Universal Sequential LED Controller | Corsomotion | FlyRyde
Вставка
- Опубліковано 26 сер 2024
- Universal Sequential LED Controller from Corsomotion
Check out this unit and save 10% off by using promo code: "FlyRyde"
corsomotion.co...
▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀
Here is a shopping list of the Tools and Material I use in the shop:
www.amazon.com...
(I will receive an affiliate commission for orders made directly after visiting my Amazon Influencer Page)
ⓢⓤⓑⓢⓒⓡⓘⓑⓔ
www.youtube.co...
Call us: (909) 684-5044
Website: www.FlyRyde.com
▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀▄▀
FOLLOW US ON SOCIAL MEDIA
IG: / flyryde
FB: / flyryde
Twitter: / flyryde
I'm thinking if you drew a diagramme of what you are explaining ,it would help.
Did a search for sequential led and found you. Excellent video that told me exactly what I needed to know. I'll be looking into the Corsomotion controller to start but may end up needing the Ghost system to do what I have in mind. Thanks!
Seriously I also want to do magics with LEDs like you ..Be my teacher
We need stuff like this in Australia, both modules look awesome, really wish I could do this to my car
sascat2010 order online and get it shipped over
sascat2010 what kind of car do you drive?
@@flyryde I own a ford Falcon fgx g6e turbo. The head lights and tails light would be perfect to do custom work
New corso mod is a must for beginners for myself but in the future would like custom controller. ThX for video tutorial
This will be good for the people who are starting with lighting
The answer is yes!!! I bought one that was more user friendly then that on eBay a year ago for like $35 it is 8ch x2 duel mode settings too no lie....
I got a mazda RX8 and will be doing custom head lights with the blueghozt controller for demon eyes and some sequential LEDs I cannot wait to put them together. These videos are so informative thanks for all your hard work and self learning videos!!!
All the way from Canada eh!!! lol
once I get the money, I am going to use this on my car and see how easy it is, lots of people in my area just want to sequence so this would be perfect
Like the plug and play, I am hoping to use it on my 2004 Honda Odyssey to add a 3rd brake light to the back doors under rear glass spoiler with the turning amber ghost effect
How did this go?
You’re videos are informative. One day I’ll have the $ for the course.
Corso, 2014 Lexus IS250 for the tail light
Its probably not cost wise but its always good to have both types(pnp and diy) but idk, guess it always depends on the project.
akirony I believe the cost is about 28 bucks each?
Corsmotion state their LEDs are for show or off road use only so why do people fit them on road cars or am I missing something. Great videos by the way.
Need the strobe controller video !!
SkitzV I knooooow 😱
Fantastic work you're a genius man I like you special work 😍
welp...that looks like what i should have bought😕...especially with that speed adjustment screw
I would like to Plug and Play. Have a 1990 Mustang with rear LEDs I would like to sequential. My question is would this work with a pair of Spyder rear LED lights for my vehicle?
So when i have more than 14 leds but the module has only 14 chanels how control every single led with this module?
Love your content!
Bio LoneWolf glad you enjoy it 🙏
Precio del curso para aserlo yo mismo con traducción aquí en México
Each headlight need their own module even for ghozt?
First off let me say thanks!! You have truly inspired me to do some headlights I never would have tackled by me self. Do you have any input on the yuniqueled ledstripz they offer over the power led that you have used. Wanting to build some custom sequential using the corso sequential module. Thanks for any help and keep up the awesome work my man!!
Where can I buy these programmable PCBs please
Would this working if i wanted to make the OEM turn signals on my fk8 CTR sequential ? I'm looking for something plug and Play so I don't have to cut into the harness
What led should I use
If I would use it in a vw golf how is it with the can bus? Will I get turn signal failure signal or something?
And do you ship to Germany?
do you have mazda 6 headlight
Is it possible to have at 6v?
