Replaced a Makita saw with the Bosch. The zero wall clearance is a big plus, it is also very accurate. Cutting mitres is accurate, meaning I can cut them quicker than setting up the mitre gauge on the table saw.
Don't change your video style. I'm very interested in the overhead wiring and air compressor ideas. I'm 68 and need to rely on mechanical advantage more every year. Great channel!
Was about to buy your plans for the all-in-one workbench. Now I see your 2.0 version will be modular instead. THAT is exactly what I want to do too! Take my money!!!
Dude you are all good. No matter what you do you will always want to do something different later. Striving for perfections is noble, however unattainable. You have however given me a great idea for my workshop. I was going to build one large bench to rule all my tools, however after hearing what you were saying, I realised i could build a separate table for my Dewalt thicknesser on an oversized flip top stand which would then flip to bench height and when not being used I could have on the other side a clip in doghole bench and clamp. I am not sure if this design in my head will work, but my point is you are on a journey and your creativity helps others. Thanks mate
Love your show! Can’t wait to see what you think up next! I’m a big fan of small and mobile since I’m A petite female. I’m blessed to have a big shop but I don’t have the strength and height to work with large pieces. I’ve purchased all of your plans in the past. Can’t wait to pick up this latest cabinet.
Hi Jean. Have you ever had a look at how Ron Paulk designed his Smart Benches? I really like the idea of being able to hang the benches on wall cleats when I need the space and the space it has for the tools that you use. Sometimes I need outfeed tables and other times I need open space. My philosopy is also to have as little tools as possible, like the bare minimum. Also, I built a traditional tool chest on casters. It is amazing how many tools you can fit into a good english tool chest. It also keeps them dust/rust free. Can't wait to see what you plan on doing next!
chris at a glimpse inside woodworking had a really great over garage door lumber storage rack years ago in his old workshop. might be good idea to check out. it was the best i ever saw and allowed full sheets of plywood to go in that wasted space above the garage door. and can easily be tweaked to have lights and other capabilities on it
I found the video. It actually had a light on it that was under the garage door for when he needed the door open but still light (hot in florida). it is called "Space Saving Wood Storage Solution with a Dual Purpose | A Glimpse Inside How To" by a glimpse inside. hopefully it is helpful to someone :)
Bosch saw is great, we've got two at our shop. However, one of them the bearings on the swing warms are wearing out. The big problem is that you don't realize it but your cuts start to diverge from your settings. Just a heads up. There are some videos on replacing them though. Will be trying that shortly. Best of luck on the new workshop setup! You always do amazing designs!
As someone who has a workshop smaller than a single car garage, this channel has always piqued my interest with storage ideas, so whatever you come up with I’m sure it will be amazing and thought provoking. For me, trying to figure out what tools I absolutely need and which tools are simply “taking up space” is what helps me to maintain the maximum space available for working space. Unfortunately this means (for now at least) that some options are out of my reach. ie, cabinet sawstop, outfeed/assembly table, proper materials and hardware for projects. But this forces me to figure out how to make things another way. To “think outside the box”. So please don’t stop sharing. And I’m sorry about the rolling blackouts 😢
The Bosch is brilliant. I use mine on every project. I have a cramped 2 car garage and chose it because it does go against the wall. Good luck with your new projects. With your engineering and design vision I am sure you will make it.
Very interested to see what you come up with. I have a single car garage that has to share between woodwork and yard/garden so space is premium. I think my first big woodshop purchase was my miter saw - Bosch 10" sliding compound saw. I love it. I'm fortunate to have a concrete driveway and most of my cutting and sanding is done outside to minimize the sawdust. So far most tools are on rolling stands so makes it easy to setup outside and roll back in for the night.
I have the Bosch miter saw and love it. I am also in a one-car garage with concrete walls (sound familiar?) so my space is at a premium, too. Thus, the Bosch’s space saving was imperative. I can’t find anything to complain about the saw, and fellow UA-camr @shopnation makes a dust collector piece for the Bosch which does a decent job. I very much enjoy your videos - cheers!
Looking forward to the new shop build. I enjoy seeing your well thought out ideas and unique approaches to your particular size restraints. Working within your shop space and budget are the things I can relate to.
The 12" Bosch Glide is a nice saw minus the dust collection. I sold mine and bought a 10" Makita front slide saw. It is an awesome saw with great dust collection and about the same price as the Bosch (at least in the USA). Hope this helps! Good luck!
You could always look into the Bosch CM10GD, or the EU counterpart. It's a bit cheaper than the 12" and it has the zero clearance feature. Just a thought. By the way, I can't imagine how much time you spend setting up your shots. You have great vision when it comes to moving from one angle to the next. Something I will need to think about on my future videos. As always, great video and thank you.
I just bought that miter saw about 2 days ago and so far its amazing. The expanding wings were a very pleasant surprise and the sliding mechanism is smooth and feels VERY sturdy. I was on the fence buying it for a few months, but super glad I pulled the trigger.
Using your "Z axis" is crucial in small spaces. I do that myself and at almost 2 meters tall, it's easy for me to do. Mobility of things that have to be on the floor is also very helpful. I like the thought processes you're employing with the ideas for the future of your shop. Can't wait to see what you come up with. I find that the simplest solutions are the best in my own small shop.
Bosch is absolutely amazing, you will wonder why you didn’t buy one already. As for over engineering, that is some the best projects you do. I can’t wait to see how you set it up!
I upgraded from a DeWalt 216mm mitre saw to the Bosch, it's a huge improvement. Definitely one for the workshop though, it's very heavy and you wouldn't want to be moving it around much. Definitely in not in and out of a van!
Keep up the good work and quality videos. Best of luck moving forward with the redesign on your workshop. I think your space-saving ideas are great solutions for those of us with smaller shops.
My workshop is also tiny at 4mx3.5m. So everything is mobile and storage is on high shelves and cupboards. As you mention, shared space is the key to organisation, so infeed and outfeed space can be used to access multiple machines. I have the Makita LS1019 sliding mitre saw which I picked up second hand. The forward facing rails and the front mounted lock knob for the tilt mechanism are so much better than anything with a rear rail system. I have it mounted on a flip cart with my planer as the balancing machine.
Hello Jean. I think it is completely attainable. I have my table saw, 14" band saw, router table cabinet, lathe cabinet, drill press cabinet and two work benches all on heavy duty wheels in my single car garage workshop. Dust Collection, cabinets, storage, wall storage, wood storage are all above bench height as you noted. Before you jump into the Bosch miter saw take a look at the Makita LS1219L or LS1019L. I have seen many people comment that the Bosch (or Delta or Rigid with similar mechanisms) feel that it is not as stable/repeatable as it should be and that it deflects too easily. I have an old Porter Cable 12" non-sliding saw and have been looking at the Makitas as a replacement front runner. It uses a more traditional dual rail/rod system but is configured in a way that gives it good rear clearance.
