I think it might a good idea to perform this while the bed is hot at 60°C since materials expand with heat. I believe it could be more accurate vs running the bed level on a cold surface.
Hi Dennis, Great video I have just bought a pad today and installing it on my QQS-Pro, can you please make a video and explain the A,B,C,D,and E ??? I have no idea what these mean and what relation they have to the chip or even which printer they need to be assign to if that makes sense. I do not know if I should select abide and select any of them to a port ??? can you please help here. Also The TF card reader is recessed into the plastic pad that you cannot press it in or retrieve it and when you do get it in the pad will not read the Gcode file just put onto it ready to print ??? maybe 2 videos here lol. Many thanks for your help. Maybe you can pass this onto FLSUN, when manufacturers release products they need to supply instructions that make sense to the masses, if it was not for people like yourself a lot of us would be frustrated with this stuff not working out of the box. Many thanks again look forward to more videos. Wayne
Thanks Denis, you are the first one to make such video training very usefull. I love your holder too. If in case you will make the STL available.... Cheers from France too and thanks for your answer on facebook this morning regarding the PADS with SR...
Hallo thank you for the video. The bed levelled mesh is stored in memory or it has to be done each time the printer is turned on? It is possibile to store different temperature levelling profiles and than recall them directly (in case different materials are used sequentially)? Compliments for the holder... if you fan share a link for the stl it would be great. I have a SR: any special suggestions for the Speeder Pad installation? Thank you in advance Riccardo
Hi your info is so valuable. Thanks so much. I'm having one problem that I can't find addressed in your videos or I wouldn't bother you. After I get my brim or skirt or even raft down, the extruder is far away from the build plate. It's like it's missing a gcode that tells it to lower to start the actual print. I've lost so much filament forgetting to run and lower the extruder really quick. Can you help me with this sir
hello sorry, I wanted to ask something, because on all the videos I understand what you did you see the bed leveling then the bed mesh and then adjust the Z offset. On many documents they report that Klipper does not save the mesh if the Z offset is not done first. Does the speeder pad work differently than the standard Klipper?
I think it might a good idea to perform this while the bed is hot at 60°C since materials expand with heat. I believe it could be more accurate vs running the bed level on a cold surface.
Thank you
hello , love you pad's ""holder "" is it possible to have the STL please ? reggards fron france
Hi Dennis I just realized that your screen was mounted to your V 400 how did you do that is that a printable bracket ??
I was just gonna ask the same thing. If possible we can get the stl for that pad holder. Thank you 👍
Hi Dennis, Great video I have just bought a pad today and installing it on my QQS-Pro, can you please make a video and explain the A,B,C,D,and E ??? I have no idea what these mean and what relation they have to the chip or even which printer they need to be assign to if that makes sense. I do not know if I should select abide and select any of them to a port ??? can you please help here. Also The TF card reader is recessed into the plastic pad that you cannot press it in or retrieve it and when you do get it in the pad will not read the Gcode file just put onto it ready to print ??? maybe 2 videos here lol. Many thanks for your help. Maybe you can pass this onto FLSUN, when manufacturers release products they need to supply instructions that make sense to the masses, if it was not for people like yourself a lot of us would be frustrated with this stuff not working out of the box. Many thanks again look forward to more videos. Wayne
Hello Wayne, contact me on FB Messenget and I can help...
Dennis G. Gignac
How is input shaping done with a sensor? Could you do a video on that?
FLsun is working on a sensor that will work with their new Pad...
Subscribed 👍🏽 can’t wait to get my V 400
Thanks Denis, you are the first one to make such video training very usefull. I love your holder too. If in case you will make the STL available.... Cheers from France too and thanks for your answer on facebook this morning regarding the PADS with SR...
Thank you for the kind words...
Send me your email address and I will send you the STL files for that holder...
Hallo thank you for the video. The bed levelled mesh is stored in memory or it has to be done each time the printer is turned on?
It is possibile to store different temperature levelling profiles and than recall them directly (in case different materials are used sequentially)?
Compliments for the holder... if you fan share a link for the stl it would be great.
I have a SR: any special suggestions for the Speeder Pad installation?
Thank you in advance
Riccardo
Thank you for the kind words...
Contact me on FB messenger to talk more directly...
Hi your info is so valuable. Thanks so much. I'm having one problem that I can't find addressed in your videos or I wouldn't bother you. After I get my brim or skirt or even raft down, the extruder is far away from the build plate. It's like it's missing a gcode that tells it to lower to start the actual print. I've lost so much filament forgetting to run and lower the extruder really quick. Can you help me with this sir
hello sorry, I wanted to ask something, because on all the videos I understand what you did you see the bed leveling then the bed mesh and then adjust the Z offset. On many documents they report that Klipper does not save the mesh if the Z offset is not done first. Does the speeder pad work differently than the standard Klipper?
On my flsun v400 on the speeder pad is klipper has shutdown and also mcu shutdown adc out of range. I dont know how tix that