For anyone who may not know. When the two GN drives are lined up it allows the Qan(T) to use Quantum Burst. In the movie this was used to communicate with the aliens via quantum brainwaves. I don't know if provides an offensive or defense boost, just that it gives everyone in the vicinity a shared consciousness.
It also allows it to teleport an unknown, but incredibly long, distance when paired with the GN bits, and the gate they can make. All the way to the ELS homeworld.
The whole communating with aliens thing is not for offense nor defense since the suits primary goal is for greater understanding between sentient beings I say this while the suit has a buster rifle, which is ironic
well. iirc it was more like that the Drives of the Quant where especialy designed to be used in Twin Drive(unlike 00 and his drives(0 Gundam and Exias) who just barely managed to go over the safety part of the Twin Drive activation)so they where more powerfull out of the box , and the direct Connection of the Two drives amplified the GN Particel Production even further which lead to such an amount of Particels Being Released that he just... kinda achived Lightspeed....
as i build this, its kinda like nu gundam. with the funnel/bits hanging to the left. its the titular characters final ms. wonder if 00 quanta looks nice in nu gundam colours...
I'm glad you noticed that the arms aren't suppose to be symmetrical but there's a white part from the D Runner that goes on the back of the left arm so I hope you didn't already lose that part.
ZakuAurelius yeah on one page they show the armor assembly of the right arm and then on the next page they show the armor assembly of the left arm and since they give you doubles of both those runners I can totally see how it would be easy to get confused about that.
Router25 they are actually selling the an extra sword that goes on the right shoulder. you can exchange the sword with a spare shield, but that would obviously cost more than youv want it to.
I have all Setsuna's MS: NG 1/100 Exia Trans AM mode, PG 00 Raiser all painted and water slide decals. Also the MG Quan[T] to do. For the other Gundam Meisters I have all in NG 1/100 Seravee, Arios and Cherudim in Designer's colors. Of course I have all water slides decals already for the kits (stickers are awful) I have to do but for now I'm focusing on my Zeta and ZZ kits. Done painted and water slided: MG Zeta (my second Gunpla and the first kit I painted with Tamiya Bombs before I got my airbrush) and MG Hyaku Shiki 1.0. Building now: MG RX178 Mark II 2.0, got rid of some seam lines, primer them and also the white pieces. To do: MG ZZ Full Armor and Qubeley MKII. I just need the water slides for those two. On a side note I hate modifying my kits except for some detailing. When I buy a Gunpla it's just like when I'm buying a figure, I want it to stick as closely to the original. I just paint, panel line, a bit of weathering but not too much, water slide, top coat them to give them a realistic look.
Good review. Have you seen the pictures of the HG 00 Qan[t] Kai from the GBFT special that'll be coming out? Any thoughts about how it'll compare to the original Quanta, since Shia replaced the GN Sword V and the sword bits? I always thought the GN Sword V's Buster Sword looks a little goofy, being so long and flat. The other kits of interest to me are the Scramble, also from the GBFT special, and the new Barbatos Lupis, which I think will be to season 2 what the first Barbatos kit was to season 1. Mid-season upgrades, right? No new Grimgerde yet, however the new enemy mobile suit has a more unique design for the Gundam franchise. And as usual, no extra posing hands yet.
I like the Astraea design! So I have the HG of the standard and F-type. But not interested so much in the RG. The more details and part separation is cool, but HGs have more weapons and better proportions in my opinion.
The BTF Full saber is for the MG. Not unless they made a new one for the RG. Edit: found this: www.gundamkitscollection.com/2016/06/rg-1144-00-quanta-full-saber-add-on-3rd.html
My Qant head also kinda loose and very easy to pop off maybe because it hole is little bit bigger for the ball joint to fit in . Is there any solution for that ??
As a huge UC fanboy, who hasn't been very impressed with most of the other series ( Even wing which got me into gundam originally). I thought OO was fantastic, it felt like a complete story almost of UC level. unfortunately awakening of the trailblazer left me a bit confused, and the lack of on screen time for the Qan T was a letdown.
