The best tutorial that I have seen. I would absolutely love to see you do a tutorial on a 19.5 24 backhoe tire. You all make this look so easy, but I can tell you from first hand experience, they will kick your ass if you don’t know exactly what to do. Thanks for your detailed explanation.
Great tutorial video! I changed car and motorcycle tires before, but bought some heavy duty tire irons to change my rear John Deere Tractor tire. This video is a great basic how-to for big tires. Thanks!
I'm23 and a tire man myself I grew up around the tire business my whole life and I've watched about every tire changing video on UA-cam (just BC)and yours are the best... there are a few things we do differently for example on a 10.00 20 in stead of putting the tire on the rim on the ground I lean the tire against my truck and put the rim in the tire and let it all down then put on the ring... As far as the "golden tool" or whatever I've had big companies call me out BC they couldn't change the tire with that thing and seen guys bust a$$ using that thing taking 2-3hrs on 1 tire.... I'll take my tire irons over anything that any day witch brings me to next point I have 2 "curved mounting" bars that I use but 1 of them I ground the lil lip for dismounting the inner bead off the rim so it's like a "spoon bar" but with a lil more leverage BC its longer then a reg spoon bar and if you need that other end it's already right there... also if I'm doing a outside tire i don't use the duck bill tire hammer to break the bead I have a slide hammer made just for tires BC that inner bead is alot of times hard to break in my experience... I've taken the outside bead off and the inside is still stuck even after beating on it with reg duck bill hammer for 20min i get my slide hammer and break it it in 2 hits.. I also listen to my cheetah tank to tell when it's full,.. do you kno about using starting fluid to also seat the bead?
nice vid man. had my first day today changing truck tires and they didn't wanna show me anything. This vid might help me keep my job. worst first day ever.
Ре Крут in the video it’s a Ingersoll Rand compressor with a Koehler engine. Currently I use a champion compressor with Honda motor electric/manual start.
Can u include a video on seating beads? Some I've encountered would seat good with just air some had to use starting fluid or big air bubble. But would just like your tips it would be nice to know other then that I enjoy your vids you make it look so effortless keep it up!
Chito Lopez Depends on the rim and other things. For the most part if it is rusted, look for where the rust is. If it's on the studs I recommend the back side. If it is stuck to the hub/drum then the front of the tire will work as-well. Use a rubber mallet tho, unless its steel.
Great video very explisive, I personally like using 2 tubeless bar and kick them in more then the spoon I've seen tire guys who don't pay attention tear up the bead but thats me, but again nice presentation (42 yrs experience) started wben I was 18 now I'm 60
holy shit! while you have the basics down. your not showing a tire thats been on a rim for 10 years or longer. those have to be fought of that rusty fucking rim. have you ever tackled a 20 year old farm tire? either peel over or split-rim? ive been doing this since 1979. go home boy.
12 years later and quite possibly the best video I could find for doing this. It is great to hear your thought process and explanations. Thank you
“If you don’t like it, go find another channel to watch” lmao 🤣 perfect words
I’m a new comer at changing tires. Still doing a lot of training. Your videos will help me a lot. Thanks
Thanks for watching. Glad to help.
The best tutorial that I have seen. I would absolutely love to see you do a tutorial on a 19.5 24 backhoe tire. You all make this look so easy, but I can tell you from first hand experience, they will kick your ass if you don’t know exactly what to do. Thanks for your detailed explanation.
Great tutorial video! I changed car and motorcycle tires before, but bought some heavy duty tire irons to change my rear John Deere Tractor tire. This video is a great basic how-to for big tires. Thanks!
I'm23 and a tire man myself I grew up around the tire business my whole life and I've watched about every tire changing video on UA-cam (just BC)and yours are the best... there are a few things we do differently for example on a 10.00 20 in stead of putting the tire on the rim on the ground I lean the tire against my truck and put the rim in the tire and let it all down then put on the ring... As far as the "golden tool" or whatever I've had big companies call me out BC they couldn't change the tire with that thing and seen guys bust a$$ using that thing taking 2-3hrs on 1 tire.... I'll take my tire irons over anything that any day witch brings me to next point I have 2 "curved mounting" bars that I use but 1 of them I ground the lil lip for dismounting the inner bead off the rim so it's like a "spoon bar" but with a lil more leverage BC its longer then a reg spoon bar and if you need that other end it's already right there... also if I'm doing a outside tire i don't use the duck bill tire hammer to break the bead I have a slide hammer made just for tires BC that inner bead is alot of times hard to break in my experience... I've taken the outside bead off and the inside is still stuck even after beating on it with reg duck bill hammer for 20min i get my slide hammer and break it it in 2 hits.. I also listen to my cheetah tank to tell when it's full,.. do you kno about using starting fluid to also seat the bead?
You a funny ass nigga. "I don't need to use it" LMAO.
You are an easy teacher to follow. Well done.
best tire video that I have seen thanks for sharing your time, wisdom, knowledge and experience. May you be blessed in your business
nice vid man. had my first day today changing truck tires and they didn't wanna show me anything. This vid might help me keep my job. worst first day ever.
Great tips in your series of videos. Thanks for making these and sharing the benefits of your experience.
I've watched your videos; 2 of them and and congrats my friend, you really an expert on your line of work
Well done and explained!! Thanks in deed.
