Це відео не доступне.
Перепрошуємо.
We Tuned our 4 Cylinder Military Go Kart and IT RIPS!
Вставка
- Опубліковано 31 жов 2023
- Thanks for Watching!
Facebook: goo.gl/VR6mh2
Instagram: goo.gl/PqOIo3
2023 GPS 180 race ticket: bit.ly/3smsUl1
Live axle kit for 6” wheels: bit.ly/3Qq1fXJ
VM 22 Mikuni carburetor performance kit: bit.ly/37iOoEG
Sprocket hub 1” axle: bit.ly/3aRYUlq
420 split sprockets: bit.ly/3kFMeRx
Heavy duty brake cable: bit.ly/2ZzU5Fc
Mechanical disc brake kit: bit.ly/3gx4URO
Go Power Sports: bit.ly/3QKyODE
Get $100 off any Langmuir Systems Crossfire CNC plasma table using this link, or use code CARSANDCAMERAS at checkout: store.langmuirs...
Join the CarsandCameras Pit Crew: / @carsandcameras
Subscribe to our PODCAST channel: / @atthewheelwithcarsand...
NEW MERCH: www.cars-camera...
Equipment we use: www.amazon.com...
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. CARS AND CAMERAS, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL CARSANDCAMERAS CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
Cars and Cameras makes no representation about the sufficiency of any safety precautions and equipment used in this video.
We’re a little early, but shoutout to all of the veterans of the US Armed Forces- thank you for your dedication and sacrifice to protecting this great country. Hope y’all enjoy this one! It’s a sweet setup😁
It needs a turbo
As a veteran, you should let me send this thing!
2 more of them, sweet.
@@zacharybrown9288twin turbo.
I have a feeling the cylinders that don't get a straight shot on the new intakes will be down on power compared to the the ones with the straight runners, it's a pretty abrupt turn and you should have made an intake where all 4 have equal length and geometry runners to a single intake chamber fed by both carbs.
a fully built, port/polished, turbo version of one of those engines would be amazing.
put on a gocart with suspension would be even cooler
@@1NIGHTMAREGAMERi think it would have to be on something with suspension! Otherwise it would end up like the dukarti
Comment so c&c see
❤
Put it on the midget please with a turbo
I love these "when the cat's away, the mice will play" type videos. Great job guys!
John boy could mess up a wet dream. He's best out of the shop.
The inmates are running the asylum!
Man you guys have changed my life, it's so much better now, running around on minibikes and fixing them of course lol. It also keeps me sober. Long story but you guys make an old man smile.
Congratulations on your sobriety!
Good for you bud💯 if ain't nobody told you thier proud of you then I WILL, proud of you bud👊 one day at a time and we will succeed 👍
@@robertbailey2342 my Dads name is Robert Bailey, how cool
I swear, you guys are just getting crazier and crazier with these projects.
I'm glad you guys are diversifying from 212 and 225 builds.
4A032 is a great little engine. it's big brother, the 4A084, (84 Cubic Inches vs the 32 Cubic Inch displacement) is another engine you should be developing. We modded some of them and put them on home built aircraft. Great engines.
I've got the 2A042 from the mule running direct to a 54in pusher prop never goes over 2800rpm on a trike. But I've got one of these for a boat idea.After coming across a jet boat with this little 4cyl. Military tough from the 50s
Run a balance tube between the 2 intake manifolds. That will help balance things out and smooth the idle.
Yeah I'm sure that vacuum is not equal in all four cylinders because of the unequal length runners
Like they did on the cross-ram on early 60s Mopar 413/426 wedge!
the difference in performance of this thing is mind blowing, also to think that with a few minimalistic mods in the long-run, you could get that yard cart to go much faster than it should ever be able to go, thats hotroddin' right there boys, i hope this thing gets featured again/more this thing is ridiculously awesome, a few bugs to iron out, and she'll be more of a ripper, also i agree with another commenter, a fully built and turboed version of this engine would be Epic
Since it is a 4 cylinder you could fuel inject it with something like a fuel tech or Holley injection system or build a intake for a single barrel carb for a car. Both of those would give you way more fuel and hopefully be easier to tune.