I don't think the 00 Qan (T) was meant to actually fight. It was made strictly to utilize the Twin Drive System to communicate with other life forms using Quantum Brainwaves. That said, I also was letdown by the Qan (T)'s screen time.
High Grade: 1/144 scale, within the $10-30 range, simple, smol, snap together build Master Grade: 1/100 scale, within the $30-70 range, somewhat more complicated and usually with mechanical gimmicks, somewhat larger, snap together build Real Grade: 1/144 scale, pretty much a Master Grade but with High Grade size and price, snap together build Perfect Grade: 1/60 scale, usually hundreds of dollars, stupidly but amazingly complicated, detailed and gimmicky, stupidly huge, requires painting and specialized tools to assemble RE/100: 1/100 scale, MG price range, but not as complicated as Master Grades, MG size, most Mobile Suits in this line are somewhat unknown and sometimes huge in-universe, snap together build
The head on mine is a problem. Never really secure, always comes off when I'm rotating it unless I actively press down on it. Looks similar to the issue that RG Sinanju has.
Don't worry about -haters- people worrying about the completeness of the review. Aside those grips on the GN bits, is there another loose parts? Thanks for another great review.
you forgot the gm..gn?........the green circle. the green circle on its backpack can come out and it looks kind of cool. you could as a joke have the 00Q hold it like a soda can lol
It stands for "out of box" which I mean as this is exactly what you'll get out of the box with nothing extra done to it. But others use "out of box" to mean that it's painted in the colors it's meant to be.
heh so my shield on my quanta became loose (the blue peg that connects the shield to the backpack on that grey thing) after trying to swivel it around to get it to look good on the back does anyone know how to fix it :3
two layers of flat coat should also do the trick in a safer way since they increase friction instead of just making it thicker. go for four layers if two arent enough
HAHA! love the intro! not that my trash opinion means anything.... but the series was good.... save your time and brain cells and skip the movie.... it's great animation, story is Eva levels of confusions and shark jumping... again, IMTO. keep up the good work and mute the haters.
What i do like from 00 series is their head design, i watch other gundam series, so far for me the head 00 series is far more beautifull from all gundam franchies.
i think you really need to watch the 00 series if u havent... in my personal opinion the 00 series has the best story since wing series came up.. sorry for being 00 fan... but ur review is almost being reverse-bias.. oh well i still like u as a reviewer.
i see.. it juz pains me that he didnt like qan t... coz imma buy my next MG this week which is qan t... been wanting it for a long time but instead i bought freedom 2.0 and barbatos last week
i stopped collecting RG already coz the bigger MG seems a lot better in shelves.. having 10 MGs with RG beside doesnt sink to me.. ill juz wouldnt do the combined sword thingy coz of the weight issues.. and it looks bad to me IMO.
+MrFlunkorg i have the MG 00 7 Swords and he has very weak joints. almost every joint uses polycaps. He looks great on a shelf, but he is a chore to pose
The proportion just turn me off, just like you mentioned in the review....I feel the same about it. I have the MG and I don't think I want to pick this up and the new soft plastic is terrible.........ABS plastic is so much more sturdier. That's one reason I'm avoiding buying newer kits.......
If you want to get to know the suit better... dont. Its from the 00 movie and thats one of the worst things to come out of gundam. I'd rather watch G-Savior.
In my opinion, you should get this kit. Based on all the reviews I watched, this RG is really, really good. Posing, articulation, details, stiffness - everything is good! Of course, you can find minor problems here and there, but nothing enough to skip this kit. Hope I have helped you :)
I haven't built the HG, so I don't know how good it is. But I'm sure this is at least As good, but probably better in a lot of ways. Definitely worth the $25-30 if you're a fan of this Gundam.
+ZakuAurelius Thanks man. I usually skip RG kits if I already have an HG version of it. Since I don't have an HG Sinanju, I'm considering getting the RG version.
