From the owner of the last, old, riveted boat that Matt ever does - Thanks for all the TLC that went into this build! Could not be happier… I’ll eventually be adding LiveScope with one of the foot pedal systems, probably one of the livescan options? Hoping that there might be better tech by that point AND that Garmin will figure out a way to transmit LS wirelessly to the new 106SV graph that I purchased. As of now, only the built in transducer can achieve this. For the back, simple iPad or iPhone mount should do the trick bc the new graph (maybe even the old one? ) is capable of sending a mirrored image to a smart phone or tablet, etc. Anyway, enough geeking out, just wanted to say thanks!
Nice work brother! I wasn’t sure i would like the white, but it won me over for sure. Didn’t mind the long form video, but I personally prefer a build series where you can get a little more in-depth on a particular item you want to highlight. I’m going to watch either way,. Again, excellent work, really like the old school look on the exterior of the boat. Appreciate you!
Thanks Mark. I have a feeling this longer video will do good over time but I like the 20 min videos. The build series are literally playlist available on the channel. It's way easier to edit , and I can drop videos twice a week. I appreciate you watching, and the feedback!
I like the long videos. Big fan of yours. Serious talent and pride in your work. Traits of a hard working American. Don’t see that these days. Keep up the good projects.
Great video and another great build. I like the shorter videos, but I know splitting them up takes time. Do what you do man and just keep dropping amazing content and amazing builds!
Well where to start it’s like watching a movie when you do the whole build at once it was OK I like it the other way also in a series as far as the boat goes I expected nothing less than what this turned out to be what an awesome build nice job beautiful work went into this old boat nice job
Yep still watching was watching another one of your videos came in late to your live but I’m here and I definitely would not do another old riveted boat stick to your guns
I had this problem with some turf but it was due to the direction I had it facing. Turning it 180 changed the way the light hit it and it matched a bit more.
Me either. Matt, did you see the rendering I sent you? PAINT THIS 2-TONE but model it after traditional Flats boats! Pastel Blue or Seafood with a Bright White Interior with those white hatches! Screw the Seadeck!, Just mask off areas and hit it with Non Skid Paint in white and then spray the entire thing white and then paint the outline of the Non Skid the same pastel blue! then make sure the motor is WHITE and possibly 2-tone as well!
Dude you made chicken salad out of chicken poop !!! I don't know where you are located but if you were close to where I live I would get you to do some work for me.
Brother! Get yourself a $30 gun from Harbor Freight and buy some 2-part epoxy PPG Paint and do all your boats using that stuff and system and you won't have runs and the finish will be professionally glossy & smoooooth!
i think your wrong about the old boats might hurt your Rep/Brand,,,,, i really beleive just about any rum dumb can make a new boat look good ..... but it take a master to take one that need extra tlc look that good and function properly..... plus it gives others with low budgets hope that theirs can come out that good
From the owner of the last, old, riveted boat that Matt ever does - Thanks for all the TLC that went into this build! Could not be happier… I’ll eventually be adding LiveScope with one of the foot pedal systems, probably one of the livescan options? Hoping that there might be better tech by that point AND that Garmin will figure out a way to transmit LS wirelessly to the new 106SV graph that I purchased. As of now, only the built in transducer can achieve this. For the back, simple iPad or iPhone mount should do the trick bc the new graph (maybe even the old one? ) is capable of sending a mirrored image to a smart phone or tablet, etc. Anyway, enough geeking out, just wanted to say thanks!
Thanks, brotha! Definitely some cool electronics for you to play with!
Can’t wait for this build!!!
I'm just glad it's done so I can focus on the Yinny Tinny!
love you putting TBN on blast. The guy is a goober with a rivet gun.
Hahaha Gotta keep it 💯
The longer kids are great!!
Long kids?? 😆 🤣 😂. Longer vids! I got it. They are extremely hard to edit, but ill see what I can do. I appreciate the feedback!
Brilliant Job 👍more long ones for sure🎣😊✌️
Thanks for sharing
I also LOVE the white paint and lights inside the hatches, man did it make that boat look clean?