Personally, the Bosch GCM-12 was a great investment. The lower wall clearance is great if you need to get the saw right against a wall to save space like you mentioned. However, it isn't exactly zero because if you are making a miter cut, the belt housing does need some space to rotate. The saw is belt driven and has plenty of torque to cut through large, dense stock. There are three upgrades I recommend though: a larger fence for support, a zero clearance insert to prevent off cuts falling into the throat plate and help direct more saw dust to the dust boot, and an upgrade dust boot like ShopNation has engineered. There are other saws with low wall clearance. Some, like the Delta 12" Cruzer have articulating arms like the Bosch while others simply have the tube rails coming out the front instead of the rear.
I think because you have a tablesaw, either the big one or a semi-permanent contractor saw, upgrading your mitre saw may not be totally necessary. If you have to cut anything too big for your little Metabo, consider using the tablesaw, or even a circular saw. I’m moving into a new small workshop space and I’m excited to steal your ideas! Thank you!
I think the only reason he wants a new saw is to go to a folding-arm-style instead of the sliding-rail-style he has now. This allows you to keep them up against the wall because there aren't any rails that stick out the back.
I would like to offer my humble opinion about your video style which on the hole I personally think is great. I like that you mainly talk and explain your reasoning. I like that there is no music, I always prefer videos with the natural workshop sounds. My only very minor grip is the number of times you switch camera unnecessarily in my opinion. If you are switching from you talking to a more suitable view of the project, then that make sence, but when you switch from you talking from one direction and then you are really still talking about the same thing but from another direction, that detracts from your overall flow. But as I say, this is a very minor grip, but being more selective about your camera angles may improve your videos. As they say "less is more". Anyway keep up the good work. Looking forward to upcoming videos.
I'm looking forward to seeing what you come up with for overhead storage. I think this is the most under-utilized space and haven't seen many people try to find ways to utilize their ceiling space. I have a garage with a ceiling under 8 feet tall, so I can easily reach it. Mainly I plan to use it for clamp and lumber storage. But I also and planning storage for cans of paint and finished that just pivots down on a steel bar. Those few things along would free up a lot of wall space.
He man great info video, I live in SA had have a bunch the same tools. I started with the Metabo, and now have been using the Bosch that you are looking at, an can tell you it's a beast. It does everything better, but there are 2 down side to it, one is THERE IS NO DUST COLLECTION, and second its HEAVY. your current way of flipping up the miter saw will not work with the Bosch. then look into hose reels, you can get empty once from Adendorff, and the same with retractable leads, They are pricey but wort it, and would met you setup for videos easier . Good luck and hope you have fun with it, I know your pain. And you are doing a great job and is very entertaining.
I love the energy you bring to your channel and your content. I look forward to seeing the redesign of the shop. I'm glad you decided to keep the table saw, that was one of my favorite projects you've done. Cheers!
I love the videos as space saving / efficiency of use is important to me too. I’m super excited to see where you go with the modular workbench because it sounds like something I’ve been wanting to do as well. I have also considered mounting an electric hoist &/or pulley system in my roof to keep as much as possible stored overhead but easily accessible whenever needed, so basically figuring out how to use the “unused” space. So if you gave ideas on that, I would love to get your ideas.
Love the concept overall my only concern with linking up multiple small mobile carts together in a small shop is that variations in the floor get amplified at the bench top and you could have some unevenness in your work surface. Can’t wait to see your solution though. 👍🏼
I have the Bosch saw, and although it is space saving and has a number of advanced features, such as dado/rabbet capability, these are overshadowed by the slop in the sliding capability. There are some online videos on how to optimize the slop, but I’ve not had time yet to try them out. But for the price, I would have expected the slop to be minimal, to not noticeable. Unfortunately, this has been quite a disappointment.
The Bosch is nice, but it is not the only "space-saving" mitre saw. What you should also consider are saws that have there sliding mechanism attached toward the User. Most famous with festools capex. But Metabo also hast a Product Line (XACT) that hast that style. As well as Makitas LS1019 and ls1219. There are probably planty others, but the mentiond ones are a lot cheaper than the Bosch (a least where i live) and not worse in Terms of Cut accuracy and quality. But they miss the overengeneered prowed that you sometimes feel when your subconscious tray to justify your extra expanse...
I think a problem alot of people run into is trying to make a "big shop" in a small space. I like your approach. I have a 3 car garage but I use a little over 1/2 for my workshop and the rest is garage/car parking space. I have tried a few layouts to maximize workflow. Looking forward to seeing your progress.
Please don’t change your style. I’m eager to see how you approach your refurbishment, as I am just creating my own workshop. I would think twice about the Bosch or at least wait until you’ve finished designing your space. I’m using my table saw more and only have a small chop saw now and it’s working well so far.
You covered this but modular, small benches that can be moved and configured. Being able to push them together or into a corner is huge. This is also a design idea that viewers are gonna love and be more interested in making themselves. Integrating tools into benches makes it much more difficult to design for longevity. I believe you can do it but definitely keep simplicity in mind. Good bench is a solid bench.
I am sure you musty have thought of this before ? you know best if it is possible - I built a little shed against my garage on outside - you could store your compressor in this shed and just have power and air line feeding into garage . pipe against wall with well placed outlets will mean you plug in where you need - yet keeping some noise out of garage
I have experience with the U.S. version of the Bosch. I think it is a phenomenal machine, but as you stated, the cost difference is significant. Your videos are great! I personally don't think you should change, but it's not my call. That's 100% up to YOU.
I have the Bosch, and honestly it's a very good, but not excellent, saw... At least the one in the USA. There are a few quibbles, but the main thing is that the cool armature mechanism has way too much side to side play in it. For the price, i find it unacceptable, but i got mine barely used for a very good price, so bought it anyway. If you have access to it, I'd recommend checking out the the Makita with the front facing rails. I don't own that exact model, but my rear facing rails version is much more solid than the axial glide arm, and the front rails seem to be as well. Also, if you don't have specific need for a 12" saw, I recommend the 10" instead. My Bosch is the 12, but rarely need that capacity and the saw is big and heavy, with much more expensive blades that have more deflection in them, so they are a little less accurate. I find the 10" slider the best compromise of size, accuracy, capacity, and ongoing costs for the vast majority of users. Bigger is not always better even if you have the room, but in a small shop, much more so. Looking forward to seeing what all you come up with!
