can I ask where you got your hammer mill ? And the price ?
I made it myself.
O que ele gastou de fogo e química esse ouro não paga fora o trabalhao
Are you sure theres no gold under the green layer.most of the time its copper
Yes, i check under the solder mask every time
Im from srilanka.can you teach for me about that.how to do this....
You can start with reading this topic
www.911metallurgist.com/blog/cupellation
Refining gold from telecommunication PCBs
I was xpecting bigger Gold piece after all this work of processing 15 Kg PCBs, I always so dissapointed after watching numerous videos like this - I must stop watch this stuff
❤
I think only 10 boards gold recovery not to be 15kgs
İndosnip display you disetion moneynok
Продать дороже выйдет
Not something to get rich from
Fairly decent for a large scale
Only 2,25 grams from 15 kgs comunication boards?Are you kidding??😭
Yes or only 2.25 gr from 30 boards !
Mining companies will start mines with values at 5 grams per. 2000lbs ore, extracted from the earth at high cost. 31.5 grams per 2000lb is rare.
At 2.25 grams per 15kg, that's awesome
نعم الألواح متفاوتة هناك الأضف والممتاز
That's pretty good
I habe one of these. That has more gold on it exposed them alth these conbined
You waste half of your gold.
Да ржу конечно. Автору пятуню
چطوری ایرانی😂 از ظرف گریس فهمیدم ایرانه
Bayad havasamo to enthekhab zoroof jam konam🤣
اون سیمانی که موقع تشویه کف کوره استفاده میکنی سیمان معمولی پرتلند یا سیمان نسوزه؟
@user-bi2xp9rx9i سیمان نسوز
Это анонизм тем более видно золото грязное перерастворять нужно, шмурдяк!
Weak process.