Bought this item in the States from a distributor. Can't find any e-mail contact for Derraco (the company that designed the unit) on their website. Have a few questions about the version I got: 1) My unit does not have a green power button. It has a silver button that is flush with the case when OFF, and recessed by 1/4" or so when ON. Is this a knockoff? 2) The plexiglass shield to keep cases in the hopper (hopper holds 185 .30-06 cases if you are interested) was drilled for the securing post...but it does not snug to the washer closest to the unit. Am I supposed to relieve the hole in the plexiglass to fit the post? 3) My shield securing post hardware came with three washers but instructions say to use two...do I just hang on to the third one? 4) I received a parts box with screws, e-clips etc. No indication where these go or what they are. I assume they are just spares. 5) The entire case of the unit is ventilated. Is all that venting necessary? Only asking because I would like to put a pouch on the back to hold the instruction manual and wrench set and spare parts kit so as to keep every thing together. Said pouch would block the vents. 6) The gas bottle stand is troublesome. I can't get it close enough to the unit for proper alignment of the bottle. The stand 'legs' hit the unit baseplate so that the flame is aimed towards the unit wheel. Been doing without the tank stand and simply resting the bottle on my work bench. For those using ANY annealer, remember to sort your brass by head stamp. Some brass may be thicker than others, or use a different combination of metals to create the brass. This will affect how your brass reacts to the heat. Setting your speed and flame strength for military brass may over anneal the thinner commercial brass. Poorly made brass may show hot spots of over annealing within an otherwise perfectly annealed case. Also make sure you check your brass for live primers. I fill my left hand with a sheaf of brass, then turn to look at the primers, then place them in the hopper when I am sure there are no live ones. This is important if you pick up range brass or if you have a case from which you pulled the bullet and dumped the powder and simply tossed into your 'spent' brass bucket.
Gday mate. I saw you put a review here with a link with photos. It looks like that UA-cam deleted it automatically because you included a link. Really glad you love our Amazon USA versions. Kindly ask you to put a review on Amazon. that will be really helpful for us. thanks Cheng the designer of UGLY ANNEALER
Hey - It depends on who is selling it. You can buy direct from OZ, or from a reseller in the US. Obviously prices are different due to currencies, shipping, etc.
i want 1 of these annealers...so how do i get 1?? and when are they available...i'm in the U.S.A. i need contact info, or where to buy..thx......looks great to me
Bought one yesterday. Very much looking forward to getting it. Thanks & assembled in oz , bloody love it .
Great piece of kit and your presentation skills are excellent!
This thing rocks! It makes some of the other ones look like TOYS.
great video and straight up presentation
Bought this item in the States from a distributor. Can't find any e-mail contact for Derraco (the company that designed the unit) on their website. Have a few questions about the version I got:
1) My unit does not have a green power button. It has a silver button that is flush with the case when OFF, and recessed by 1/4" or so when ON. Is this a knockoff?
2) The plexiglass shield to keep cases in the hopper (hopper holds 185 .30-06 cases if you are interested) was drilled for the securing post...but it does not snug to the washer closest to the unit. Am I supposed to relieve the hole in the plexiglass to fit the post?
3) My shield securing post hardware came with three washers but instructions say to use two...do I just hang on to the third one?
4) I received a parts box with screws, e-clips etc. No indication where these go or what they are. I assume they are just spares.
5) The entire case of the unit is ventilated. Is all that venting necessary? Only asking because I would like to put a pouch on the back to hold the instruction manual and wrench set and spare parts kit so as to keep every thing together. Said pouch would block the vents.
6) The gas bottle stand is troublesome. I can't get it close enough to the unit for proper alignment of the bottle. The stand 'legs' hit the unit baseplate so that the flame is aimed towards the unit wheel. Been doing without the tank stand and simply resting the bottle on my work bench.
For those using ANY annealer, remember to sort your brass by head stamp. Some brass may be thicker than others, or use a different combination of metals to create the brass. This will affect how your brass reacts to the heat. Setting your speed and flame strength for military brass may over anneal the thinner commercial brass. Poorly made brass may show hot spots of over annealing within an otherwise perfectly annealed case.
Also make sure you check your brass for live primers. I fill my left hand with a sheaf of brass, then turn to look at the primers, then place them in the hopper when I am sure there are no live ones. This is important if you pick up range brass or if you have a case from which you pulled the bullet and dumped the powder and simply tossed into your 'spent' brass bucket.
Hi. I have replied your email. thank you for your advise.
Is the case ejector motor driven, magnetic, mechanical linkage to main drive motor? How does that work?
Got me ordered mine last night 👍
What does the shipping time to the US look like currently, with the backlog of ships and all?
like 10 days. We use fedex or DHL
Bought one today…awesome machine guys…..highly recommended from a seasoned reloader
Is the bottom wheel fixed speed, or does it speed up and slow down as you adjust the time?
I bought a few days ago. Can't wait for delivery :)
Please what gas torch do you reconmmend
Bernzomatic UL2371 works the best with our annealer
Gday mate. I saw you put a review here with a link with photos. It looks like that UA-cam deleted it automatically because you included a link. Really glad you love our Amazon USA versions. Kindly ask you to put a review on Amazon. that will be really helpful for us. thanks Cheng the designer of UGLY ANNEALER
@@feicheng6606 I already diid a review on Amazon. I am waiting for the approval from amazon. I included some photos too.
@@YERAFirearms Thank you
I'm definitely getting one after Christmas
I'm a bit confused, I see your annealer on your home page, on amazon, and on ugly reloading usa...all for different prices.
Hey - It depends on who is selling it. You can buy direct from OZ, or from a reseller in the US. Obviously prices are different due to currencies, shipping, etc.
Is there a link where I can have one shipped to the USA
Amazon
A nice looking machine.
i want 1 of these annealers...so how do i get 1?? and when are they available...i'm in the U.S.A. i need contact info, or where to buy..thx......looks great to me
Search ugly annealer on Facebook and we can chat there in regards to an order. We have machines available for USA.
Amazon
Can we the ugly annealer handle 6br cases?
will it do 300Blackout?
yes it will do 300BO
@@feicheng6606 With what spacer please? Very interested
@@Dayattherange catching wheel use 223 insert, lower rotation wheel use 15mm diamond wheel
Thanks
Can this do 458 Socom?
Just had a look at the photo of this caliber. Should do.
@@feicheng6606
Thanks for the reply👍
How much? USD.
it is $295 USD posted to USA
lol. if you want to move to america cos its got more guns... lololol