![1/144 RG 00 QAN[T] (Mobile Suit Gundam 00) | REVIEW](http://i.ytimg.com/vi/W5MboHnb8wk/mqdefault.jpg)
![1/144 RG 00 QAN[T] (Mobile Suit Gundam 00) | REVIEW](/img/tr.png)
![MG Gundam 00 Quan[T] Full Saber Review - GUNDAM 00 -](http://i.ytimg.com/vi/tSpgTFxxfow/mqdefault.jpg)
![Ranking every single retail RG Gunpla - RG 01-41 tier list - [4K]](http://i.ytimg.com/vi/IkAQ86t9Qjk/mqdefault.jpg)
![Custom Build Gunpla- RG 00 Qan[T] + Full Saber](/img/n.gif)
"Its a backpack, but on the side. SIDEPACK"
=))
how about if there're six of them?
For anyone who may not know. When the two GN drives are lined up it allows the Qan(T) to use Quantum Burst. In the movie this was used to communicate with the aliens via quantum brainwaves. I don't know if provides an offensive or defense boost, just that it gives everyone in the vicinity a shared consciousness.
Gilbert Berger now I want to try it with 3 drives more than ever. Time for some SCIENCE!
3 GN Drives would probably let you say hi to Cthulu, lol
It also allows it to teleport an unknown, but incredibly long, distance when paired with the GN bits, and the gate they can make. All the way to the ELS homeworld.
The whole communating with aliens thing is not for offense nor defense since the suits primary goal is for greater understanding between sentient beings
I say this while the suit has a buster rifle, which is ironic
The shield does have a second GN drive and combining them let's you teleport to Jupiter or something.
lol hahaha
+ZakuAurelius it's true. 😂
Not just Jupiter, I think it's a wormhole or something like that to transport anywhere in space much quicker than conventional methods.
well. iirc it was more like that the Drives of the Quant where especialy designed to be used in Twin Drive(unlike 00 and his drives(0 Gundam and Exias) who just barely managed to go over the safety part of the Twin Drive activation)so they where more powerfull out of the box , and the direct Connection of the Two drives amplified the GN Particel Production even further which lead to such an amount of Particels Being Released that he just... kinda achived Lightspeed....
What happens when you have 3 drives? Think of the potential cross-over specials!
as i build this, its kinda like nu gundam. with the funnel/bits hanging to the left. its the titular characters final ms. wonder if 00 quanta looks nice in nu gundam colours...
do you recommend buying the nu gundam, this gundam, or the moon gundam? I'm deciding what to buy but I'm not sure... Can somebody help me decide?? plz
@@projectno.7 in terms of model quality the RG Nu is the best
@@projectno.7 rg nu is the best but most expensive, moon and this is pretty same priced, but moon comes with an action base for more pose options
Great review, awesome model. It actually appears less than 5 minutes in the movie. Hahahaha
Nice review as always! I guess now I know what my first Real Grade will be! Thanks!
Gundam 00 is THE BEST series
Jack Anderson hahah no Gundam 00 while enjoyable isn't perfect
Jetfire48 he said it was the best, not perfect.
Jack Anderson yes yes yes yes yes yes yes yes
Jack Anderson true not perfect but it is😎
I'm glad you noticed that the arms aren't suppose to be symmetrical but there's a white part from the D Runner that goes on the back of the left arm so I hope you didn't already lose that part.
haha, no I have that and I fixed it later! I was wondering about that!
ZakuAurelius
yeah on one page they show the armor assembly of the right arm and then on the next page they show the armor assembly of the left arm and since they give you doubles of both those runners I can totally see how it would be easy to get confused about that.
I like this kit a lot, but the 00 Raiser is still my favorite RG kit
that kit is great!
5 years after, is the RG still holding up?
the upper arms joint became loose overtime,the other part still holding up pretty well
Getting PG Strike Gundam as my first Gunpla. #Y0L0
Nice! I never built a PG Gundam before and hope you enjoy your PG Strike Gundam!
My god u r beast
Tri Quach so savage jumping rite in aren't you i like it
Tri Quach 1972 I know this is late but I think you shouldnt get a pg its hard and considering its your first you should probably start with a HG
Bruh I start with fg and it takes one hour to completed haha.