I was thinking the same thing
Hi Ike I have 14 of the 4cyl engines, and 10 2cyl.These engines are way ahead of their time.
You have some 042's? Cool. Had 084 once.
Lets put one in a truck
Where can I get one?
That mini VW needs a BAJA stinger exhaust .👍👍👍
This would sound amazing I agree
Love the odd ball projects like this.♥️ That thing is awesome and it's a ripper!
Small engines were huge back then.
Please try a supercharger on your next military engine, great videos!!
Guys I have one of those motors I will donate to the cause. It would be the ideal candidate for the experimental porting and polishing. It hasn't run but the last I knew, and I KNOW, it has a hot magneto on it. It might be a few weeks but I should be able to meet up someplace.
This will save carving on the new engines until you have seen what you are getting into.
Cheers
Terry
Did u ever get rid of the engine?
the torque on that little thing is pretty beasty. it just grunts so well. cant wait to see it fine tuned! its gonna fly!
So looking forward to military engine build, I can see so much power
more please ! ! ! got my 130 MPH t-shirt the other day its so cool, USAF E-7 retired Vietnam vet as well.
🫡
That thing was flying! Look like lots of fun, good job guys
your custom intake manifolds remind me a lot of those old dodge long ram intakes, so sick.
I love the paint job! Please put Ropkeys Raiders on the front in tribute to my late great friend Fred Ropkey.
Another awesome video 👍. Always looking forward to Wednesday and your videos. This Old Man from Washington NC loves you guys 🛵🧔💝💝💝
Nice! this is a cool engine. Great content as always gentlemen!👌
Would be a damn shame if you had to get a custom cam,oversize valves and forged lifters and pushrods with a forged rod and flywheel, maybe try out a turbo and efi......
You guys should add a small engine dyno to the shop. That would be a cool project to watch.
1:00 You had me at "Duck and Cover!". Cheers from Australia.
Those engines are definitely cool. Im looking foward to more content with those.
I want to see how far you can take this military go cart (and with that frame, you could always make an exo cage like one of the military fast attack buggies) so please do another video with this , would love to see a whole series!
Love the military cart, how bout putting uniform stars or stripes on the very front and call it THE SERGEANT 😁
If you get that engine running clean. I think you might be able to knock 3 more seconds off those lap times.
Nice job boys!!!! Way to think outside the box.
Thumbs up indeed. I have been looking forward to this thing running on 4 cylinders since episode 1.
Ike, on your racing version aka "4A032-Type R" imagine this beast with 4 carbs on long cross-ram intake runners, 4 into one tuned stinger exhaust (so I can hear it running in AZ) AND most important of all ... *MORE THAN 6:1 COMPRESSION RATIO* . The insane potential of this engine needs released! I think the cam sounds fine for three times the power it makes now.
Oh, and a REAL clutch that can handle the power.
Thanks for making my day on a very rough week for me.
What? I didn't say anything about a third dragster ... but that is a good idea!
That engine has a lot of aircraft engine characteristics like the spark plugs and the push rod tubes on top. Crazy keep up the great work and awesome entertainment
I don't know for sure but I'd be willing to bet that this engine has a good amount of torque it might be cool to make a 4 wheel drive low geared articulated rock crawler with it if yall want to tackle a big ground up project again lol! Great video as always, love watchin yall!
This has been an interesting build. I think this engine has enormous potential to make stupid power. I agree that, turbo'd or not, it may be a very interesting option for the King Midget....if you can find enough airflow in there to cool it.
You guys have come a long way since I started watching. Oh yeah,...Charles is a great addition. And,...my wife loves the show.
Need to bring back the cross kart, that was one of my favorite builds ever.
A 4 cylinder rated at 6 hp seems crazy but at that power level they were probably bulletproof. Oh yeh, happy Vets day to everyone and especially those that served. 🐾✌️🇺🇸
This thing sounds amazing
Yall need to buy my action industries Porsche 962 Le mans fiberglass body go kart
It would be better suited with yall
Put that motor on a better frame with good suspension. How about the Crosscart you haven't fixed yet? With a snowmobile torque convertor set up.