Thanks brotha
Nice work brother! I wasn’t sure i would like the white, but it won me over for sure. Didn’t mind the long form video, but I personally prefer a build series where you can get a little more in-depth on a particular item you want to highlight. I’m going to watch either way,. Again, excellent work, really like the old school look on the exterior of the boat. Appreciate you!
Thanks Mark. I have a feeling this longer video will do good over time but I like the 20 min videos. The build series are literally playlist available on the channel. It's way easier to edit , and I can drop videos twice a week. I appreciate you watching, and the feedback!
Long or short, the builds with the journey and end results.....💯💥!!
Thanks brotha
I see your paintn is getn better
Hahaha thanks brotha. I really hate painting. I'll give it to you. You are good at it.
Thanks.
I like the long videos. Big fan of yours. Serious talent and pride in your work. Traits of a hard working American. Don’t see that these days. Keep up the good projects.
Thanks brotha
Crazy sick,amazing build on an ancient boat.
Thanks brotha
I will still watch either way, long or short form.
Thanks brotha
Great video and another great build. I like the shorter videos, but I know splitting them up takes time. Do what you do man and just keep dropping amazing content and amazing builds!
Thanks brotha. Short videos are way easier to edit
Dope bro 😮
Thanks brotha
Yo you are a boat guru and it's dope you got your video's playing on your tv!! Awsome work like always !!
Hahaha thanks brotha. Sometimes I need some self motivation
Well where to start it’s like watching a movie when you do the whole build at once it was OK I like it the other way also in a series as far as the boat goes I expected nothing less than what this turned out to be what an awesome build nice job beautiful work went into this old boat nice job
Thanks brotha. I'm not sure on the longer videos. We'll see how it does. Its a lot of editing. It took about 4 hours to edit this video.
This boat is rad!!
Thanks brotha
You are a genius!
Thanks Bob!
Nicely done.
Thanks brotha
Yep still watching was watching another one of your videos came in late to your live but I’m here and I definitely would not do another old riveted boat stick to your guns
Appreciate it brotha!
I had this problem with some turf but it was due to the direction I had it facing. Turning it 180 changed the way the light hit it and it matched a bit more.
Yeah it is directional for sure
Man what a SWEET RIG.
What’s the going to power it with?
I'm not sure probably 20 hp. It should run mid 20s
Long video. But YOU GOT SHIT DONE!!!💪🏼 RESPECT
Thanks brotha!
Are they going to run the graphs off of the trolling motor transducer???
Correct both graphs run from the built in transducer
I would want to run at least one off of a fixed transducer. But that's me.
Me either. Matt, did you see the rendering I sent you?
PAINT THIS 2-TONE but model it after traditional Flats boats! Pastel Blue or Seafood with a Bright White Interior with those white hatches! Screw the Seadeck!, Just mask off areas and hit it with Non Skid Paint in white and then spray the entire thing white and then paint the outline of the Non Skid the same pastel blue! then make sure the motor is WHITE and possibly 2-tone as well!
Yes thanks
Dude you made chicken salad out of chicken poop !!! I don't know where you are located but if you were close to where I live I would get you to do some work for me.
Lol thanks brotha! Virginia Beach
Brother! Get yourself a $30 gun from Harbor Freight and buy some 2-part epoxy PPG Paint and do all your boats using that stuff and system and you won't have runs and the finish will be professionally glossy & smoooooth!
I have a couple. I just hate cleaning them
is there a beef between you and tbn?
Something like that lol. That's a story for another day...
@@TRICKEDTINS i like stories...
i think your wrong about the old boats might hurt your Rep/Brand,,,,, i really beleive just about any rum dumb can make a new boat look good ..... but it take a master to take one that need extra tlc look that good and function properly..... plus it gives others with low budgets hope that theirs can come out that good
Maybe if it was welded. A welded hull this size is less than 3k. If your going 20k into it, buy a damn new welded hull 😆