The Dorito torso proportions are hilarious! Great review.
Strange that it has those shields on both forearms. The original only had that on the right arm.
The blue and white forearm part was mirrorred so you can either have it symmetric, too bad for the shoulder unless you did not attach the shoulder tip
Router25 they are actually selling the an extra sword that goes on the right shoulder. you can exchange the sword with a spare shield, but that would obviously cost more than youv want it to.
There would be a p-bandai release of the full saber variant! 😀
this review is awesome...now i know a lot in this kit
I have all Setsuna's MS: NG 1/100 Exia Trans AM mode, PG 00 Raiser all painted and water slide decals. Also the MG Quan[T] to do. For the other Gundam Meisters I have all in NG 1/100 Seravee, Arios and Cherudim in Designer's colors. Of course I have all water slides decals already for the kits (stickers are awful) I have to do but for now I'm focusing on my Zeta and ZZ kits.
Done painted and water slided: MG Zeta (my second Gunpla and the first kit I painted with Tamiya Bombs before I got my airbrush) and MG Hyaku Shiki 1.0. Building now: MG RX178 Mark II 2.0, got rid of some seam lines, primer them and also the white pieces. To do: MG ZZ Full Armor and Qubeley MKII. I just need the water slides for those two.
On a side note I hate modifying my kits except for some detailing. When I buy a Gunpla it's just like when I'm buying a figure, I want it to stick as closely to the original. I just paint, panel line, a bit of weathering but not too much, water slide, top coat them to give them a realistic look.
00 qan t is a really cool mobile suit. Such a shame it's got so little of a screentime
zaku you may have built it wrong has the lower arms do not have 2 "gauntlets" only one
i do like that you can make this kit symmetrical
the left arm is supposed to not have the blue forearm bit. its supposed to be less armored to balance out that massive shield i guess??
Awesome review dude. The "Shoulder Pack" on the kit is it's shield btw. lol
Good review. Have you seen the pictures of the HG 00 Qan[t] Kai from the GBFT special that'll be coming out? Any thoughts about how it'll compare to the original Quanta, since Shia replaced the GN Sword V and the sword bits? I always thought the GN Sword V's Buster Sword looks a little goofy, being so long and flat.
The other kits of interest to me are the Scramble, also from the GBFT special, and the new Barbatos Lupis, which I think will be to season 2 what the first Barbatos kit was to season 1. Mid-season upgrades, right? No new Grimgerde yet, however the new enemy mobile suit has a more unique design for the Gundam franchise. And as usual, no extra posing hands yet.
Yeah I talked about the HG Shia Qant in my last Gunpla News series and in the live stream yesterday.
ZakuAurelius What're the Cliff Notes for those who don't want to sit through an hour?
Hey Zach! Were can we find this clear color hexagon action stand?
obviously the store... stupid
Kotobukiya Flying Base R. A quick Google search should give you plenty of results. HLJ or Amazon probably being your best options.
ZakuAurelius Thanks a lot!
my Quanta's faceplate and crown thing keeps falling off yours doesn't seem lose.
Yeah I didn't notice that problem.
What action base did you use with the mobile suit?
I like preemptively staving off the 00 fans, but on that note have you considered checking out the rg astrea?
I like the Astraea design! So I have the HG of the standard and F-type. But not interested so much in the RG. The more details and part separation is cool, but HGs have more weapons and better proportions in my opinion.
+ZakuAurelius I can get, that. cheaper option too lol
does the joints of this easy to loose? like the arms and legs?
Are you planning on getting the BTF Full Saber add-on for this?
The BTF Full saber is for the MG. Not unless they made a new one for the RG.
Edit: found this: www.gundamkitscollection.com/2016/06/rg-1144-00-quanta-full-saber-add-on-3rd.html
+Redentor Marquez III insertCertainpsychicpokemom
Possibly~
The MG qanta full saber is a new, full kit, and there's also a p-bandai RG full kit
Did it age well?
My Qant head also kinda loose and very easy to pop off maybe because it hole is little bit bigger for the ball joint to fit in . Is there any solution for that ??
