Logan Graham its mainly for driving comfort. Driving my hmmwv with the 2 piece beadlock wheels and run flats still in, I can understand the replacement of the wheels. Once your up to about 40 mph, the whole truck shakes and it doesn't smooth out until you're above 50. Those wheels don't balance out well. If you use the hmmwv as a daily driver, you'll find that the wheels need to be changed. If you mainly use it for off road, the original wheels are great.
Y'all did a great build. For the haters who are bitching about what you didn't do ,well it's a customers build who apparently had a budget. And it seems that customer wanted the basics done so that the vehicle will last until he decides to put a bigger better motor in it but so it can still be used till then. So great job guys. Hope to see more videos. And for those saying the motor isn't powerful enough yes you are right but it's not about the power it comes down to gearing and the portal hubs turns the power to 2:1 so 200ftlb of torque is turned into 400 at the wheel and a simple transfer case gear reduction would make it so much better without a new motor. So for a baller on a budget it's a badass build that I'd love to own. The only thing I'd like to change without killing the budget is the radiator cause when that fan on that one kicks on it sounds like a jet engine inside so I guess some sound deading inside would help as well. But for just off-road use it wouldn't matter. Geat video
john martin your arguments invalid, $35-40,000 put into this?! Are you kidding me, it’s a major rip off and waste of resources, it doesn’t even have hard doors or a top, they cut corners
I love what you did to this thing! It's Bad Ass. It would be a daily driver for me, the rich dude you built it for will most likely park it in a garage and it'll never see dirt or sunshine ever again, just something to brag about.
Very nice. I would love to have one of these as a company vehicle/overland vehicle with a roof top tent on top. How much roughly for one similar to this build?
Beautiful except the wheels . Should of left stock ones. They are worth more than China made fuel rims. Stronger and original . Try and replace the original and you will see what I am saying . They cost 4 times what those cheesey fuel rims cost.
Mike Carr you should really follow our Instagram or facebook. We have over 25 humvees in stock not to mention every oe humvee part you can think of we also mount those 2 piece humvee wheels in house, wait till you see the next video at the end of the month.
Dude, there's a gap on the floor at 6:37. Should have sealed it to prevent water or mud from seeping in when going mudding or river crossing. Btw, the project is a beast. Cheers!
Is that a full fording kit? Or just a snorkel? Are all of the electronics inside waterproofed or water resistant? For example The vents on the side of the amp don't look right. Just curious thank you
Millenial rich kid clubbin' transport, beach sand squasher, middle age doctor/exec. grin maker. Ever see mud? I would give it a long long look in any parking lot anyway 'cuz it has spirit. There is stuff to criticize but I'm sure it's still massively capable. They just are. Appearance is terrific!!! Name a 4x4 you didn't change and upgrade when you could. Mea culpa!
If I had the money I would do carbon fiber and black brushed anodized aluminum interior.. and a full glass display with a Tesla like control panel with 360 degree view.. Gps..etc.
i love america i will support my country wich is here USA but i was born in Armenia lived here for 30 40 years now i do concider this is my nation in a way why cause we bread this air land and food we at and all amazing stuff we see
Hey Bullet- Can you hook me up with a link to the stereo set up you have in that rig or the vid that covers it? I'd love to do something like that in my h1 and get rid of the piece of shit radio. Thanx
I'm thinking about buying a humvee for my daily driver. Currently daily a 2017 mustang gt. Just wondering if the humvee would hold up to the salt of a new Hampshire winter
@@BulletmotorsportsInc Thanks for the reply. But my question was if I want to get one, how much will it cost me. I wnet on your site I see you sell HumVees...
My 1986 HMMWV is noisy and loud inside, did you add any additional sound proofing material in this build? Air Intake Snorkel but no fording exhaust pipe. Which make model of that light bar did you use there.
Love how the first time he mentions the new bolts, and points to them, the first thing I see is an old slotted head screw on the headlight casing. Classic. So... they're not all new bolts then?