I’m interested in seeing what you’ve got in store for this garage build, I too am having space problems, my workshop is 3x4m big and it’s PACKED,,,, after watching all your other videos I’m confident you will surprise us with you ideas, you always seem to have good ones 👍🏻 keep up the good work
I have the bosch mitre saw with a smaller side work shop, Its a fantastic saw absolutely brilliant, you do save some space with it. HOWEVER the dust extraction is terrible!! I know you can get 3D printer plans to make an new dust extractor that will make it a thousand times better, however I do not own a 3D printer so have learned to deal with it.
I don't own the Bosch GCM-12, but I have used it. Comparing its features to my current miter saw, which is a DeWalt, I have to say the biggest advantage is the zero-wall clearance. Keep in mind, it has a smaller footprint as well, since there are no sliding arms swinging on the back either. And the better dust collection. (I built a box around mine to combat the dust a miter saw tends to generate...which of course added to the clearance needed) And the smoother operation. (the DeWalt is great, but the Bosch requres a lot less effort to operate) And the more solid depth stop. (not sure how often you use this, but I use mine all the time and it's...I'll just call it bouncy) Plus, something that likely doesn't affect you but still...no mixed SAE/metric parts. DeWalt does that on their American models. (I prefer metric because it's sane, but either way, a single system is always preferred) Overall, I'd say that were I able to afford it, I'd upgrade to the Bosch myself.
Whenever I look for videos of "small shop" I mainly see videos where people have spaces around 20x20 feet or larger for their so-called small shop. I can't find much on truly small shop ideas. You have been one of the fee that offers true small shop innovations.
You always have fantastic content and brilliant ideas on how to approach projects. Keep it up! Regarding the miter saw I have the Bosch saw (for several years) and I love it. The flat against the wall feature is great, but besides that it is rock solid and extremely accurate, and while no miter saw has great dust collection there are aftermarket add-ons that work very well. For a small shop the Bosch mechanism can’t be beat.
Hi Jean, I have the Bosch saw here in the UK and find it to be generally an excellent tool but with some reservations. Firstly the zero clearance at the rear of the saw isn't truly zero as the motor requires space when swinging for mitre cuts. Not a major issue but you will need to take that into consideration when designing your new bench. Additionally the glide mechanism is great but can flex a bit if you're too rough with it, which can create issues with accuracy especially if using the (very) basic trenching facility it comes with. The dust collection is terrible, I know that can be said about almost all mitre saws but the Bosch is really bad. Shop Nation (www.youtube.com/@ShopNation) make a great upgrade for the dust collection but this isn't perfect by any means. You'll need to upgrade the clearance plate to a zero clearance one as the gap in the factory one is huge, almost cavernous. You'll also need to beef up the new bench as the Bosch is a real chunky monkey. Good luck with all the changes, we'll all be watching closely to grab some great tips along the way I'm sure.
I like seeing the results of finished projects first, and then watching how the maker produces them. This way I'm not distracted by trying to figure out what is being built. Whether you choose this path or not, I will still enjoy watching your videos. Cheers.
Used the Bosch, Makita and Fesstool zero clearance mitersaws. Festool is probably the best but honestly I prefer the Makita, just feels better. And about 1/2 the cost. The Bosch we had nothing but problems with. The joints become sloppy rather quickly loosing its accuracy. Had it replaced once, and that one repaired once before selling it off and getting the Makita, which was flawless. If not needing the big 10 or 12 inch blade you can also get the Makita in 7 1/2” (190mm?) blade in cordless for about the cost of the Bosch. And help with power issues that way? Just a thought.
I have the Hikoki Mitre Saw and it's a great saw, i used to have the same saw as you have the Metabo but like you i wanted it against the wall, the Bosch saw looks great but a great price comes with it so i looked around and found the Hikoki Mitre Saw, and this one has glide bars but they are at the front so it's much better to push up against the wall. I think it's a cracking Mitre Saw and i wouldn't swop it for the Bosch that's how good i rate it, there are of course different prices, for starters i'm in the UK and also there are the different Blade Sizes and the price now might be slightly different, mine is two years old and i have not had one problem with it mine is the HIKOKI C8FSHG 1100W 216MM SLIDE COMPOUND MITRE SAW the cost was £156.67 but including VAT was £188.00 i hope this helps. Take Care and Stay Safe, Barry (UK) 👍
Hi Jean, can't help with your mitre saw choice but keep going the way you have and your final design and builds will come out brilliantly I'm sure. Your ideas and vision are great, as are your attention to detail and execution, so believe in yourself and keep trooping on. Hope all is well with you and your family (that's where your time goes! 😉) and good luck. 👍 Good luck also for a couple of weeks time from an English man! 🏉🇿🇦🏉 (🏴🙄😅)
I would say its hugely overengineering. HOWEVER, how fun is it to overengineer and geek out on it? Go for it! I subscribed and I am looking forward to it!
If you like your Metabo saw and your only problem is that you can't push it all the way back to the wall, the "Metabo KGSV 72 XACT" or the "Metabo KGSV 72 XACT SYM" might be worth considering. I use the latter one and am absolutely happy with it. However, it has a smaller blade than the Bosch.
Thanks for keeping it interserting and raising expectations for new ideas... should be fun to watch! Have fun with it, stay focused on "why you do what you do" more than, "what you do"... Even amongst the ever changing whims of the utube algorithms! They are becoming more antagonistic and controlling toward you all... Personally, I couldn't work for them! utube givith and utube taketh away!
Check out the Wen M1215 12” miter saw. I personally have one, and love it. The motor actually rides on the rails, rather than being fixed to them. This feature also allows for zero wall clearance. The major difference is that it’s significantly cheaper than the Bosch you’re looking at. Wen is one of the companies responsible for the creation of power tools, and has been around since 1951.
I feel compelled to give an opposing opinion re the Bosch mitre saw. I replaced a fixed-head Dewalt saw about two years ago….and initially I REALLY REALLY REALLY wanted the Bosch saw, for the obvious reasons. I began looking at UA-cam reviews and came across several users who were very disappointed with the accuracy of the cuts. One in particular was very comprehensive, with him showing video of his zero clearance throat after a period of use. Right up against the fence the cut was probably good enough, but at the extended end of the cut it was all over the place. He also outlined his attempt to have Bosch look at his saw, and that was pointless….they required him to pay for two-way shipping, the cost of which was prohibitive. I still wanted this saw to work for me…the visual appearance of the engineering impressed the hell out of me. I visited two different tool dealerships and examined their display models. On both occasion the left-right flex, when the saw was at full extension, was completely unacceptable. Of note….it didn’t take much force to make it flex…I completely understood what the previously mentioned reviewer was dealing with, and so much for the “appearance” of clever engineering. The good news is that it’s easy to determine if what I’m saying is still valid…just give it the flex test….👍🏼
My Miter saw for against the wall is the 10” Makita. I did have trouble with the saw as soon as it came out of the box. There was wobble in either the bearings or the arbor shaft ? Makita stood behind the saw and its a WONDERFUL saw now. Good luck , shop space is a HUGE puzzle and constant challenge.