This type of video is the best. Bent axle? It'll be fine. Clogged carb? It'll be fine. Brakes? It'll be fine.
Yes to more MilCart! Looking forward to your efforts on the other 4cyl motor, Isaac! It had to be green and no other shade would do! Lotsa possibilities!!
She has more in her!! Exhaust Setup! Better Clutch Setup, Electric Fuel Pump , Larger Tank And NEW Larger Tires!
Yes, more of this build… like adding suspension and loosening the fram filter…😂
Great job! I think you guys should turn it into a Camo paint job though. Add some dark green, brown & black patterns.
A gold wing style 4 carb manifold would probably work wonders. Or maybe two tiny two barrel carbs on equal length manifolds. Could be a monster with that alone, but would be insanely effective with a good port job, and shaving the heads if possible
guys, the sheet metal is pretty important on that engine, it route the air through the jug fins for cooling. for anything other than few minutes of running at the time at full power (and more) you should put it back to prevent overheating. I am also looking forward to see how much juice you can squeeze out of that engine. Go Nuts!
Kinda like the Cross-ram they used on the 413 Chrysler lol. Very cool.
This may be my new favorite go-kart. That thing is a beast! Can't wait to see what else you can get out of it.
That sucker turned out awesome, I think it’s got top 3 potential maybe even #1 , the army helmet at the end was funny 👍🏼
Charles and Ike shouldn’t be left unsupervised 😂😂, excellent video boys!!
I love the Build, you guys should paint U.S.A. on the front and put a number on it like the old military jeeps
Need to name this build Patton. You should do a fat boy mini bike with that engine. Also you might want to repack your middle lift cylinder and replace the check valve in it. It shouldn’t be miss staging like that. The carriage should be to the top of the mast before it starts going to the second stage.
Oh, yeah… I always love it when you guy fabricate some MAJOR component, (twin, cross-fire-intake) and “let’s see what happens”! Absolutely love “outside the box” thinking. Great video.
Love the "military cart," but PLEASE build one of those motors to take a moon tune and slap it in a suspension cart!
Always good when you get off work to a post
Sounds like a hot rod dune buggy of the 60's! This old man is impressed. I need a go-kart, a fast one. Paint it a very LOUD color, anti-military.
25:49 Cars and Cameras be cooking 😂😂
Bunch of grown kids living the dream! This is sooo cool 😎
I think this project is BEGGING to see it’s top speed potential. Gears, turbo, etc!!! That engine is a torque monster. Gear it to the moon and see what the CVT can make it do!
It would be so cool if you guys made a clutch with a pressure plate and throw bearing so you could do clutch drop burnouts...
What you've got to do is tune the carbs to the intakes that you've built. Put a vacume port in each of your intakes, then hook up a inline vacume gauge setup, one that tests the overall indipendant vacume to each of your carbs... I'll bet you that one of them is more open, if you will, than the other .. then all you have to do is adjust your cables to be at the same intake vacume as each other's .... And then tune the carbs to the engine by turning your air fuel ports
the Paint job.... LOVE IT!!!😲
That was SWEET ! AND I'm thinking like you theres more power to unlock here ! Can't wait for the next Vidio !
Love the paint job! On you next HP military motor build. Look into having someone 3D print you a 4 into one using a center plenum that would mount a two barrel down draft automobile carb. Do all your intake and exhaust porting, then port match the intake. On the exhaust side build an equal length 4 into 1 header. This looks to be a low RPM motor so go with smaller pipe that's a bit longer, it will help with low end torque. The biggest gain will be with building cylinder pressure, so mill the heads and reduce the area over the piston.
More videos on military hopups could be badass
Great job, guys. I wanted to suggest that if you could make a t-shirt that says "it's only bad if you look at it!", which is something that Charles said in a video when he first joined the channel. It was so funny. I would buy the shirt if you were to make it. Keep up the great work, guys.