BulletmotorsportsInc Do you have the paint code for the exterior please? Im building a Memorial Jeep Wrangler for my brother who was killed in Military Combat and id like to get the color correct and also use a satin or gloss finish. He was planning to build a Jeep as he loved them but since he never got the chance im doing it in his honor and memory. Thanks so much for any help.
That would depend on the condition and how much repair knowledge you have. The more you can fix yourself without replacing or paying someone else to do makes a difference. You may get one that has a bad engine, transfer case, portal axles, transmission, or anything and that will affect the price. Say you got a low mileage one and everything was in working order then you could spend ten grand on top of what you purchased it for and have a nice vehicle.
The only time when a HMMWV is worth anything is when you rebuild the whole truck, I'm actually impressed and liking this build a lot. When having to deal with these four wheeled driving shit boxes on a daily basis, it's nice to see one that I'd actually wouldn't mind owning. Although, me personally I'd swap out the shitty, fuel guzzling engine for a 5.9 Cummins and a six speed manual. And to those saying these rims are Mall Crawler rims, you obviously never been to a SEMA truck meet haha.
Juan F no they are not. Military Humvees with the 6.5's rarely have a turbo. Ya don't get the ones with turbos till the later years which they pretty much don't sell right off the line from the military. I've seen a couple out there with the turbos sold at the auctions but they're very far and few in between. If you want one with a Turbo you've either got to do a complete engine swap or do the modifications to the engine required to be able to install a turbo and do the install of the actual turbo. Also a lot of the humvees come with a 6.2 not a 6.5. I've tore down and redone a lot of humvees just like these guys are doing. I worked with my Uncle and he was contracted out to do humvees for Plan B Supply so I've disassembled redone and reassembled many many humvees and not a single one had a turbo unless an engine swap was done. In my opinion if someone is gonna do an engine swap they might as well do it right and put in a Cummins with an Allison transmission. We stopped doing humvees for them due to a few reasons which I won't get into. Anyway just to clear things up it's quite rare to get one with a Turbo already in it.
I would have thought the 1989 would be a 6.2 NA not a 6.5 NA or 6.5 TD but you said you kept the original 6.5? I don't think the 6.5 was even released in NA form until the 90s? I assume this is really a 6.2 NA with the older 3L80 trans?
@@bartbarnett2811 ... Solenoids are subject to EMP interference... Also, you've clearly never had to hold your hand over the exhaust to create back pressure on a cold day with one of these animals. They are pretty temperamental.
So did you replace any bolts?
Jonathon Parker thanks! I needed that laugh today!
:)))
I was wondering the same thing
Not sure if they change the hardware
What about hardware?
If only it had new hardware...
Zachary Garn I see what you did there
BulletmotorsportsInc vc ggvvgvvgvgvgggvvvv"vvvgvgg
Very nice but not a fan of the mall-crawler wheels
My thoughts as well.
Mekhanic1 honestly the standard stock rims look really good to me
Logan Graham its mainly for driving comfort. Driving my hmmwv with the 2 piece beadlock wheels and run flats still in, I can understand the replacement of the wheels. Once your up to about 40 mph, the whole truck shakes and it doesn't smooth out until you're above 50. Those wheels don't balance out well. If you use the hmmwv as a daily driver, you'll find that the wheels need to be changed. If you mainly use it for off road, the original wheels are great.
They aren't too bad,there could be worse on it but standard would be better.
WOW! Im not a big humvee fan but i gotta say u guys knocked it outta the park on this one!! Great attn. to detail!
I lived on a Humvee for many years. That Humvee looks great.
Is that all new hardware?
Levi H. Yes.
I think I was a feel old bolts hahahahaha
Nice Humvee, I worked on it at the Motorpools in Schweinfurt.