Super glue? You can super glue the head to the joint, but it won't move. Sorry I couldn't be much help
As a huge UC fanboy, who hasn't been very impressed with most of the other series ( Even wing which got me into gundam originally). I thought OO was fantastic, it felt like a complete story almost of UC level. unfortunately awakening of the trailblazer left me a bit confused, and the lack of on screen time for the Qan T was a letdown.
I don't think the 00 Qan (T) was meant to actually fight. It was made strictly to utilize the Twin Drive System to communicate with other life forms using Quantum Brainwaves. That said, I also was letdown by the Qan (T)'s screen time.
Can the GN bits be held in the reverse like the GN daggers for Exia?
yeah sure!
What kind of action base is that? I’ve been looking a clear one just like the one used in the video
Kotobukiya Flying Base R
Is HG high grade? What is the grading I don't understand. I have a HG and a MG. please help
Yep HG is High Grade. You can check out the first video in my Gunpla Building playlist where I explained the grades!
High Grade: 1/144 scale, within the $10-30 range, simple, smol, snap together build
Master Grade: 1/100 scale, within the $30-70 range, somewhat more complicated and usually with mechanical gimmicks, somewhat larger, snap together build
Real Grade: 1/144 scale, pretty much a Master Grade but with High Grade size and price, snap together build
Perfect Grade: 1/60 scale, usually hundreds of dollars, stupidly but amazingly complicated, detailed and gimmicky, stupidly huge, requires painting and specialized tools to assemble
RE/100: 1/100 scale, MG price range, but not as complicated as Master Grades, MG size, most Mobile Suits in this line are somewhat unknown and sometimes huge in-universe, snap together build
00 Quanta doesn't see action until the final portion of the 00 movie.
are the waterslide decals optional?
It doesn’t include any
@@ZakuAurelius oh nice
@@ZakuAurelius does this also include a stand for the figure?
Cannot wait to see your review of the quanta neko......... Um
More like 00 Quantnya
+Gilgamesh i ser what u did there
which one better, this kit or rg 00 raiser kit?
Personally I like the OO Raiser, but both are great kits.
thanks
The head on mine is a problem. Never really secure, always comes off when I'm rotating it unless I actively press down on it. Looks similar to the issue that RG Sinanju has.
Don't worry about -haters- people worrying about the completeness of the review.
Aside those grips on the GN bits, is there another loose parts?
Thanks for another great review.
As you could see, the head popped off kinda easily while trying to show the articulation. other than that no problems.
Such a shame though that the RG didn't have the Quantum burst Gimmick. The MG version has it.
Only the Metal Build can execute the Burst Mode properly. The MG's chest Condenser doesn't pop out.
you forgot the gm..gn?........the green circle. the green circle on its backpack can come out and it looks kind of cool. you could as a joke have the 00Q hold it like a soda can lol
I might just do that. Hehehe.
is it possible to attach the shield binder to the right side?
josef yanga not without some modification.
overall is the rg better than the mg version of this kit or is it the other way around ???
Adrian R I’m not sure cause I haven’t built the MG but usually I prefer MG over RG
Want to ask, does RG OO Qant have an issue in the GN Shield connection area? Because mine is very loose
Dammit now I notice the sound even more :D. Gets kinda creepy with headphones when it feels like you are behind my left ear. :D
lol, sorry~~~
the 00 qant is the one of two ms I like from OO the rest is just ok
Does gundam info have the movie?
Ethan White check out KissAnime or 9anime
What does 00B stand for?
It stands for "out of box" which I mean as this is exactly what you'll get out of the box with nothing extra done to it. But others use "out of box" to mean that it's painted in the colors it's meant to be.
Ok thx, now I know what it stand for
heh so my shield on my quanta became loose (the blue peg that connects the shield to the backpack on that grey thing) after trying to swivel it around to get it to look good on the back does anyone know how to fix it :3
two layers of flat coat should also do the trick in a safer way since they increase friction instead of just making it thicker.
go for four layers if two arent enough
Lol thicc and long robo legs. A man of culture, i see.
