Definitely needs an update in regards to ID. Solid ID numbers directly under the coil but anything past 2 to 3 inches in the soil target ID jumps around. I've noticed too whenever you change frequency you need to noise cancel and ground balance again as it does not carry over. Annoying but definitely a necessity for stability. This detector is more mechanical meaning you need to dial it in cross the T's and dot the i's will bring more success with the XTPRO. Nice find dude. Pretty good considering you were in 10khz on the Gold ring.
And I have lowered my sensitivity down to 12 and I have let the X-Terra Pro tell me what is in the ground and I have since Raised it up to 18 Sensitivity Now and when I get a Jumpy VDI I know that it's a JUNK Target And Or something Relic but I only Coin Shoot and I have enough of the Simplex Relics that it told me to Dig 👎. .. and I have Since got rid of the Simplex +....
Regarding the target ID, keep in mind each target block on the scale is allotted four numbers. Your never going to get rock steady VDI numbers on the X-Terra due to this and the unit being a single frequency unit. No update is going to change that unless it was built in to the capabilities of the hardware when designed by the engineers.
I’ll remember to dig 20 30 50 and minus iron signals now with my xterra 🤣 Goes to show…. My old sovereign Elite with ID meter used to just bang on Rings ,(All my best finds were with a Safari I loved that thing too The overload feature I found handy) These new machines do all sorts of crazy stuff haha I’m surprised after using the equinox how fun the xterra is for the price though.. Enjoying being able to go out again after selling all my machines (minus the heavily over priced and heavy gpz I had to take a house deposit out for) lol Btw thanks for taking the time to make these videos for everyone to watch man Awesome!
Saweet gold ring! Got my XT Pro coming in on Tuesday, hoping the stock coil gets some decent separation until the 8x5" coil is available. Maybe I should just go with the 6" Nox coil?
The Xterra has a huge handgrip that makes for a very uncomfortable hunt after a couple hours. The Vanquish has multi and has an S shaft. Vanquish is much much more ergonomic.
Thanks for sharing some footage of the xterra pro, ive had the legend about a week and loving it so far! I had to pull the triger with it being $150 off.
I've been watching others hunting with that machine saying the tones sound bad if they're very deep, but once the target is out, it sounds great and totally different. But I bet it won't take you long to get the machine dialed in, the pitch was sounding better to me also, congratulations on the gold brother 👍🏼
I keep reading once you get the right settings dialed in that it is a beast. I also heard that beach mode is secret multifrequency on this detector that minelab is hush about
You would be surprised how many people buy the cheap Bounty hunters, besides the stock coil on this is too big for a lot of people including me. The coil Paystreak is using cost as much as the detector.
Nails? I have never dug a nail wth the X TERRA PRO or any other Minelab VLF that didn't have coin in the same hole. Can't help but question the motive of you posting these videos.
Little late, but I hunt a freshwater swim area that has bad soil. Years ago I brought a rock home. learned it was a hot rock. When I hunt that area I switch to beach mode 1 or 2. I accept everything above 0. I use 5 tone. It's locked in a 8 Khz and seems gets rid of most chirps.
Congratulations on the little gold ring ! That little coiltek coil is forsure a sniper coil for cherry picking coins and it will definitely hit on the smaller gold jewelry!! I have it on my 700 and it picks apart parks it doesn't miss much but maybee for some deeper targets. Anything in the 1-7 inch range it doesn't miss it will hit past the 7 inch mark thow..!! Good luck and happy hunting ! ✌️✌️✌️✌️✌️✌️✌️✌️✌️✌️✌️✌️✌️✌️✌️✌️✌️
A gold on your first hunt with your new machine! That’s like playing your first slot machine after arriving to the casino and hitting the jackpot on the first pull.. 😆 Congrats!
The detector these days have very very fast processors. We find lots and lots of rings, jewelry, coins and gold swinging fast. Just gotta train your ear to the tones.
