DIYHEMI mid sump oil pan install on a 6.1L Hemi engine - Pink Panther ep. 2
Вставка
- Опубліковано 19 сер 2021
- Blake and Mike is back again (finally) at DIYHEMI, sorry it took so long guys! But we have a legit air conditioned office in our shop now!
Anyways, we are working on Project Pink Punisher and installing a new Milodon mid sump oil pan on the 6.1L Hemi swap Barracuda (Cuda). It was a pain to install because at first we reused the old windage tray, which wasn't the problem. The biggest problem is that because the Milodon is a stamped steel pan, it is not as rigid and so your sealing is not very even across the seal area. We basically did not put a full bead around the whole gasket and both sides and it leaked. We then changed it to a FelPro gasket we got at O'reilly and it worked beautifully with the full bead of RTV. We are pushing through on this hemi swap! We will keep sending you guys content on this project. Hemi Swap the World! #HSTW
Thanks guys for watching
If you want to help support us more! Please check out what hemi parts we have available in our store! We are continuing to add products to our hemi swap product list. Our new QUICKHEMI harness is now in stock for a full plug and play standalone harness that plugs into the factory PCM/ECM and the existing engine harness. Yes our harness saves you a good bit of money because we still utilize the existing engine harness that will usually come with your junkyard swap hemi.
sublimeparts.com/collections/all
CHECK OUT OUR GOOD FRIENDS AT:
Talking Mopars www.talkingmopars.com/
Big Blocks Garage bigblocksga...
Jonny Mopar / jon.defries.5 - Авто та транспорт
Very good information guys! Thanks!!!
Great video, thanks for your efforts
Turn the bottle sideways works much better
Great to see yall back posting. After seeing the article in mopar collectors guide. I thought yall might be swamped. Have a good day
We are just glad to be back 🍻
What is the torque
RTV stands for room temperature vulcanizing. 🇨🇦
great video guys ...
What year jeep cherokee dipstick did you use?
Thank you for the great video
Always appreciate the supportive comments! Thank you for watching and we hope it helps. 👍
@@SUBLIMEparts to watch you guys go through it helps 100 dang %!
Would you know what oil pan I would need for a gen 2 ram?
Hey Blake, I don't think the Main bolts are torque to yield according to Chrysler, they are torque to angle, but don't necessarily hit the yield point. Head bolts are torque to angle as well and not yield, the rod bolts are torque to yield though. That being said, it's pretty cheap insurance to get new bolts, better to err on the side of safety so good advice.
Yeah I’ve heard that as well. I’ve heard both torque to yield and not, so I always err on the side of caution and treat as torque to yield. They look like a chromoly based bolt, but I have no way of verifying. At $25 ish dollars for all bolts, it’s cheap insurance like you said.
I’m kind of weird like that. If I cannot find a solid source of information, I assume the worst case scenario 🤷🏻♂️
That 90° is very specific. You need an actual torque angle gauge or a couple companies make digital torque wrenches with the angle feature. I have the snap on version and it's awesome.
Blake’s 90 and torque arm are above any calibrated instrument 🙏😆
@@SUBLIMEparts I thought I heard it click! Haha
I got lucky, a lady was selling a snap on torque angle gauge for 50$ on Craigslist.
I will be done with it mid August and will be happy to pass it along
Started out with milodon dipstick, ended up with?
Jeep Grand Cherokee. The milodon ones don’t stay in that well
What year keep Grand Cherokee, please
Room temperature vulcanisation
ARP main bolts are hard to come by over the past several months - I tried to buy them with no luck. Last I heard it was October before they might have them again
Lmao if you can find them I need a set.
I have tried sealing the Milodon pan 3 times with a small leak every time 😠. I have a Holley pan on order.
We are sorry to hear that. It stinks when little things like that drive you crazy. Please let us know how you like the Holley pan, we are really curious about them
I’m swapping my pan for a Milodon mid sump on my 2021 6.4 Hemi. Any idea where I can get main bolts and studs? ARP is sold out until November. Any other manufacturers make good aftermarket bolts?
We are an ARP or OEM only type shop. They have the best products. Have you tried ordering through your local dealer?
Will the 05 computer work without a catalytic converter? I'm swapping a hemi into a dakota and didn't want to install cats since its going to be a bracket truck mainly
I have a 5.7 out of a 2009 jeep grand Cherokee, will the pinout sheets on your site work on the 09 harness or is it only up to 08 ? Thanks Monte
room temperature vulcanizing
My name is Mike James
hemi swap 1995 thunderbird
Would there be enough room, to run in every main cap? Right now arp only has main cap oil studs and not other studs, have a engine waiting on just studs and would like to be able to get it done?
Or if there’s a way to machine the top of the stud off.
Blake, You need to wear a mic. You're hard to hear.
Yeah we do need better audio but it’s what we had at the moment. We will continue to try and improve as time goes on,
3 minutes into the video and I can't hear a word you're saying and my audio is wide open