For a space savings and cost savings. Not to mention saving my back when I move it around. I went with a non sliding 12” dewalt miter saw. I’ve rarely come up with something it doesn’t have the capacity to cut. If it’s over 10” wide I just grab my short track with the track square and my track saw to cut it. I’m very interested in your new shop design. Looking forward to stealing some of your ideas. Love that tool cabinet!
I love thé ambition. I am thinking along similar lines for modular workbenches using ideas from yourself, Paoson Woodworking, Hooked on Wood and Rings Workshop.
Pretty ambitious to have a mobile workshop. A 3 or 4 part workbench is a very good idea. Do that. If you're using 1 fase electrics you can make a retractable suspended power plug from the ceiling.
Please take a look at Makita Miter Saw options........they have the same space saving offering with.......in my opinion the best dust collection set up. Whatever you do, I wish you much fun in all that is ahead of you!
Even in a larger workshop there's never enough space to work on large things without clashing with other kit. I had also concluded that mobile benches makes sense. However, I don't have your skills or determination, Jean, so I'm planning to use multiple individual ruggedised kitchen units with melamine worktops. The power tools will be simply fixed one to each bench and then they can be wheeled into the required positions. Hopefully, I can arrange some clipping mechanism to lock units together to create larger, more stable surfaces. I'm looking forward to seeing how to do it properly, Jean!
Jean, maybe for overhead storage, small motor and pulley systems could be used. Bring the storage down to you, instead of climbing up to it. With the proper design, you can lift a good load, with a relatively small motor. I may be slow, but it is all about space. 😁✌🖖
My two cents: I'd focus on productivity (video-productivity that is) rather than spending too much time on editing quality. I guess publishing more regularly would benefit the traction of the channel better and that could generate more revenue that you could use to maybe hand over editing jobs to an external party. About the shop itself: modular is probably the way to go but make sure changing the layout doesn't take too much time, or you won't use it as intended, but you'd probably figured that out already...
The Metabo C12RSH2 or C12RSH2(S) also has the ability to bump it directly against the wall because the sliding portion is fixed to the back and it slides forward. and at least near me is a couple hundred dollars cheaper. The only thing I wish the Metabo has which it does not is the shadow line instead of the laser for lining up cuts.
Hello, what an awesome and inspiring channel you babe! Found you because I'm just putting together my own first workshop in a single car garage. Only difference is that it also needs to operate as a bike workshop as well so I'm setting up an area for that and storing the bikes as well... I'm certain many of your ideas would find their way to my shop c eventually so thank you!! Definitely subscribed after watching you build that smart tool cabinet for the wall!
Not sure if you've bought a new Miter Saw yet... but Metabo also makes a "zero wall clearance" saw: Metabo HPT C12RSH2S Sliding Compound Miter Saw, and is about half the price as the Bosch GCM.
I think you should define how the shop will be used. What types of projects will typically be performed? Home renovations require different things than furniture making, for example. I think if you are aiming for a shop that does it all, you will end up with one that does nothing well
I have been to SA many times to hunt. It was sad when I came last year and was told of the rolling blackouts. My PH had spent quite a few Rand to get a fully functional solar array and battery system because of these problematic blackouts. I have nothing but the kindest wishes for those in SA dealing with poor management of the power companies.
Good job Juan, good job. Keep doing what you're doing. I am anxious to see your wood storage solution. That is currently the biggest pain in my one garage shop...
I carefully planned every inch of my garage to maximise use and made things mobile where I could. I've always thought you did things right with that table but as soon as I started seeing too many storage units on walls I think that's probably where things went a little tight/crowded. Your new ideas seem to make sense and really looking forward to your modular table(s) idea as that sounds way more versatile and adaptable as you say. The fact you are pointing in a direction at this stage with determination already tells me you're doing things right and I'm already confident I'm going to enjoy the videos.
I don't know if you follow @Tested but take a look at some of the carts that Adam Savage has made. He makes use of a lot of mobile carts. His workshop might be bigger than yours, but some of his philosophy might be helpful to you.
The Bosch is a good saw, but a dust monster. Just have a search on UA-cam on how many people tried to get it under control, most failed. The Makita shares a similar price point with similar features, but a lot cleaner and then there is Festool.
Never had one but if I could I would get a festool mitre saw, I watch Jon peters in the USA who is a professional carpenter who had the bosh but decided to change as the bosh kept misaligning
A dynamic workshop is a necessity for you given your space constraints. However, how will you ensure that the benches are level with one another when you move them around? Having to level them each time you change the configuration will be too much of a time suck. Is there some way you can ensure that the floor of your workshop is level?
I like the Ideas you always come up with to maximise the space you have, did you ever think do mount the mitre saw (which you probably not use soooo often as you think now) on the wall on a slitting system? bring her down when you need and back up when you don't
I've got the Bosch saw and I like it but it still takes up a lot of space as it's a bloody big unit and has power to spare.The only down side of it is the extraction system(it's no where near as good as my son's dewalt.Hope this helps
Love it all… don’t change! 👍
I look forward to watching your progress!
Go for it! Can't wait to see the result.
Thank you for the updates.
Look forward to seeing what you come up with.
Replaced a Makita saw with the Bosch. The zero wall clearance is a big plus, it is also very accurate. Cutting mitres is accurate, meaning I can cut them quicker than setting up the mitre gauge on the table saw.
I have that bosch saw and it's fantastic all round.
Don't change your video style. I'm very interested in the overhead wiring and air compressor ideas. I'm 68 and need to rely on mechanical advantage more every year. Great channel!
Was about to buy your plans for the all-in-one workbench. Now I see your 2.0 version will be modular instead. THAT is exactly what I want to do too! Take my money!!!
Looking forward to the project, Jean! 😊
Stay safe there with your family! 🖖😊
Dude you are all good. No matter what you do you will always want to do something different later. Striving for perfections is noble, however unattainable. You have however given me a great idea for my workshop. I was going to build one large bench to rule all my tools, however after hearing what you were saying, I realised i could build a separate table for my Dewalt thicknesser on an oversized flip top stand which would then flip to bench height and when not being used I could have on the other side a clip in doghole bench and clamp. I am not sure if this design in my head will work, but my point is you are on a journey and your creativity helps others. Thanks mate
My space is about the third the size of yours, so I’m excited to see what you do that maybe I could implement.