So far every video I've seen on this machine has the initial comment "wow the numbers and tones are all over the place". It seems to be a little unstable for most people. I predict an update coming soon. It seems to me it's having a problem with anything oddly shaped, like a gold ring on edge. 😆
The numbers are all over the place. It does not like my soil in 6 out of 7 parks/schools I have been to in the last 2 days. Hopefully Minelab will come forward with an update to get through the harsh soil and stabilize the numbers.
But not everyone can be able to get the Full Sensitivity without any kind of Ground Feedback and that's what is Happening with the X-Terra Pro it's Pretty Powerful Detector that can be lowered and still getting Targets and I have lowered mine at 12 Sensitivity and I was getting Targets in the 6-8 range and Swing Speed 3 And I know that it's not the Deep Settling but I swing pretty fast and I can change it up for what I like to get but the Simplex and it's 3 Tone's High Medium and Low Tone 🤣🤣🤣🤣🤣......
@@Winteriscomn Yes it's a Updateabile and the update is Not Necessary for the X-Terra Pro to work and I have lowered mine to 12 Sensitivity and until I got use to what it was telling me about the target and I have seen some people that are expecting it to and All Detector's to be able to do the Full Sensitivity without any kind of Ground Feedback and that's why the Jumpy VDI is Happening with the X-Terra Pro and Even when I was using the Simplex + , I was on 3 bars and it's going to be Site Dependent on how much Sensitivity you need to get the targets and I have since Raised the Sensitivity up to 18 now and I understand the Jumpy VDI and it's occurs when it comes to a Junk Target And it's amazing how much it knows and doesn't necessarily need a Update......
Congrats on the gold ring! It will be interesting to see how the signals change over time as you get more experience with the machine and are able to get it dialed in in your mineralized ground. Cool find.
Does the vdi change every time you are in a different frequency or mode. Is it different numbers to learn . I know a nokta impact has a normalization setting so v di is constant through all modes and frequencies
Rings are simply luck if you pass over one. No rym or reason for where they will be. You can hit high traffic areas but as I have done for the last month I have pounded the high traffic zone at the town soccer field. Not a single ring. Even a costume junker. Nothing. I was tired the other day so I moved out to the middle section that's just grass not where they play soccer or sit. Just a big grass area. Only a target every 6 to 10ft. BAM I hit an 8 gram gold ring! No reason for it to be their. It's nothing like gold nugget hunting. Where you can raise your odds and look specific where the gold should be. Rings are just where they where lost. Could be 2 ft from the parking lot....could be in the middle of the park. Today I pounded the same soccer park for 4 hours. Over 200 targets dug. 98 coins total and the rest pull tabs and can slaw. One costume ring in all of that. You just never know when the gold gods will get you over a ring. Dig dig dig and keep on digging. I have probably dug over 1000 pull tabs and pieces of can slaw in the hundreds to. Then I hit the 8 gram gold ring and it rang up with a 42 VDI on the Legend which I though would be a zinc penny. Who knows!
Congratulations on the GOLD 💥💥💥👨🦯 Manticore, Search Mode High Conductors, the Target Trace for gold paints a dirty picture. Switch to Low Conductors and the Target trace for gold is nice and orderly, aluminum caps, pull tabs, and foil look great too. Just the opposite for Silver. I heard an iron tone after flipping the plug. The gold ring was closer to the surface, half inch deeper and that ring would of never seen the light of day. Soil masking, you either focus on shallower targets or dig the iron tones and aluminum. Brutal. Tks! GL👨🦯HH
It's a ring, got a ring,1 inch in the ground,why did target) give a iron reading,was GB set wrong😮 Sweep speed stupid. Good target surface. Total luck of the draw find.
Nice Paystreak! The only gold I see is when I look in mirror and see a gold cap on a tooth😂 " Bring It"
Definitely needs an update in regards to ID. Solid ID numbers directly under the coil but anything past 2 to 3 inches in the soil target ID jumps around. I've noticed too whenever you change frequency you need to noise cancel and ground balance again as it does not carry over. Annoying but definitely a necessity for stability. This detector is more mechanical meaning you need to dial it in cross the T's and dot the i's will bring more success with the XTPRO. Nice find dude. Pretty good considering you were in 10khz on the Gold ring.