What a great video! You do a wonderful job explaining the tricks you know about making the job easier. Thank you for sharing !
Thank you for sharing with us. Have you try the OTC 5727 slide hammer / wheel tipper (ALL in one tool) and really save on your back.
what kind of compressor are you using ?
Ре Крут in the video it’s a Ingersoll Rand compressor with a Koehler engine. Currently I use a champion compressor with Honda motor electric/manual start.
you break it down about the easiest of anybody I have ever watched. Done a few myself. most of mine are 16" GRRRR!! and rust welded on!
thanks man ,i just start doing truck tires,i don't have to much exp ,but those tips help a lot….
Great job explaining and explains the cleanliness of dirt. Very helpful
Thanks for advice Man New to the Game.
I just found you today and your videos, skill and teaching abilities are straight forward and excellent. Thank you.
Bro u do a good job god bless u
Can u include a video on seating beads? Some I've encountered would seat good with just air some had to use starting fluid or big air bubble. But would just like your tips it would be nice to know other then that I enjoy your vids you make it look so effortless keep it up!
All excellent but don't forget to wear safety glasses.
Thanks for some awesome tips
Servicemen have used gasoline in a jug to dismount tire then gas dries if tire has to be handled. Performed at a shop around Cincy.
Thank you for the demonstration, be safe!
I love it! "Don't like it find another channel to watch" lol!!!
Great video nice Ford truck to
Thanks
Are you still changing tires? Bring the videos back.
Great videos!!! i now know how to take & remount a 19.5 (not as fast as you) but i can do it now
Al montar la primera ceja no se debe golpear la llanta con las rodillas con la pura fuerza d las manos debe montarse
old school best way to do it hey this is ben your neighbor
Great training and detail
How did you start your Business
thank for your tips,my job is same your job too.nice to meet you i m from indonesia
You are a bad ass! Thanks for this great info.
Great video bro,I'm looking to start a business. Thanks again bro.
Can you post a video about how to remove a rusted "stuck" rim.. Where are the sweet spots to hit it
Chito Lopez Depends on the rim and other things. For the most part if it is rusted, look for where the rust is. If it's on the studs I recommend the back side. If it is stuck to the hub/drum then the front of the tire will work as-well. Use a rubber mallet tho, unless its steel.
+cj young Also depends on weather or not its an outer or inner tire.
+cj young Ps: This is for getting it off the truck. If you meant off the truck already.. dismounting... really aint not tips I can see being helpful.
Thank you sir for your video
PERFECT VIEDO
STEP BY STEP
THANKS FOR SHARING
Good job dude, thank you for a great video.
👍 Great video! 👍 ☆☆☆☆☆
Brilliant video. Thank you for uploading it.
Tip for hammering. Look at where you want to hit. Many people don't and so miss.
you missed a step. what happen to cleaning the wheel and inspecting it? removing the rust?
thats a gy and mich world.. what he did.. is the real world..
thanks man, for you tips that help me a loot im new on this
you still in business?
enjoyed the video Thanks for the great Tips
Great video very explisive, I personally like using 2 tubeless bar and kick them in more then the spoon I've seen tire guys who don't pay attention tear up the bead but thats me, but again nice presentation (42 yrs experience) started wben I was 18 now I'm 60
if you were to dismount standing you would only have to lift once... not knocking on you or anything but as the saying goes work smarter not harder
great tutorial!
I want to go change truck tires now.
best step on the first bar or take out not leave it in as they have pinged off an gone flying
Pretty much how I do it lol Jr do u still have a face book page?
Dónde estás cubano
How much is your income per tire you change or repair?. Is it a good source of money?
CAN'T BE ANY BETTER WAY THAN THIS TO DISMOUNT AND MOUNT BIGASS SEMI TIRE
Good video you have done there, thanks for sharing, i have learned from you posting.
More easier then the tire is old but new tires are little harder
Great video
Go😃d Job buddy,thanks for the info,,, have a good day,! 🙌
Hi sir I am tayar truk taknican my what up nambar 00966580125371 viza send me
Nice video
For a real challenge, knobby motorcycle tyres with tube. Good vid. Only comment is your lack of safety.
👍👍👍👍👍💯
very good
Has a tire ever blowin up on you?
Sure has
As you may have noticed most of the guys who knock on you haven't posted a video and they likely won't!!
thanks a lot man
+yousuf evloev glad to help
Thank you
Thanks for watching
Dude, Bad Ass..thanks
Thanks brother
awesome video for a guy with 2 bars and a cheetah tank! everything you need to know to be dangerous!
I like this work because it is my work
Thank You!!
thank you helped alot
Great!
what no GT bar lol
Genius
very good. thanks
So much background noise...had a hard time hearin' y'all. Nice video otherwise.
Ok
ma man what your showing is dangerous
aaron broughton Yeah it's a dangerous business. It's not for everyone. If you wanna stay safe then get you an office job..
murtza
holy shit! while you have the basics down. your not showing a tire thats been on a rim for 10 years or longer. those have to be fought of that rusty fucking rim. have you ever tackled a 20 year old farm tire? either peel over or split-rim? ive been doing this since 1979. go home boy.
Great video
Thanks
Great video