Love your show! Can’t wait to see what you think up next! I’m a big fan of small and mobile since I’m
A petite female. I’m blessed to have a big shop but I don’t have the strength and height to work with large pieces. I’ve purchased all of your plans in the past. Can’t wait to pick up this latest cabinet.
Hi Jean. Have you ever had a look at how Ron Paulk designed his Smart Benches? I really like the idea of being able to hang the benches on wall cleats when I need the space and the space it has for the tools that you use. Sometimes I need outfeed tables and other times I need open space. My philosopy is also to have as little tools as possible, like the bare minimum. Also, I built a traditional tool chest on casters. It is amazing how many tools you can fit into a good english tool chest. It also keeps them dust/rust free. Can't wait to see what you plan on doing next!
Your original ideas are a joy to watch, from early development to final finish. One tool missing is a bench mounted band saw - so many uses.
chris at a glimpse inside woodworking had a really great over garage door lumber storage rack years ago in his old workshop. might be good idea to check out. it was the best i ever saw and allowed full sheets of plywood to go in that wasted space above the garage door. and can easily be tweaked to have lights and other capabilities on it
I found the video. It actually had a light on it that was under the garage door for when he needed the door open but still light (hot in florida). it is called "Space Saving Wood Storage Solution with a Dual Purpose | A Glimpse Inside How To" by a glimpse inside. hopefully it is helpful to someone :)
Bosch saw is great, we've got two at our shop. However, one of them the bearings on the swing warms are wearing out. The big problem is that you don't realize it but your cuts start to diverge from your settings. Just a heads up. There are some videos on replacing them though. Will be trying that shortly. Best of luck on the new workshop setup! You always do amazing designs!
As someone who has a workshop smaller than a single car garage, this channel has always piqued my interest with storage ideas, so whatever you come up with I’m sure it will be amazing and thought provoking. For me, trying to figure out what tools I absolutely need and which tools are simply “taking up space” is what helps me to maintain the maximum space available for working space. Unfortunately this means (for now at least) that some options are out of my reach. ie, cabinet sawstop, outfeed/assembly table, proper materials and hardware for projects. But this forces me to figure out how to make things another way. To “think outside the box”. So please don’t stop sharing. And I’m sorry about the rolling blackouts 😢
The Bosch is brilliant. I use mine on every project. I have a cramped 2 car garage and chose it because it does go against the wall. Good luck with your new projects. With your engineering and design vision I am sure you will make it.
Very interested to see what you come up with. I have a single car garage that has to share between woodwork and yard/garden so space is premium. I think my first big woodshop purchase was my miter saw - Bosch 10" sliding compound saw. I love it. I'm fortunate to have a concrete driveway and most of my cutting and sanding is done outside to minimize the sawdust. So far most tools are on rolling stands so makes it easy to setup outside and roll back in for the night.
I have watched your chanel for some time and I enjoy how you explain things so don't change your style as I love it
The Bosch is something I'm working to. That from what I hear is the Cadillac of chop saws.
I have the Bosch miter saw and love it. I am also in a one-car garage with concrete walls (sound familiar?) so my space is at a premium, too. Thus, the Bosch’s space saving was imperative. I can’t find anything to complain about the saw, and fellow UA-camr @shopnation makes a dust collector piece for the Bosch which does a decent job. I very much enjoy your videos - cheers!
Looking forward to the new shop build. I enjoy seeing your well thought out ideas and unique approaches to your particular size restraints.
Working within your shop space and budget are the things I can relate to.
The 12" Bosch Glide is a nice saw minus the dust collection. I sold mine and bought a 10" Makita front slide saw. It is an awesome saw with great dust collection and about the same price as the Bosch (at least in the USA). Hope this helps! Good luck!
You could always look into the Bosch CM10GD, or the EU counterpart. It's a bit cheaper than the 12" and it has the zero clearance feature. Just a thought. By the way, I can't imagine how much time you spend setting up your shots. You have great vision when it comes to moving from one angle to the next. Something I will need to think about on my future videos. As always, great video and thank you.
I just bought that miter saw about 2 days ago and so far its amazing. The expanding wings were a very pleasant surprise and the sliding mechanism is smooth and feels VERY sturdy. I was on the fence buying it for a few months, but super glad I pulled the trigger.
Using your "Z axis" is crucial in small spaces. I do that myself and at almost 2 meters tall, it's easy for me to do. Mobility of things that have to be on the floor is also very helpful. I like the thought processes you're employing with the ideas for the future of your shop. Can't wait to see what you come up with. I find that the simplest solutions are the best in my own small shop.
Agreed. When you have limited square footage, you need to find ways to go up and/or down!
Bosch should sponsor you. They work with a few channels and may solve some of your power issues.
Bosch is absolutely amazing, you will wonder why you didn’t buy one already. As for over engineering, that is some the best projects you do. I can’t wait to see how you set it up!
I upgraded from a DeWalt 216mm mitre saw to the Bosch, it's a huge improvement. Definitely one for the workshop though, it's very heavy and you wouldn't want to be moving it around much. Definitely in not in and out of a van!
Keep up the good work and quality videos. Best of luck moving forward with the redesign on your workshop. I think your space-saving ideas are great solutions for those of us with smaller shops.
My workshop is also tiny at 4mx3.5m. So everything is mobile and storage is on high shelves and cupboards. As you mention, shared space is the key to organisation, so infeed and outfeed space can be used to access multiple machines. I have the Makita LS1019 sliding mitre saw which I picked up second hand. The forward facing rails and the front mounted lock knob for the tilt mechanism are so much better than anything with a rear rail system. I have it mounted on a flip cart with my planer as the balancing machine.
Love the ideas! cannot wait to see what you come up with. The only way to know if something is going to work is to do it and see!
Hello Jean. I think it is completely attainable. I have my table saw, 14" band saw, router table cabinet, lathe cabinet, drill press cabinet and two work benches all on heavy duty wheels in my single car garage workshop. Dust Collection, cabinets, storage, wall storage, wood storage are all above bench height as you noted. Before you jump into the Bosch miter saw take a look at the Makita LS1219L or LS1019L. I have seen many people comment that the Bosch (or Delta or Rigid with similar mechanisms) feel that it is not as stable/repeatable as it should be and that it deflects too easily. I have an old Porter Cable 12" non-sliding saw and have been looking at the Makitas as a replacement front runner. It uses a more traditional dual rail/rod system but is configured in a way that gives it good rear clearance.
I think a dynamic workshop in terms of using the floor space flexibly is a great idea.
