How to replace a Stator & Flywheel on a Modern Vespa ET4, LX150 or GT200
Вставка
- Опубліковано 28 лип 2024
- TOOLFLY: www.scooterwest.com/tool-fly-...
436783: www.scooterwest.com/variator-...
828135: www.scooterwest.com/stator-pl...
82572R: www.scooterwest.com/flywheel-...
82580R: www.scooterwest.com/sensor-fo...
486075: www.scooterwest.com/washer-oi...
825430: www.scooterwest.com/flywheel-... - Авто та транспорт
![HOW TO TEST A STATOR / WHAT IS A STATOR [step by step] GY6](http://i.ytimg.com/vi/VoXYzQ61tRM/mqdefault.jpg)
![HOW TO TEST A STATOR / WHAT IS A STATOR [step by step] GY6](/img/tr.png)
Thank you so much. Awesome video and very thorough.
Thanks for the video! Mr. Robot
Mr. Robot do you have a video on replace bearing rear shift clutch to the engine on 2007 Piaggio mp3 250? Thanks.
great video . do work on kymco like 150I ?
Thanks for the video. I have a question: i have liberty125 year 2004 it consume too much fuel. What have to do?
I have a question can i install starter kick in liberty 125 year 2004?
What size are those 3 phillips screws that hold on the stator wires? Or link me to the part :) Thanks for the helpful vid.
Is oil sensor switch blocking stator to produce a spark when oil lvl is too low?
How to removed one way clutch veespa..125 magnetic
Hi,
I have a 99 et8 (4 stroke) , the choke is not getting any power to it, I've just replaced the coil, and I've replaced the relays...could the stator be the problem? Thanks
do you know if its possible to remove the flywheel with an impact wrench? it worked on the variator :D
My bike will start and run with jumper cables but will not stay running when I remove the cables, how do I know if it's the RR or the stator
Jeff, I like your shirt.
My wife rides a LX. One leg of the stator died. The stator was ok but one of the little screws that attaches the stator output wires to the stator was loose under the goo. I tightened the screw and replaced the goo and all is well.
Hello, Thanks for the video, I have MP3 400ie, I like to ask you about the following issues I have: some time ago, when I wanted to open the seat, it did not work using the key, I had to turn on and off the scooter once in order the seat to open. I noticed in the cold weather (few days ago) when I wanted to start the scooter, I heard click when I press the on button and pressing the brake leave and giving a bit of throttle, I have to press it several times until it starts, I checked the battery, the guy told me the battery is good, although it is more than 4 years old, he told me most properly it is the stator, so can you give me an indication whether it is the stator, starter relay or reconditioning the starter motor or change the battery? thanks a lot.
Dude, if it just clicks, and doesn't turn over, most likely culprit is a dead battery. Get a multimeter, and when it does that, check the voltage. if it starts doing that in warm temperatures as well, check the voltage.
@@peteleivo2247 Hi thanks for your response, it was the battery, I changed it, and now it is going like a dream!!!! thanks a lot,
@@adamhann7584 No big deal, i dealt with a similar issue on an Yamaha Xmax 125, the battery was at least 5 years old, and the bike was pretty late on maintenance. Glad you got your bike in shape, safe riding.
Hello sir, my engine is Piaggio Fly150, my battery is low and when I started it, it did not start. I checked the ignition system, there is no ignition in the spark plug, I tested the coil, the coil is solid, what should I do next, I would be very happy if you could help me.
Note: My motorcycle does not have an immobilizer, it has an EFI SAE J590B AC20 ECU.
This happened to my LX50 and it was the stator.
@@MsBananasmel Thank you for your answer. I measured it with the stator measuring device. The values are approximately the same at each winding end. I couldn't measure the ignition tip coming to the coil, do you think it might be related to this?
I see that malossi 190 kit on there… 😂😂