2017 BMW 540i BRAKE PAD AND ROTOR REPLACEMENT, G30: Tips and Tricks to make the job easier!
Вставка
- Опубліковано 6 вер 2023
- #Bmw540i #g30 #b58
In this episode we replace the brake pads and rotors on our 2017 G30 BMW 540i and show some tips and tricks to make it a little easier
CHECK OUT OUR GREAT SELECTION OF PARTS AND MERCHANDISE!
www.lowboostfilms.com
LINK TO THE REVERSE TORX SET
amzn.to/45ESwYJ
LINK TO BMW JACKPADS
amzn.to/3LdIvKe
HERE'S THE LINK TO THESE FENDER VENTS
amzn.to/3euNLt6
GET YOUR CAR PARTS HERE AND USE COUPON CODE "LOWBOOST10" FOR DISCOUNTS!
x-ph.com
BURGER MOTORSPORTS WEBSITE
burgertuning.com/?rfsn=479576...
CHECK OUT THE LOW BOOST FILMS AMAZON STORE!
www.amazon.com/shop/lowboostf...
HERE'S THE LINK TO THE BLACK KIDNEY GRILLS
amzn.to/3ncXo0P
GET YOUR LOW BOOST MERCH HERE!
www.amazon.com/dp/B0848GQPZX
CLICK HERE TO SEE ALL OF MY OTHER VIDEOS
/ turboclipse182
BURGER MOTORSPORTS WEBSITE
burgertuning.com/?rfsn=479576...
My Equipment (These are paid links, if you could shop through the browser and not the app it helps us out. Thanks!)
Gimbal-Ziyhun Crane 2
amzn.to/2HgHrY1
Camera- Canon Rebel7ti
amzn.to/2Kp3Cwr
I
Audiotechnica ATR2100 microphone
amzn.to/3aOUeNW
72 inch Tripod
amzn.to/35MM5Xo
Mic- Rode Video Mic Go
amzn.to/3lNfJkC
3 Suction Cup Mount
amzn.to/35KXfvJ - Авто та транспорт
This is the first good video of someone doing this service with the standard calipers. Everyone who has posted videos like this for the G30 has the M Sport calipers. Thank you!
Thank you for watching! They’re very similar, just don’t need to have a specific rotor.
exactly he explains evrything
now I have to figure how to clean jack the front of the 2019 5 series
dude this is the best vid
I’m glad you enjoyed it!
Thanks!!! Did my brake job following this vid today.
Awesome! Happy to help
I'm in the market for a BMW now and just wanted to see how the maintenance for brakes, oil changes etc are for these cars. This is something I can definitely do my own when the time comes. Good work man thanks for the tutorial!
I’m glad to be able to help!
Excellent video and all bases covered. I had a real hard time getting my pads into the calipers. I used my air compressor to really blow out all the dust and, though it couldn't have made more than a few thousands of an inch difference in tolerance, that made them snap right in. Doing this job again tomorrow after about 30k more miles.
Wow, that little bit made a big difference then. Good luck it’s not hard just gets messy with all the break dust. Hopefully my video was helpful!
Thank you, it took me hours and hours to figure it out how you put the clip back .
Happy to help!
Hello Sir, I also ordered the pads and the rotors from FC EURO, I am a bit confuse with the Pads (BMW Genuine) .it has 2 pads withe the sensor slots and to without the slots. Why would I need 2 pads with slots if my vehicle has one sensor. How would I install them? One with slot one without the slot On each side (R,L)? thank you in advanced
Can you tell me if the 540i brake calipers come with anti-rattle clips? Also, unfortunately I had Les Schwab do my front brakes and my rotors are all rusty after only 8k miles! What would cause this? THANK YOU
Yes they have anti rattle clips. The rust doesn’t come off after you drive it?
For reference I have a 540i m sport package. My calipers look exactly the same but are red no m logo on them was wondering what brake to use @ low boost films
Aftermarket painted red? M sport brakes were Blue
Thank u bro I thought so but wanted a second opinion after seeing the video figured u be good to ask 👍👍🙏🏽
@@brianellender5537 glad to help!
Do you feel the 540i will hold up well in the long haul? I'm sitting at 160k on my 2009 335d and looking at replacing it in the next 4-5 years. It runs great but interior is showing wear and would like more modern tech at some point. Thinking about buying a 3-5 year old low miles 540i with cash when the time is right. I like to buy something nice and drive it 15-20 years (I only put about 10k a year miles on a vehicle)
Yeah, I think if you take good care of a 540 it’ll last a long time
The guide clips or anti rattle clips gave me the nightmare and after a while I got rattled and threw them away. Are they an absolute must? They were proving to be more of an hinderence
I think they’ll work without them but could wear out faster and or rattle
Just got my G30, where did you set the jack stands?
There’s little squares under the car, you should get bmw specific jack pads for them.
Where can I get brake pads and rotors for my 540i(not blue caliper)
Www.fcpeuro.com
What was the product that you sprayed at 8:53?
Brake cleaner
I have 2020 bmw 540i xdrive not blue calipers but my calipers are different why is that and it had different break pads
The blue calipers are bigger and required different brake pads
Did you purchase your 530i new? I’m looking to purchase a used one with 68k miles just kinda worried about an expensive repair 👨🔧💀
540i, certified pre owned has 38k on it. Only thing it’s needed so far is rotors and pads now with 60k
@@LowBoostFilms ok that’s great to hear got some peace of mind knowing other people are not really having any major problems with them… the one I’m looking at is a 2017 530i xdrive with 68k for around $22k
@@mannycolon5458mine is 2017 plate I’ve got 540i xdrive in 2020 at 38k miles, now it’s 64k, rear shock absorbers leaking-adaptive suspension, sometimes is asking to add coolant and that’s it.
Where is the link to the place that you got the parts?
Sorry, I got them all at www.fcpeuro.com
What about expansion spring and guide pin?
What do you mean? I don’t think this has them
Can you post the links to the rotors?
I’ve the same car just different years…I got a 2018 540i
I don’t have the link, I got them right on FCP euros website
Any recommended grease points on the caliper ?
Yeah, so I don’t think I was able to video that because I had it all over my fingers and it didn’t record on my camera, but those anti-rattle clips you can apply some grease to where the pad slides
@@LowBoostFilms one last question.. was it hard to get the rotor screw out any advise so I don’t strip it ?
@@skwid98173482if it hasn’t been changed in a while spray some PB blaster on it and let it sit for a few minutes before trying to get it off. That’ll loosen the rust off. If it strips you’ll have to drill it and use an easy out
jarruulle pitää sitte aina teherä pieni sisäänajo
Take my word for it, you’ll be having runout in about 12-15k miles. These rotors for whatever reasons suck. I always have two sets on rotation.
Damn, good thing that’ll take a few years haha