Dewalt has some miter saws that work well against a wall, like the DWS770 series.
Personally, the Bosch GCM-12 was a great investment. The lower wall clearance is great if you need to get the saw right against a wall to save space like you mentioned. However, it isn't exactly zero because if you are making a miter cut, the belt housing does need some space to rotate. The saw is belt driven and has plenty of torque to cut through large, dense stock. There are three upgrades I recommend though: a larger fence for support, a zero clearance insert to prevent off cuts falling into the throat plate and help direct more saw dust to the dust boot, and an upgrade dust boot like ShopNation has engineered. There are other saws with low wall clearance. Some, like the Delta 12" Cruzer have articulating arms like the Bosch while others simply have the tube rails coming out the front instead of the rear.
I think because you have a tablesaw, either the big one or a semi-permanent contractor saw, upgrading your mitre saw may not be totally necessary. If you have to cut anything too big for your little Metabo, consider using the tablesaw, or even a circular saw.
I’m moving into a new small workshop space and I’m excited to steal your ideas!
Thank you!
I think the only reason he wants a new saw is to go to a folding-arm-style instead of the sliding-rail-style he has now. This allows you to keep them up against the wall because there aren't any rails that stick out the back.
I would like to offer my humble opinion about your video style which on the hole I personally think is great. I like that you mainly talk and explain your reasoning. I like that there is no music, I always prefer videos with the natural workshop sounds. My only very minor grip is the number of times you switch camera unnecessarily in my opinion. If you are switching from you talking to a more suitable view of the project, then that make sence, but when you switch from you talking from one direction and then you are really still talking about the same thing but from another direction, that detracts from your overall flow. But as I say, this is a very minor grip, but being more selective about your camera angles may improve your videos. As they say "less is more". Anyway keep up the good work. Looking forward to upcoming videos.
I'm looking forward to seeing what you come up with for overhead storage. I think this is the most under-utilized space and haven't seen many people try to find ways to utilize their ceiling space. I have a garage with a ceiling under 8 feet tall, so I can easily reach it. Mainly I plan to use it for clamp and lumber storage. But I also and planning storage for cans of paint and finished that just pivots down on a steel bar. Those few things along would free up a lot of wall space.
He man great info video, I live in SA had have a bunch the same tools. I started with the Metabo, and now have been using the Bosch that you are looking at, an can tell you it's a beast. It does everything better, but there are 2 down side to it, one is THERE IS NO DUST COLLECTION, and second its HEAVY. your current way of flipping up the miter saw will not work with the Bosch. then look into hose reels, you can get empty once from Adendorff, and the same with retractable leads, They are pricey but wort it, and would met you setup for videos easier . Good luck and hope you have fun with it, I know your pain. And you are doing a great job and is very entertaining.
I love the energy you bring to your channel and your content. I look forward to seeing the redesign of the shop. I'm glad you decided to keep the table saw, that was one of my favorite projects you've done. Cheers!
I love the videos as space saving / efficiency of use is important to me too. I’m super excited to see where you go with the modular workbench because it sounds like something I’ve been wanting to do as well. I have also considered mounting an electric hoist &/or pulley system in my roof to keep as much as possible stored overhead but easily accessible whenever needed, so basically figuring out how to use the “unused” space. So if you gave ideas on that, I would love to get your ideas.
Love the concept overall my only concern with linking up multiple small mobile carts together in a small shop is that variations in the floor get amplified at the bench top and you could have some unevenness in your work surface. Can’t wait to see your solution though. 👍🏼
I have the Bosch saw, and although it is space saving and has a number of advanced features, such as dado/rabbet capability, these are overshadowed by the slop in the sliding capability. There are some online videos on how to optimize the slop, but I’ve not had time yet to try them out. But for the price, I would have expected the slop to be minimal, to not noticeable. Unfortunately, this has been quite a disappointment.
The Bosch is nice, but it
is not the only "space-saving" mitre saw. What you should also consider are saws that have there sliding mechanism attached toward the User. Most famous with festools capex. But Metabo also hast a Product Line (XACT) that hast that style. As well as Makitas LS1019 and ls1219.
There are probably planty others, but the mentiond ones are a lot cheaper than the Bosch (a least where i live) and not worse in Terms of Cut accuracy and quality. But they miss the overengeneered prowed that you sometimes feel when your subconscious tray to justify your extra expanse...
I think a problem alot of people run into is trying to make a "big shop" in a small space. I like your approach. I have a 3 car garage but I use a little over 1/2 for my workshop and the rest is garage/car parking space. I have tried a few layouts to maximize workflow.
Looking forward to seeing your progress.
Creo que si, que conseguirás hacer un taller muy funcional.
Please don’t change your style. I’m eager to see how you approach your refurbishment, as I am just creating my own workshop. I would think twice about the Bosch or at least wait until you’ve finished designing your space. I’m using my table saw more and only have a small chop saw now and it’s working well so far.
Baie Mooi!
You covered this but modular, small benches that can be moved and configured. Being able to push them together or into a corner is huge. This is also a design idea that viewers are gonna love and be more interested in making themselves.
Integrating tools into benches makes it much more difficult to design for longevity. I believe you can do it but definitely keep simplicity in mind. Good bench is a solid bench.
I am sure you musty have thought of this before ?
you know best if it is possible - I built a little shed against my garage on outside - you could store your compressor in this shed and just have power and air line feeding into garage . pipe against wall with well placed outlets
will mean you plug in where you need - yet keeping some noise out of garage
I have experience with the U.S. version of the Bosch. I think it is a phenomenal machine, but as you stated, the cost difference is significant.
Your videos are great! I personally don't think you should change, but it's not my call. That's 100% up to YOU.
Ive had the bosch 11 years and its had some serious use on site and in the workshop and i can confirm its a great saw. Go for it !
I have the Bosch, and honestly it's a very good, but not excellent, saw... At least the one in the USA. There are a few quibbles, but the main thing is that the cool armature mechanism has way too much side to side play in it. For the price, i find it unacceptable, but i got mine barely used for a very good price, so bought it anyway.
If you have access to it, I'd recommend checking out the the Makita with the front facing rails. I don't own that exact model, but my rear facing rails version is much more solid than the axial glide arm, and the front rails seem to be as well.
Also, if you don't have specific need for a 12" saw, I recommend the 10" instead. My Bosch is the 12, but rarely need that capacity and the saw is big and heavy, with much more expensive blades that have more deflection in them, so they are a little less accurate. I find the 10" slider the best compromise of size, accuracy, capacity, and ongoing costs for the vast majority of users. Bigger is not always better even if you have the room, but in a small shop, much more so.
Looking forward to seeing what all you come up with!
