How to refine silver in easy 3 steps | refining silver 2 kg
Вставка
- Опубліковано 20 тра 2023
- Refining silver
How to refine silver
Refine process
Refining into pure silver
How to refine old jewelry into pure
Rakesh bullion
#Rakeshbullion
-------------------------
About this video-
In this video you’ll see the full process of refining old jewelry into 99.99 % pure.
-------------------------
Thank you for joining with us-
Subscribe for more metal refinery tasks and Jewellers. - Навчання та стиль
I'm glad that everyone wears his safety sandals.
😊😅😮😢🎉?
When you're sloppily pouring conc. nitric acid into buckets you gotta wear open-toed sandals without socks. That's in the safely manual isn't it?
That’s exactly what I was thinking 😅
i honestly dk how they can do that without much safety gear, I had like mask goggle and glove on and I still accidently got those damn acid on my pants and shoes, now they are discolored and some parts are ripped
Yes, welcome to India, we risk it all😅
Amazing best ❤❤❤
OSHA Approved!!!!!!!!
I always wear sandals when I smelt.
Nice process
Three easy steps... 😅 Not and easy job at all.. 😂 thanks for the video! 🧡
Nice refine
Kisi ko sikhna h to aap sikha doge bhaiya ji
Great video.
टंच की दवाई कैसे बनाते हैं व्हिडिओ भैया डाल दिजिये
Alot of the material could be cut up to create more surface area and to avoid the metals poping in the fire from trapped moisture.
Nice. 😮
Умнички!! Уважаю тех у кого есть реакторы Не травят народ окружающий
How much silver solution is needed to install copper locating plates?
Protect your hands by wearing gloves and protect your feet by wearing sandals. Great idea 😂😂
Nice
Hello sir
Mene tajab me ashudd chandi ka process Kiya
Mere pas 50 gram chandi thi se tejab me daal dia
Uske bad yah tejab me mix ho gai thi usme mene namak dala or chandi ka dahi jam gya fir me mene usi tejab me loha dal diya usse wo chandi ab nichhe nahi baith Rahi h sath hi liquid ka colour black ho gya please batye ki ab chandi kaise baithe jisse me use refine ka sku
Asid watar how many cant used.?
Imagine if this was in The US and Osha walked in!
Red coloured fingers.
wow! basic, rather dangerous, but effective.
Dove buttate l'acido usato??
Ever drop any molten on the little piggies?
I appreciate the video, but this doesn't seem like all possible impurities have been removed. I would think you would have to go through an electrolysis step to insure that to be the case.
where is the easy part?
❤❤❤
jo dusri metal hai vo kaise niklegi
there is still copper contained in the silver if you use it to cement it out
🤔 You said how to in 3 steps easy, you got me setting up at the kitchen stove with 2 crab pots and a spoon waiting 😂.
I want to purchase that melting furnace.can you explain that details of pipe sizes fitting or furnace price
Safer to buy an electric muffle furnace. While fascinating, please don’t look to this video for process design unless you don’t mind risking a limb or two
In the dissolving step, what is the container made of, and why does the hot nitric acid not dissolve the metal of the container?
Stainless steel is resistant to acid but if you look carefully, the inside is corroded.
Heat resistant glass designed for science is best but expensive.
You got more silver on the floor than out the door
Hai can you please tell were can I buy the refinery drum?
Please let me know
you spilled almost as much as you refined. love the smell of nitric acid i the morning too.
I wonder what will happen when the handle of the little nitric acid plastic bucket snaps...
my bet is they can ask the last guy it happened too
"... in 3 easy steps."
18 steps later...
Bhau kutun ahat tume ahmi Andhra madhi rahtu #dukandarr
Salt is the fastest way to collect the silver in the solution not copper plate.
what kind of salt
@@ertugcetin9371 common salt in our kitchen.
That requires more steps and fully converting the AgCl on such a large scale would require a blender with a non-reactive whisk at least. I've done it both ways and I'd never consider using salt on this scale although it's possible to do. It's easier to wait a few hours.
@@dustybrown4599 you don't need to wait an hour only minutes if you use salt against copper.
@@dustybrown4599 you don't need to wait an hour only minutes if you use salt against copper.
ماشاء الله
2kg silver me itna distlled water?
Will it dissolves in nitric acid again
Yes. It will form silver nitrate.
i need a nice job
Using acid and pouring molten metal while wearing sandals is a recipe for disaster.
Yes, welcome to India 😅 we are risk takers 😅
Well they didn't remove all the copper nitrate, nothing they used was clean so 98-99% pure.
It's obvious that this was recorded on casual Friday.
I find it a bit of a waste when some silver which may contain stones or other potentially sellable materials are just melted in the same pot. I dont know why just niggles at me a bit
You just added copper back into the silver, it’s less pure then when you started… 😂
भाई जी इस का तांबा कैसे निकाल लेंगे किरपा करके आप ये विडीयो बनाए धन्यवाद
Ok
Antimoltenmetalflipflops...
The case could be made that isn’t 999 pure.
Make it then.
Very profitable process 1100gm jewellery turns 1930 gm pure silver. 😂😂 0:19
😅
Yeah blue colour Mai koun sa chemical hai bhai..
Copper nitrate
I would NOT want to be the guy wearing sandals pouring hot nitric acid should a spill occur. 😢
Sure, safety precaution is very important.
I hope you’re not dumping your old stuff out anywhere you want to. Sure looks like a hard way to do an easy job but I guess you just don’t have the proper equipment.
I am sure that even with the limited equipment had, the process can be designed to be better and more efficient.
Please don't let sreetips see this
I prayed to sreetips and he said this was an abomination lol 😂
They dump the waste into the Ganges river
Worst refining in history
Ох и химичат не по детски. 😂😂😂
Yikes 😮
Don't try at home it's risky
Too much work
Bare feet……….
What a mess
Very poor safety habits. Very poor refining techniques.
Notun kono podhhoti apnar jana ache?
A lot of poor people having to do this!
Hello sir
Mene tajab me ashudd chandi ka process Kiya
Mere pas 50 gram chandi thi se tejab me daal dia
Uske bad yah tejab me mix ho gai thi usme mene namak dala or chandi ka dahi jam gya fir me mene usi tejab me loha dal diya usse wo chandi ab nichhe nahi baith Rahi h sath hi liquid ka colour black ho gya please batye ki ab chandi kaise baithe jisse me use refine ka sku
The english translation for this by google translate hilarious and completely absurd 😅
Your mixture contains predominantly the following constituents:
1. Sodium nitrate
2. Ferric chloride (lohe ka chloride)
3. Silver (chaandi)
4. Water
And free ions.
To recover the silver, electrolysis is best, but unlikely to be feasible from what I am assuming about your resources. The following may work, assuming the displacement reactions have occurred as above.
1. Filter the mixture you have. The powder/solids you have on the filter now contains a mixture or ferric chloride and silver.
2. Put the (solid) filtrate of the mixture in a glass beaker or acid proof vessel, and add conc. nitric acid. Ferric nitrate is water soluble, while silver chloride is not. When white precipitate comes out of solution, filter to recover silver chloride.
3. Reduction of silver from chloride can be undertaken by using a variety of methods in literature (google). You can use hydrogen peroxide (conc.) which will produce hydrochloric acid/hydrogen chloride and oxygen, so please keep safety in mind. Alkaline solution may be used in situ