Y'all did a great build. For the haters who are bitching about what you didn't do ,well it's a customers build who apparently had a budget. And it seems that customer wanted the basics done so that the vehicle will last until he decides to put a bigger better motor in it but so it can still be used till then. So great job guys. Hope to see more videos. And for those saying the motor isn't powerful enough yes you are right but it's not about the power it comes down to gearing and the portal hubs turns the power to 2:1 so 200ftlb of torque is turned into 400 at the wheel and a simple transfer case gear reduction would make it so much better without a new motor. So for a baller on a budget it's a badass build that I'd love to own. The only thing I'd like to change without killing the budget is the radiator cause when that fan on that one kicks on it sounds like a jet engine inside so I guess some sound deading inside would help as well. But for just off-road use it wouldn't matter. Geat video
john martin your arguments invalid, $35-40,000 put into this?! Are you kidding me, it’s a major rip off and waste of resources, it doesn’t even have hard doors or a top, they cut corners
Great job for an old veteran
I love what you did to this thing! It's Bad Ass. It would be a daily driver for me, the rich dude you built it for will most likely park it in a garage and it'll never see dirt or sunshine ever again, just something to brag about.
Very nice. I would love to have one of these as a company vehicle/overland vehicle with a roof top tent on top. How much roughly for one similar to this build?
Hi mixflip the truck guy
GOOD JOB GUYS, DONT WORRY ABOUT THE NEGATIVE COMMENTS. KEEP BUILDING WHAT YOUR CUSTOMERS ASK FOR..👍👍😎
Oh.. God..why am I not working with you ! The black and sandblasting combination is just great ! Seat cover design is simple and easy !
On the Spot Cash Award for working on US Army Trucks
Did you guys replace any of the bolts?
Looks like a damn beast
Καγκουρας με τα όλα του! Ηχεια,τιμόνι και το καλύτερο από όλα ζάντες!!
But did they replace the hardware? What about the bolts?
6:34 why would you put a inverter there if he wanted a set up to go through water?
Beautiful except the wheels . Should of left stock ones. They are worth more than China made fuel rims. Stronger and original . Try and replace the original and you will see what I am saying . They cost 4 times what those cheesey fuel rims cost.
Mike Carr you should really follow our Instagram or facebook. We have over 25 humvees in stock not to mention every oe humvee part you can think of we also mount those 2 piece humvee wheels in house, wait till you see the next video at the end of the month.
I think they did what the customer wanted. But yeah I agree.
Dude, there's a gap on the floor at 6:37. Should have sealed it to prevent water or mud from seeping in when going mudding or river crossing. Btw, the project is a beast. Cheers!
All that work and No 4th gear?
Had any problems with the stainless and the aluminum, stainless tends to break when paired with aluminum
Haven't had any issues with it yet.
fantastic build. Great Work!
Super Clean
What type of batteries you used? I need 2 new ones and unsure if I should go with what it came with.
The wheels are awesome
Is that a full fording kit? Or just a snorkel? Are all of the electronics inside waterproofed or water resistant? For example The vents on the side of the amp don't look right.
Just curious thank you
If you increase the snorkel hight you can make it a submarinw
when under water itll hold onto oxygen , but not long so i recomend a closed circut oxygen system
A fine Murican I can hold my breath for a long time until I need a cigarette. So I'm good.
Franks ... youre my fucking hero
Never trust a guy that wears a cowboy hat, shorts and sneakers.
Floridians man
Didn't we elect 1?
First video that left me speechless
Millenial rich kid clubbin' transport, beach sand squasher, middle age doctor/exec. grin maker. Ever see mud? I would give it a long long look in any parking lot anyway 'cuz it has spirit. There is stuff to criticize but I'm sure it's still massively capable. They just are. Appearance is terrific!!! Name a 4x4 you didn't change and upgrade when you could. Mea culpa!
Where is the actual stereo deck at?
Bolts can either be stainless or grade 8, but not both...
