DIY 2013 2014 2015 2016 2017 Honda Accord Replacing Belt Tensioner
Вставка
- Опубліковано 29 лип 2023
- Watch how to replace belt tensioner on a 2013 2014 2015 2016 2017 Honda Accord. #honda #hondaaccord
2013 - 2107 Honda Accord Replacing Serpentine Belt: • DIY 2013 2014 2015 201...
Part & Tool Used:
Belt Tensioner - amzn.to/43JhLrn
8mm Hex Socket - amzn.to/3WPNfwb
3/8 Socket Wrench - amzn.to/4bONMTn
17mm Wrench - amzn.to/3QS32qy
12mm Wrench - amzn.to/44M3pbP - Авто та транспорт
Nice video
Thank you!
I’m having trouble finding the 12 millimeter bolt. Can you tell me the actual name of it?
🔥🔥🔥
🚨
Thanks
Welcome
Hello do you have a video of the front sway bar bushings? You need to lower the sub frame right?
I don’t have a video for that. Will look into it.
Побольше про эту машину снимай😎
Thank you for watching our video. I have more videos on this car on my channel. Check it out.
@@MobileCarMechanicвидео про замену трансмиссионного масла и фильтра очень полезная👍👍👍
Could you do a Brake bleeding on Honda accord video in the future?
Yep, will work on it. Thank you for your support.
Is this part still holding up or have you had to replace it? Still the same one linked in the description? Thank you
It's still holding up and its the same one in the description. We had ordered a different brand previously from rockauto.
You should do a video on replacing Honda struts.
Thank you for the suggestion. We will look into it and try to have a video soon on struts. Cheers!
@@MobileCarMechanic
Should you go w/ OEM tensioner or would a aftermarket like Dayco be ok?
We went with an aftermarket Chinese version and it failed after a year or so. We replaced with another after market on the video. OEM will usually be the best but not the cheapest. Day I would be better than the knock offs on Amazon.
Nice vid! I made a longer version of this along with the serpentine belt replacement on my channel.
Idk if that was an aftermarket tensioner pulley, but just want to share that I got an aftermarket and it gave out after about a year so I ended up going with OEM again.
Thanks for the info. We installed a tensioner as well as new alternator due to noises in the bearings.
The dealership suggested I change all drive belts on my Honda 2013 accord. Where can I go for a cheaper price . The dealership charges to much
You can always goto an independent mechanic, they are usually way cheaper than a dealer.
Is the T-50 bolt revers thread?
It’s not reverse, it’s your typical lefty loosey!
Great video! When should I replace the belt tensioner?
It’s not really a item you replace often. But we initially replaced it because both the alternator and the tensioner pulley bearings were bad making a loud sound. If you hear any noise, the belt has too much slack, or in our case the fluid leaking then replace.
When it starts making a supercharger sounds. I have a video of the noise on my channel
I have a rough idle 2013 v6 what maintenance can i do to get my engine smooth...i have 171k mile
Get your valves adjusted. Clean your throttle body. Clean your injectors. Make sure your have good spark plugs@@definitionXrp
Put some mehkos on the bearings so they aren’t stiff.