I’m interested in seeing what you’ve got in store for this garage build, I too am having space problems, my workshop is 3x4m big and it’s PACKED,,,, after watching all your other videos I’m confident you will surprise us with you ideas, you always seem to have good ones 👍🏻 keep up the good work
Thats not a workshop thats a storage room
I have the bosch mitre saw with a smaller side work shop, Its a fantastic saw absolutely brilliant, you do save some space with it. HOWEVER the dust extraction is terrible!! I know you can get 3D printer plans to make an new dust extractor that will make it a thousand times better, however I do not own a 3D printer so have learned to deal with it.
I don’t think there are many better UA-camrs to imagine and design clever solutions to suit small spaces.
Considering the electrical situation in RSA, would you ever use solar panels and a battery system to allow you to work when the power is off?
That is the system I have in place but it's not strong enough for the saw.
I don't own the Bosch GCM-12, but I have used it.
Comparing its features to my current miter saw, which is a DeWalt, I have to say the biggest advantage is the zero-wall clearance.
Keep in mind, it has a smaller footprint as well, since there are no sliding arms swinging on the back either.
And the better dust collection.
(I built a box around mine to combat the dust a miter saw tends to generate...which of course added to the clearance needed)
And the smoother operation.
(the DeWalt is great, but the Bosch requres a lot less effort to operate)
And the more solid depth stop.
(not sure how often you use this, but I use mine all the time and it's...I'll just call it bouncy)
Plus, something that likely doesn't affect you but still...no mixed SAE/metric parts. DeWalt does that on their American models.
(I prefer metric because it's sane, but either way, a single system is always preferred)
Overall, I'd say that were I able to afford it, I'd upgrade to the Bosch myself.
You really don't need a cross cut saw in a small workshop. Use the table saw instead. What's the available floor area you got?
Whenever I look for videos of "small shop" I mainly see videos where people have spaces around 20x20 feet or larger for their so-called small shop. I can't find much on truly small shop ideas. You have been one of the fee that offers true small shop innovations.
My only request would be to make more content. I enjoy every video you post because everything you do is so well thought out and explained.
You always have fantastic content and brilliant ideas on how to approach projects. Keep it up!
Regarding the miter saw I have the Bosch saw (for several years) and I love it. The flat against the wall feature is great, but besides that it is rock solid and extremely accurate, and while no miter saw has great dust collection there are aftermarket add-ons that work very well. For a small shop the Bosch mechanism can’t be beat.
Hi Jean, I have the Bosch saw here in the UK and find it to be generally an excellent tool but with some reservations. Firstly the zero clearance at the rear of the saw isn't truly zero as the motor requires space when swinging for mitre cuts. Not a major issue but you will need to take that into consideration when designing your new bench. Additionally the glide mechanism is great but can flex a bit if you're too rough with it, which can create issues with accuracy especially if using the (very) basic trenching facility it comes with. The dust collection is terrible, I know that can be said about almost all mitre saws but the Bosch is really bad. Shop Nation (www.youtube.com/@ShopNation) make a great upgrade for the dust collection but this isn't perfect by any means. You'll need to upgrade the clearance plate to a zero clearance one as the gap in the factory one is huge, almost cavernous. You'll also need to beef up the new bench as the Bosch is a real chunky monkey. Good luck with all the changes, we'll all be watching closely to grab some great tips along the way I'm sure.
Thanks! You have given me some stuff to think about.
I like seeing the results of finished projects first, and then watching how the maker produces them. This way I'm not distracted by trying to figure out what is being built. Whether you choose this path or not, I will still enjoy watching your videos. Cheers.
Agree. Seeing the finished product first helps understanding the build process.
Used the Bosch, Makita and Fesstool zero clearance mitersaws. Festool is probably the best but honestly I prefer the Makita, just feels better. And about 1/2 the cost. The Bosch we had nothing but problems with. The joints become sloppy rather quickly loosing its accuracy. Had it replaced once, and that one repaired once before selling it off and getting the Makita, which was flawless. If not needing the big 10 or 12 inch blade you can also get the Makita in 7 1/2” (190mm?) blade in cordless for about the cost of the Bosch. And help with power issues that way? Just a thought.
I have the Hikoki Mitre Saw and it's a great saw, i used to have the same saw as you have the Metabo but like you i wanted it against the wall, the Bosch saw looks great but a great price comes with it so i looked around and found the Hikoki Mitre Saw, and this one has glide bars but they are at the front so it's much better to push up against the wall.
I think it's a cracking Mitre Saw and i wouldn't swop it for the Bosch that's how good i rate it, there are of course different prices, for starters i'm in the UK and also there are the different Blade Sizes and the price now might be slightly different, mine is two years old and i have not had one problem with it mine is the HIKOKI C8FSHG 1100W 216MM SLIDE COMPOUND MITRE SAW the cost was £156.67 but including VAT was £188.00 i hope this helps.
Take Care and Stay Safe,
Barry (UK) 👍
Hi Jean, can't help with your mitre saw choice but keep going the way you have and your final design and builds will come out brilliantly I'm sure.
Your ideas and vision are great, as are your attention to detail and execution, so believe in yourself and keep trooping on.
Hope all is well with you and your family (that's where your time goes! 😉) and good luck. 👍
Good luck also for a couple of weeks time from an English man!
🏉🇿🇦🏉 (🏴🙄😅)
I would say its hugely overengineering. HOWEVER, how fun is it to overengineer and geek out on it? Go for it! I subscribed and I am looking forward to it!
If you like your Metabo saw and your only problem is that you can't push it all the way back to the wall, the "Metabo KGSV 72 XACT" or the "Metabo KGSV 72 XACT SYM" might be worth considering. I use the latter one and am absolutely happy with it. However, it has a smaller blade than the Bosch.
Thanks for keeping it interserting and raising expectations for new ideas... should be fun to watch! Have fun with it, stay focused on "why you do what you do" more than, "what you do"... Even amongst the ever changing whims of the utube algorithms! They are becoming more antagonistic and controlling toward you all... Personally, I couldn't work for them! utube givith and utube taketh away!
Check out the Wen M1215 12” miter saw. I personally have one, and love it. The motor actually rides on the rails, rather than being fixed to them. This feature also allows for zero wall clearance. The major difference is that it’s significantly cheaper than the Bosch you’re looking at. Wen is one of the companies responsible for the creation of power tools, and has been around since 1951.