And I have lowered my sensitivity down to 12 and I have let the X-Terra Pro tell me what is in the ground and I have since Raised it up to 18 Sensitivity Now and when I get a Jumpy VDI I know that it's a JUNK Target And Or something Relic but I only Coin Shoot and I have enough of the Simplex Relics that it told me to Dig 👎. .. and I have Since got rid of the Simplex +....
Congrats on the ring. The Minelab X-terra Pro looks pretty badass. Hard to believe it's only $269
Regarding the target ID, keep in mind each target block on the scale is allotted four numbers. Your never going to get rock steady VDI numbers on the X-Terra due to this and the unit being a single frequency unit. No update is going to change that unless it was built in to the capabilities of the hardware when designed by the engineers.
Awesome man Congrats on the Ring.. This detector is going to make some people really happy..
I’ll remember to dig 20 30 50 and minus iron signals now with my xterra 🤣 Goes to show…. My old sovereign Elite with ID meter used to just bang on Rings ,(All my best finds were with a Safari I loved that thing too The overload feature I found handy) These new machines do all sorts of crazy stuff haha I’m surprised after using the equinox how fun the xterra is for the price though.. Enjoying being able to go out again after selling all my machines (minus the heavily over priced and heavy gpz I had to take a house deposit out for) lol Btw thanks for taking the time to make these videos for everyone to watch man Awesome!
That's the best way to test a new machine, straight into action. Congrats on the ring.
I am not going to learn in a test garden!! The soil in my test gardens is surely not the same as the park soil. Thanks Pat!!
Hopefully mine gets here soon! Nice video!
FYI, gold ring is @ 7min mark. Congrats on the find. Happy hunting.
Nice find brother !!!
Saweet gold ring! Got my XT Pro coming in on Tuesday, hoping the stock coil gets some decent separation until the 8x5" coil is available. Maybe I should just go with the 6" Nox coil?
Nice 👍
What would you choose for all purpose metal detector, Vanquish 540 or X-Terra Pro? If possible make a comparison video. Thanks.
The Xterra has a huge handgrip that makes for a very uncomfortable hunt after a couple hours. The Vanquish has multi and has an S shaft. Vanquish is much much more ergonomic.
Heck ya! I can’t wait to see what the master of metal has to say about this machine!!!
Thanks for sharing some footage of the xterra pro, ive had the legend about a week and loving it so far! I had to pull the triger with it being $150 off.
Great to hear! The LG24 coil works great in parks.
@@PaystreakSuperfreak I'm sticking with stock for now, but will definitely be looking for a lg24 and sp24 sometime in the future!
Where did u find that deal?!
I've been watching others hunting with that machine saying the tones sound bad if they're very deep, but once the target is out, it sounds great and totally different. But I bet it won't take you long to get the machine dialed in, the pitch was sounding better to me also, congratulations on the gold brother 👍🏼
The huge handgrip is just a dealbreaker for me. Swinging fast with the Xtera Pro is a no go!!
Yes yes my friend .s xterra pro for elliptic coil 👍👍👍perfect test for my !❤❤❤❤
I keep reading once you get the right settings dialed in that it is a beast. I also heard that beach mode is secret multifrequency on this detector that minelab is hush about
I thought it was multi frequency at first. It gets a lot of EMI in beach
I think this will be one of the best selling detectors of all time
You would be surprised how many people buy the cheap Bounty hunters, besides the stock coil on this is too big for a lot of people including me. The coil Paystreak is using cost as much as the detector.
Nails? I have never dug a nail wth the X TERRA PRO
or any other Minelab VLF that didn't have coin in the same hole.
Can't help but question the motive of you posting these videos.
Little late, but I hunt a freshwater swim area that has bad soil. Years ago I brought a rock home. learned it was a hot rock. When I hunt that area I switch to beach mode 1 or 2. I accept everything above 0. I use 5 tone. It's locked in a 8 Khz and seems gets rid of most chirps.