Momma said torx bolts are the devil.
ur momma is a smart lady
Mom has no imagination of torque.
Never thought I'd see a hum motherfucking vee on mall crawler wheels
If I had the money I would do carbon fiber and black brushed anodized aluminum interior.. and a full glass display with a Tesla like control panel with 360 degree view.. Gps..etc.
i love america i will support my country wich is here USA but i was born in Armenia lived here for 30 40 years now i do concider this is my nation in a way why cause we bread this air land and food we at and all amazing stuff we see
Super clean
Well done ! I want one ! 😆
Nothing out better, beefier, or more practical than the stock wheels. But the got swapped out for cast aluminum China junk?
Nicely done and way to do it right!
Hey- Can you talk more about that stereo set up? Is it some sort of bluetooth speaker bar playing directly from the phone. I'd love to do with my H1.
We have another video coming out end of next week with a similar setup, I will go into more detail then.
Cool. Look forward to it.
Hey Bullet- Can you hook me up with a link to the stereo set up you have in that rig or the vid that covers it? I'd love to do something like that in my h1 and get rid of the piece of shit radio. Thanx
Very simple, very cool! Love it....
Nice build good video
A car salesman with a Cayboyhat. Big hat -no cattle
Is that invertor waterproof?
How do you get one with a title? I’ve looked at buying several times, but they all seem to stipulate that they are off road only.
A Cadillac valve, that's a new one.
What did all of this cost including vehicle, new hardware and labor?
I didnt think there is Grade 8 Stainless? You sure they are not normal Grade 8?
How does the lineX effect sound levels?
I'm thinking about buying a humvee for my daily driver. Currently daily a 2017 mustang gt. Just wondering if the humvee would hold up to the salt of a new Hampshire winter
I want to get a military HMMWV to, if only I could afford one lol
God I love that I was born in America. Awesome ride!
Very nice.
Any new bolts? What about the old bolts?
You guys mentioned 35-40k in parts only, how much did it cost in total? Would've guessed with the work that went into it at least 80k?
What is the total cost of it as it sits with all the work and mods done?
Hi there!! Can you please tell me how much can cost me that HUMVEE if I want to have the same?
Arnold COOMEE she is sold
@@BulletmotorsportsInc Thanks for the reply. But my question was if I want to get one, how much will it cost me. I wnet on your site I see you sell HumVees...
Arnold COOMEE call our office
@@BulletmotorsportsInc Thanks I will do so
Great video! Good job!
My 1986 HMMWV is noisy and loud inside, did you add any additional sound proofing material in this build? Air Intake Snorkel but no fording exhaust pipe. Which make model of that light bar did you use there.
Just curious what was the bottom line on that build?
Love how the first time he mentions the new bolts, and points to them, the first thing I see is an old slotted head screw on the headlight casing. Classic. So... they're not all new bolts then?
Matt Sampson those bolts were new and actually hand polished. Thanks
Wonder if those are the original bolts...
Nice rig. But I'd stick with some beadlock rims
What’s the price on this
BulletmotorsportsInc Do you have the paint code for the exterior please?
Im building a Memorial Jeep Wrangler for my brother who was killed in Military Combat and id like to get the color correct and also use a satin or gloss finish. He was planning to build a Jeep as he loved them but since he never got the chance im doing it in his honor and memory. Thanks so much for any help.
Amazing build.... 👍
Oh my....It`s devil on the wheels!!!!
Did you properly PMCS that vic
How much?
How much for this build? Looking to import to Canada.
Did you ever get to import one to Canada? I'm looking to do that as well.
I wouldn't call anything with a 6.5L "The Beastt"
Or buy something from the guy that calls a 6.2 a 6.5
Ha I agree. I have a 6.2 & you couldn’t spin the tires in vaseline!
hey nice job. and the video editing and drone work, perfect!
Thanks William!
I don't get the reason behind putting a Japanese brand tires on a American Icon!