I feel compelled to give an opposing opinion re the Bosch mitre saw. I replaced a fixed-head Dewalt saw about two years ago….and initially I REALLY REALLY REALLY wanted the Bosch saw, for the obvious reasons. I began looking at UA-cam reviews and came across several users who were very disappointed with the accuracy of the cuts. One in particular was very comprehensive, with him showing video of his zero clearance throat after a period of use. Right up against the fence the cut was probably good enough, but at the extended end of the cut it was all over the place. He also outlined his attempt to have Bosch look at his saw, and that was pointless….they required him to pay for two-way shipping, the cost of which was prohibitive. I still wanted this saw to work for me…the visual appearance of the engineering impressed the hell out of me. I visited two different tool dealerships and examined their display models. On both occasion the left-right flex, when the saw was at full extension, was completely unacceptable. Of note….it didn’t take much force to make it flex…I completely understood what the previously mentioned reviewer was dealing with, and so much for the “appearance” of clever engineering. The good news is that it’s easy to determine if what I’m saying is still valid…just give it the flex test….👍🏼
My Miter saw for against the wall is the 10” Makita. I did have trouble with the saw as soon as it came out of the box. There was wobble in either the bearings or the arbor shaft ? Makita stood behind the saw and its a WONDERFUL saw now. Good luck , shop space is a HUGE puzzle and constant challenge.
For a space savings and cost savings. Not to mention saving my back when I move it around. I went with a non sliding 12” dewalt miter saw. I’ve rarely come up with something it doesn’t have the capacity to cut. If it’s over 10” wide I just grab my short track with the track square and my track saw to cut it. I’m very interested in your new shop design. Looking forward to stealing some of your ideas. Love that tool cabinet!
I love thé ambition.
I am thinking along similar lines for modular workbenches using ideas from yourself, Paoson Woodworking, Hooked on Wood and Rings Workshop.
Pretty ambitious to have a mobile workshop. A 3 or 4 part workbench is a very good idea. Do that. If you're using 1 fase electrics you can make a retractable suspended power plug from the ceiling.
Please take a look at Makita Miter Saw options........they have the same space saving offering with.......in my opinion the best dust collection set up. Whatever you do, I wish you much fun in all that is ahead of you!
Even in a larger workshop there's never enough space to work on large things without clashing with other kit. I had also concluded that mobile benches makes sense. However, I don't have your skills or determination, Jean, so I'm planning to use multiple individual ruggedised kitchen units with melamine worktops. The power tools will be simply fixed one to each bench and then they can be wheeled into the required positions. Hopefully, I can arrange some clipping mechanism to lock units together to create larger, more stable surfaces.
I'm looking forward to seeing how to do it properly, Jean!
Jean, maybe for overhead storage, small motor and pulley systems could be used.
Bring the storage down to you, instead of climbing up to it. With the proper design, you
can lift a good load, with a relatively small motor. I may be slow, but it is all about space. 😁✌🖖
My two cents: I'd focus on productivity (video-productivity that is) rather than spending too much time on editing quality. I guess publishing more regularly would benefit the traction of the channel better and that could generate more revenue that you could use to maybe hand over editing jobs to an external party. About the shop itself: modular is probably the way to go but make sure changing the layout doesn't take too much time, or you won't use it as intended, but you'd probably figured that out already...
The Metabo C12RSH2 or C12RSH2(S) also has the ability to bump it directly against the wall because the sliding portion is fixed to the back and it slides forward. and at least near me is a couple hundred dollars cheaper. The only thing I wish the Metabo has which it does not is the shadow line instead of the laser for lining up cuts.
Hello, what an awesome and inspiring channel you babe! Found you because I'm just putting together my own first workshop in a single car garage. Only difference is that it also needs to operate as a bike workshop as well so I'm setting up an area for that and storing the bikes as well... I'm certain many of your ideas would find their way to my shop c eventually so thank you!! Definitely subscribed after watching you build that smart tool cabinet for the wall!
Not sure if you've bought a new Miter Saw yet... but Metabo also makes a "zero wall clearance" saw: Metabo HPT C12RSH2S Sliding Compound Miter Saw, and is about half the price as the Bosch GCM.
Well, it wouldn't let me post a link.... but it's on sale now on Amazon.
Instead of the complicated bosch saw, look at the makita LS1219L instead. Love mine.
I think you should define how the shop will be used. What types of projects will typically be performed? Home renovations require different things than furniture making, for example. I think if you are aiming for a shop that does it all, you will end up with one that does nothing well
I have been to SA many times to hunt. It was sad when I came last year and was told of the rolling blackouts. My PH had spent quite a few Rand to get a fully functional solar array and battery system because of these problematic blackouts. I have nothing but the kindest wishes for those in SA dealing with poor management of the power companies.
Good job Juan, good job. Keep doing what you're doing. I am anxious to see your wood storage solution. That is currently the biggest pain in my one garage shop...
I carefully planned every inch of my garage to maximise use and made things mobile where I could. I've always thought you did things right with that table but as soon as I started seeing too many storage units on walls I think that's probably where things went a little tight/crowded. Your new ideas seem to make sense and really looking forward to your modular table(s) idea as that sounds way more versatile and adaptable as you say. The fact you are pointing in a direction at this stage with determination already tells me you're doing things right and I'm already confident I'm going to enjoy the videos.
I don't know if you follow @Tested but take a look at some of the carts that Adam Savage has made. He makes use of a lot of mobile carts. His workshop might be bigger than yours, but some of his philosophy might be helpful to you.
The Bosch is a good saw, but a dust monster. Just have a search on UA-cam on how many people tried to get it under control, most failed.
The Makita shares a similar price point with similar features, but a lot cleaner and then there is Festool.
Never had one but if I could I would get a festool mitre saw, I watch Jon peters in the USA who is a professional carpenter who had the bosh but decided to change as the bosh kept misaligning
A dynamic workshop is a necessity for you given your space constraints. However, how will you ensure that the benches are level with one another when you move them around? Having to level them each time you change the configuration will be too much of a time suck. Is there some way you can ensure that the floor of your workshop is level?
Love my Bosch Glide 12, it’s an amazing saw. There are even some sellers that have a custom dust boot to improve the dust collection at the blade.
Go for the shop upgrade. But, there is always a but, don't fall in love with an idea, because it's cool. Think practicality one all else.
I have the Bosch saw and it's amazing. Very much worth the price, even for the weekend warrior.
I like the Ideas you always come up with to maximise the space you have, did you ever think do mount the mitre saw (which you probably not use soooo often as you think now) on the wall on a slitting system? bring her down when you need and back up when you don't
Is this really a whole seven minutes of talking about stuff you plan on doing when you have time?
I've got the Bosch saw and I like it but it still takes up a lot of space as it's a bloody big unit and has power to spare.The only down side of it is the extraction system(it's no where near as good as my son's dewalt.Hope this helps