Ram Regulator 2010 2011 2012 2013 2014 2015 2016 2017 2018
Вставка
- Опубліковано 5 вер 2024
- This is how to take apart a window regulator on the ram truck series from 2010-2018. This is the same for from and rear. You need a 10mm socket, 5 mm socket, T25 and T30 sockets, a small flathead screw driver, tape or wedge to hold glass up, and about an hour of time to get it done.
Do you know the name of the part that connects the latch to the window regulator. It’s the black piece that the latch slides into that connects to the regulator. I snapped it while removing it and can’t seem to find that part
Step one. Take the key out of the ignition. Damn
Andrew, I need an honest opinion. Rear passenger window stopped working. On the window track the motor moves a cable across a curved plastic piece where really it should be a grooved wheel, there is one at each end of the vertical window track. And the top one cracked in half. Do they sell just the replacement curved plastic pieces?? Or got to get the whole panel? Cables got crimped up a little also, so they dont sit too well on the take up spool..better to replace all of it?
Good to know
Nice to know mechanics are using metal pry tools on soft plastic interior parts. Hate to see how many scratches are in the panels when you are done.
None:)
😂😂😂 Are you fucking kidding me..
Is there a part 2 for installation
what are the red clips holding the rods in place called? I broke mine trying to do this.
Auto zone or oreillys will have them for sure just take the one you broke so you can match it up.
Why couldn’t you just change the window regulator parts
Looks like a fking nightmare
So is the 2010 Regulator the same as the 2012 for a Ram ?
Yes it is
Thank you