HAHA! love the intro! not that my trash opinion means anything.... but the series was good.... save your time and brain cells and skip the movie.... it's great animation, story is Eva levels of confusions and shark jumping... again, IMTO.
keep up the good work and mute the haters.
hey i love hearing other people's opinions, as long as it's respectfully stated!
cheer up lol.....even though its 6 years later
GN SHIELD...GN SHIELD...
I actually pronounce the 00 Qan [T] (Double Oh Kon Tuh)
What i do like from 00 series is their head design, i watch other gundam series, so far for me the head 00 series is far more beautifull from all gundam franchies.
there's something about the proportions..
yeah...i agree...it seem a bit buffed up for some reason...haha
the hg is in better proportion
I think they made the legs shorter so the frame is more dense and doesn't want to do the splits as much as it does on the Exia or 00
It's more beefy so it looks more badass then the MG
They designed the chest area too wide. Setsuna loves his Gundam after all.
Good review but it felt like it went on a little too long
I don't know like a good time for review video for me is anywhere from 10 minutes to 18
Zakuaurelius likes them thick thighed. A man of culture I see
backpack back baking baked
i think you really need to watch the 00 series if u havent... in my personal opinion the 00 series has the best story since wing series came up.. sorry for being 00 fan... but ur review is almost being reverse-bias.. oh well i still like u as a reviewer.
His watched S1 and S2, he just hasn't seen the movie.
I'm in the same boat, but I still love the Quan[T] regardless.
i see.. it juz pains me that he didnt like qan t... coz imma buy my next MG this week which is qan t... been wanting it for a long time but instead i bought freedom 2.0 and barbatos last week
roberto balaguer I wouldn't recommend the MG Quan[T]. Its got a ton of issues. A lot of which seem to have been fixed in the RG version.
i stopped collecting RG already coz the bigger MG seems a lot better in shelves.. having 10 MGs with RG beside doesnt sink to me.. ill juz wouldnt do the combined sword thingy coz of the weight issues.. and it looks bad to me IMO.
+MrFlunkorg i have the MG 00 7 Swords and he has very weak joints. almost every joint uses polycaps.
He looks great on a shelf, but he is a chore to pose
QAN
really like 00 qanta, but the mg has serious flaws, and RG is too small X( (im too picky)
The proportion just turn me off, just like you mentioned in the review....I feel the same about it. I have the MG and I don't think I want to pick this up and the new soft plastic is terrible.........ABS plastic is so much more sturdier.
That's one reason I'm avoiding buying newer kits.......
Watch the movie it’s bonkers
First Like and First Comment.And Great Review
Thanks bro!
Telephone gundam people claim to surpass Turn A lol.
Autocorrect error there? haha, anyway, yeah Turn A is still the king.
If you want to get to know the suit better... dont. Its from the 00 movie and thats one of the worst things to come out of gundam. I'd rather watch G-Savior.
MaxSonic it's a shame I really want to watch 00 but I heard it shits the bed hard
@@EXEGUNSO I mean, I'd suggest watching it, since its a hit or miss show, you either like it or hate it
@@EXEGUNSO the movie is confusing...so Skip it if you want but the first and second seasons are great and I do reccomend watching it
Hey Zak. Should I buy this even if I already own the HG version? Which was also a very good kit by the way.
In my opinion, you should get this kit. Based on all the reviews I watched, this RG is really, really good. Posing, articulation, details, stiffness - everything is good! Of course, you can find minor problems here and there, but nothing enough to skip this kit. Hope I have helped you :)
Get the RG. I bought the HG and while I like it, I really should have waited for the RG.
I haven't built the HG, so I don't know how good it is. But I'm sure this is at least As good, but probably better in a lot of ways. Definitely worth the $25-30 if you're a fan of this Gundam.
+ZakuAurelius Thanks man. I usually skip RG kits if I already have an HG version of it. Since I don't have an HG Sinanju, I'm considering getting the RG version.
@@anthonypascua4878 no! the rg sinanju is not that great