Those hot rocks and cold rocks can be buggers. Happy hunting and good luck Charles.
x-terra pró! 🎉 💍👏👏👏
Yes !!!!!! Congrats 😊..GOLD 💥💥💥
Congratulations on the little gold ring ! That little coiltek coil is forsure a sniper coil for cherry picking coins and it will definitely hit on the smaller gold jewelry!! I have it on my 700 and it picks apart parks it doesn't miss much but maybee for some deeper targets. Anything in the 1-7 inch range it doesn't miss it will hit past the 7 inch mark thow..!! Good luck and happy hunting ! ✌️✌️✌️✌️✌️✌️✌️✌️✌️✌️✌️✌️✌️✌️✌️✌️✌️
A gold on your first hunt with your new machine! That’s like playing your first slot machine after arriving to the casino and hitting the jackpot on the first pull.. 😆 Congrats!
Pretty much!
I'm surprised you find anything with how fast you swing that detector
The detector these days have very very fast processors. We find lots and lots of rings, jewelry, coins and gold swinging fast. Just gotta train your ear to the tones.
Gold fever is real! Nice hit!
Congrats on the ring. Did I hear some that gourmet food escaping.
You did hear correct. Gourmet food has it's drawbacks too!!
cool dig, just stabbing in the iron signal dirt until a ring pops out
Single selectable frequency machine ,now that sounds familiar where have I seen that before 😮😮😮😮
So far every video I've seen on this machine has the initial comment "wow the numbers and tones are all over the place". It seems to be a little unstable for most people. I predict an update coming soon. It seems to me it's having a problem with anything oddly shaped, like a gold ring on edge. 😆
The numbers are all over the place. It does not like my soil in 6 out of 7 parks/schools I have been to in the last 2 days. Hopefully Minelab will come forward with an update to get through the harsh soil and stabilize the numbers.
But not everyone can be able to get the Full Sensitivity without any kind of Ground Feedback and that's what is Happening with the X-Terra Pro it's Pretty Powerful Detector that can be lowered and still getting Targets and I have lowered mine at 12 Sensitivity and I was getting Targets in the 6-8 range and Swing Speed 3 And I know that it's not the Deep Settling but I swing pretty fast and I can change it up for what I like to get but the Simplex and it's 3 Tone's High Medium and Low Tone 🤣🤣🤣🤣🤣......
@@Winteriscomn Yes it's a Updateabile and the update is Not Necessary for the X-Terra Pro to work and I have lowered mine to 12 Sensitivity and until I got use to what it was telling me about the target and I have seen some people that are expecting it to and All Detector's to be able to do the Full Sensitivity without any kind of Ground Feedback and that's why the Jumpy VDI is Happening with the X-Terra Pro and Even when I was using the Simplex + , I was on 3 bars and it's going to be Site Dependent on how much Sensitivity you need to get the targets and I have since Raised the Sensitivity up to 18 now and I understand the Jumpy VDI and it's occurs when it comes to a Junk Target And it's amazing how much it knows and doesn't necessarily need a Update......
Hey my friend .
I'll be keeping an eye on your thoughts about this one. Hope your doing great👍
Thanks for the visit!! I think it needs a software update to attenuate the iron falsing.
Congrats on the gold ring! It will be interesting to see how the signals change over time as you get more experience with the machine and are able to get it dialed in in your mineralized ground. Cool find.
Fingers crossed!
Cool. Deus definitely finds gold
yep
Congrats on the gold!
Thanks Kevin!!
You sure move your mine detector fast on the ground. Is that normal? Can you find things quicker that way?
Congrats...!!! How about beach mode with your crazy soil.
I did try beach program for about 30 minutes. Field was performing the best. It almost sounds as if beach program was running multi frequency.
6:35 Here the golden ring stood upright, the sound stopped 7:05 yes
Gold sovereign's come up good but that ground your on is like butter lucky buggers I wish.
The ground turns to concrete in the summer here. We found lots of jewelry in this field.