What is the white “circuit board” material you have the leds mounted to called, and where can i order it? I’ve seen it in other videos too, it looks like it comes in sheets and you can cut to fit per application….
I think i figured it out by watching another video. 😂 Is that the OEM board from the original headlight and you just modified it by adding the controller? 🤷🏻♂️
@FlyRyde I'm looking to build a set of taillights for my 2011 Challenger. Would I need two sequencers? One for each side. Thanks for all your videos Chris :D !
can u take regular bulb taillights and basically rebuild them with led strips etc?
The supply for the module corsonmotion is only negative and signal of the turn light? or need other wire.
Thanks for your comments. Regards bro
I'm looking for led switchback strips that are NOT sequential! Please help. Can the strips be modified to blink solid?
What do they cost
Wer can I get this
It’s cool bro 🤘🏻🤘🏻
Nama modul running lednya jenis apa ,berikan aku jawaban teman
BMW E36 pls
Is this the box you told me about for my led issue on the old school c/k Chevy tail lights?
Anime Racer possibly? Not 100% sure, but this is the easier way to get sequential without all the accessories needed for a full show mode setup.
Is that a marble slab you are soldering against?
how much is the controller / led?
Kenn Mossman should be 25 and change each plus shipping (if you use the promo code: “FlyRyde”)
I’m new to this kind of thing and I want to make a sequential turn signal on my tailights with a reverse light function using the corsomotion bi color leds. What calculations do I have to do to figure out the max amount of leds I can use per channel on this sequencer
use ribbon cable?
What name of the moduel sequential board?
Necesito ese equipo
Bro I want to learn from you ..But its hard to graps it only through internet ...Are their any other options from which I can learn from ...
Just wondering what are your rates for customized tail lights for a toyota sequoia?
use molex or similar?
Kenn Mossman this one doesn’t have any fancy quick connectors, but I’ll suggest they change that in an updated version.
Are you still taking on projects? I’ve been wanting to have some taillights done but I’m weighing the options of diy of having someone do the wiring and soldering for me.
May I know how to buy the controller?
hello man how change the color? i want to know that. Greetings from the Dominican Republic, San Pedro de Macoris.
Plug and play module.
Will this module work for the DD C-lights for Subarus?
pats4life as you see in the video, I’m soldering each channel from the module to a purpose built spot on the board that controls one small group of LEDs (4 out of the 112 amber LEDs).
Diode Dynamics doesn’t make anything with dedicated grounds isolated for a sequencer. You could hack something up and do your best to calculate what resistor you’d need... but I reeeeeally don’t recommend trying.
FlyRyde thank you I appreciate the quick answer👍
No tienen número de ws????
awesome
Is ghost capable of doing the trailing effect? Id prefer that
Ghozt can do all of that and more However it needs to be programmed those come ready to go
Henriks Boot oh ok I get it now, basically it’s for people who don’t have the program.
If it's something that interests you check out Chris's discord and twitch channels there's plenty info on how it's done and lots a people who can help 👍
Henriks Boot which one does he use the most? Should I get discord or twitch?
Discord is where we all get to hang out/talk to each other, bounce ideas and show what your working on, twitch is where Chris streams live working on projects builds etc you can also chip in while he's live, so it's a bit of both 👍
i like ghost model
Hello,
i want to make the turn signal sequential on my 2012 Charger (not with the factory PCB) and i found 2 types of sequential modules :
common 12V, individual ground (like the corsomotion) and common ground, individual power (like zleds s10).
What make choose one instead of the other ?
How many outputs do you need?
@@flyryde i will have 5 drivers with 2 leds each
@@flyryde For the moment, I thought of taking the s10, because of its small size (40mm x 30mm) since I am limited by the space (max 35mm). It is sure that by using only 5 channels, the Corsomotion is perhaps too "big", but I was mainly asking the question of the advantage or not of having individual ground instead of individual power
Cool 😎
dude, turn the music down. the video is great tho.
The problem is " you are talking too much"