Juan F shoulda put some Mickey Thompson baja claws on it
Toyo is an American company genius, made in the USA.
Nice, truck good thing he told us they replaced all the hardware......14 times!!!!
How much would it cost to refurbish a military humvee from gov planet?
That would depend on the condition and how much repair knowledge you have.
The more you can fix yourself without replacing or paying someone else to do makes a difference.
You may get one that has a bad engine, transfer case, portal axles, transmission, or anything and that will affect the price.
Say you got a low mileage one and everything was in working order then you could spend ten grand on top of what you purchased it for and have a nice vehicle.
is this street legal for all states?
What's the approximate budget for this level of build?
The only time when a HMMWV is worth anything is when you rebuild the whole truck, I'm actually impressed and liking this build a lot. When having to deal with these four wheeled driving shit boxes on a daily basis, it's nice to see one that I'd actually wouldn't mind owning. Although, me personally I'd swap out the shitty, fuel guzzling engine for a 5.9 Cummins and a six speed manual.
And to those saying these rims are Mall Crawler rims, you obviously never been to a SEMA truck meet haha.
Looks good
how much will this cost? all in all
good video
I think this truck has all new hardware....
I cant believe yall keep the stock motor without the turbo those engines make no power at all
Ryan Miller it did not fit the build budget. But I’m sure Cody is going to send it back for more juice in the future.
Miller DaCocaineDealer all 6.5s are turbo
Juan F no they are not. Military Humvees with the 6.5's rarely have a turbo. Ya don't get the ones with turbos till the later years which they pretty much don't sell right off the line from the military. I've seen a couple out there with the turbos sold at the auctions but they're very far and few in between. If you want one with a Turbo you've either got to do a complete engine swap or do the modifications to the engine required to be able to install a turbo and do the install of the actual turbo. Also a lot of the humvees come with a 6.2 not a 6.5.
I've tore down and redone a lot of humvees just like these guys are doing. I worked with my Uncle and he was contracted out to do humvees for Plan B Supply so I've disassembled redone and reassembled many many humvees and not a single one had a turbo unless an engine swap was done. In my opinion if someone is gonna do an engine swap they might as well do it right and put in a Cummins with an Allison transmission. We stopped doing humvees for them due to a few reasons which I won't get into. Anyway just to clear things up it's quite rare to get one with a Turbo already in it.
Tyson Capel Yea the only ones that come with turbos are the up armored ones all the soft tops are n.a. I know because I'm a mechanic for the army lol
The Gale Banks turbo works well for These.
How much
Who play that music in this video???
Yea but did you replace any of the old hardware?
WOW my Bro beatyfull truck blessing from El salvador c.a
From
Excelente modificación
Good what is the price?
So they took it apart didn't improve anything then made it look ghetto fabulous
But did you replace any of the hardware. Is it new??? Any new nuts or bolts ????? 🤔🤔🤔
This is awesome!
I wish Jeep would utilize four corner a-arm suspension.
.35 to 4000 in new hardware fasteners?
yup
Can I have nuts instead of bolts? I heard bolts are unreliable which is why they always need replacing
is their any new hardware on this rig
I would have thought the 1989 would be a 6.2 NA not a 6.5 NA or 6.5 TD but you said you kept the original 6.5? I don't think the 6.5 was even released in NA form until the 90s? I assume this is really a 6.2 NA with the older 3L80 trans?
What a waste y’all should have spent the money on a engine swap. That 6.5 is junk.
Ya maybe a Cummins
Yeah but it's reliable junk all you needs power to the mechanical injection pump to open the solenoid and you're good to go emp proof
@@bartbarnett2811 ... Solenoids are subject to EMP interference...
Also, you've clearly never had to hold your hand over the exhaust to create back pressure on a cold day with one of these animals. They are pretty temperamental.
Yes it is! Cummins
crjengr 6.2, they didn’t put duramaxes until 2000s, this HMV was from 89