@@PaystreakSuperfreak yer got gold here as well British sovereign's . Nuggets size of thumb nail in pure iron ore drop a magnets down unreal.
A terra virada, bateu tom de ferro. Lembra o que te falei?🇧🇷
Does the vdi change every time you are in a different frequency or mode.
Is it different numbers to learn . I know a nokta impact has a normalization setting so v di is constant through all modes and frequencies
👍🏼
Idk why you expect a steady VDI on junk especially foil
That was the first hour using that machine. I have no expectations
Awesomeness
What coil is that?
10x5 Coiltek
Old xttera 705, 305, 505, 50, 70, much better minlab going backwards,
So how do you like it better then the simplex?
Xterra has a tone break and has more tonal options. But the Simplex hold it's own. The Simplex has a much more comfortable grip!!
can you tell me what are your settings on every thing in the menu?
Field 1, all metal, 10khz, 0 tone break, 3 recovery speed.
@@PaystreakSuperfreak Thank you man!
What digger do you use?
Whites Digmaster and the Predator model 85
@@PaystreakSuperfreak thank u... doesn't look like they are in business yet
Another reason to dig the junk .. that ring sounded junky at best!!
Yes it did. Gold sounds junky
Rings are simply luck if you pass over one. No rym or reason for where they will be. You can hit high traffic areas but as I have done for the last month I have pounded the high traffic zone at the town soccer field. Not a single ring. Even a costume junker. Nothing. I was tired the other day so I moved out to the middle section that's just grass not where they play soccer or sit. Just a big grass area. Only a target every 6 to 10ft. BAM I hit an 8 gram gold ring! No reason for it to be their. It's nothing like gold nugget hunting. Where you can raise your odds and look specific where the gold should be. Rings are just where they where lost. Could be 2 ft from the parking lot....could be in the middle of the park. Today I pounded the same soccer park for 4 hours. Over 200 targets dug. 98 coins total and the rest pull tabs and can slaw. One costume ring in all of that. You just never know when the gold gods will get you over a ring. Dig dig dig and keep on digging. I have probably dug over 1000 pull tabs and pieces of can slaw in the hundreds to. Then I hit the 8 gram gold ring and it rang up with a 42 VDI on the Legend which I though would be a zinc penny. Who knows!
Gold rings are luck just like you said. Usually spots that have more junker rings have better chances that one may be gold.
you swing that like a mad man. slow down and calm down.
I found that gold ring that weighed 7 grams....swinging fast. YES I AM A MADMAN!!
Xterra or Legend?
Legend by far!!
@@PaystreakSuperfreak Thank you. I now bought one with LD24 coil... let's see what it brings tomorrow. 🙂
You swing deus fast!
Deus likes a faster swing speed. Minlelab does not like fast swing!!
what coil you used?
Coiltek 5x10 nox
Slow the swing with that or u will miss loads
Jewelry is near the surface!! I am not trying to go super deep. I find many many rings every week with my fast swing.
From the videos I've seen so so far, the 705 is a HUGE winner over this,,yeah in this day and age.
Cha ching!
Congratulations on the GOLD 💥💥💥👨🦯
Manticore, Search Mode High Conductors, the Target Trace for gold paints a dirty picture.
Switch to Low Conductors and the Target trace for gold is nice and orderly, aluminum caps, pull tabs, and foil look great too.
Just the opposite for Silver.
I heard an iron tone after flipping the plug. The gold ring was closer to the surface, half inch deeper and that ring would of never seen the light of day. Soil masking, you either focus on shallower targets or dig the iron tones and aluminum. Brutal.
Tks!
GL👨🦯HH
Our soil has been like a firecracker the last week. The Deus 2 has been difficult to dial in also.
It's a ring, got a ring,1 inch in the ground,why did target) give a iron reading,was GB set wrong😮
Sweep speed stupid.
Good target surface.
Total luck of the draw find.
Highly mineralized soil. I find many many rings with my stupid swing speed.
Congrats on the Gold, J!