Definitely want to see this kart again, it hasn't reached its peak just yet!
0:24 * said in hank hill voice * " God dang it Johnny " 😂
I like this cart. I would like to see yall revisit this with a chain tensioner and a proper send. Good job guys
Hell yeah! So glad you guys did this
Nice! I think that you need some seat bolsters, some suspension and maybe lengthen the frame a couple of feet, and voila! you'll have a competitor for the trophy cart!
We love the engine, like a cute little vw, Superbad in the military go kart, so glad it rips (needs suspension!)
Fine, fine work fellers ! Its easy to see the potential in that BEAST. Imagine what suspension on it would do. You boys spent a lot of time in the air from what I could see. Yes it is early, but any day is a good day to say THANKS to our vets from the bottom of my heart.More vids on this BEAST please....
Please try and make a hood so it looks like a mini willys jeep.
I love this so much, awesome project yall. Keep it up.
Hi guys love the machine.. I think you should call this project Sgt. Murray maybe.
i feel like ITB's would have been so much less work as far as piping goes.
and it would sound awesome.
Back in the late 80's me my dad and grandfather bought 20 of those engines. 5 were turned into experimental aircraft engines. The test mule was a home built gokart. And 10 were pure spare parts. The last 5 were left stock. It was a blast and ran great. We used a single 38mm carb and made zoomies with a muffler on each. Did some port and polish as well as a minor shave to bump up compression. We also did turbo and superchargers but never dyno time,just seat of the pants vs shifter karts.
Always love yalls builds. I'd love to see yall go back to your roots a bit tho. All new parts but like tractor supply and harbor freight parts only. Budget build but nothing used and no fancy go power sports stuff
Definitely a great project! I’m down for more! 👍 ❤
I loved the military go kart, and I want to see more hot laps. Whatever you do, I always want to see more hot laps of your builds.
You guys should put that engine in one of those mini jeeps! That would be awesome!
This is a pretty awesome video! Really amazed with the difference of what you did made to this motor! and I would love to see one of these motors built to the gills! I think these motors have a lot of potential, great work though guys can’t wait to see what you do👍🏼🤩🫡❤️
That looks like a fun ride and cool factor off the charts. Turbo it and smooth the ride up with some suspension and it will move up another slot or more on the board.
Have you guys thought about doing some water vids? A good kayak with a jet engine engineered into it would peak the interest of many.
You guys put out an amazing amount of content. Recently started binging ur channel and im really floored by the variety of projects yall tackle. Very impressive
Great video guys.....that cart cooks !!!!..... great job !!
One of those engines would be a great power plant for the King Midget. Beef up the suspension and steering and you would have a fun cruiser.
hell yeah brother! this thing deserves a torque coverter and potential a supercharger! would love to see it. LOVE YOU GUYS!❤
Tim the tool man Tailer says “More Power” “UGH UGH!!!” Lol😂
The mini car is a prime vehicle for one of those engines
do you guys have a press? put the axle in the lathe and mark the high spot and then give it a squeeze. even in the pipe bender it might be enough just to straighten it out so its not so bad.
also, bolt two of these engines inline for a flat 8 👍
Noticed it uses aviation spark plugs...give them a good cleaning and maybe that will help with throttle response.
Makes sense if it was built by Continental
One of your best episodes and builds! 👍👍 Maybe John should take a break more often. Just kidding! 😁
Ike with the helmet on driving the kart is the funniest damn thing i've seen all day.
Yes absolutely, please. That is so cool man. I love it. Thanks Ray
Charles, "no big deal." Impressive sounding and performance.
I must admit that the engine is a beast. I'm not sure how well it is going to stay cool with the tin shields missing. If it becomes an issue, you guys are awesome enough to correct the problem. Your combined fab skills are great. See you in the next one.
Nothing like a badass yard kart! I think you guys should continue to improve this kart, engine and all. To see just how far you can go up the leader board! Paint looks great btw!
I really like the way that little engine sounds!