I've driven these trucks along with canters for years in the drilling industry. Reliable and somewhat fuel efficient. Only thing worth mentioning is handbrake, brakes etc wear out quickly and are pain to adjust. So steady steady. Check the rubber bungs on brake drums are always in place. Bring couple spare. Dust ingress through the flex of the big doors (NPS) I'd definitely take one over 79 series for touring around country. Smart choice. Good rig mate
Thanks, like you I have driven a few of these yeh and canters, guiding across the top end! I tend to use exhaust brakes and gears as much as possible( and your advice is valid for sure. They are big on mine sites indeed. We went isuzu over iveco after a lot of research indeed. Ta
2:29 WHAT!....WHAT!.....WHAT!.....😱🤯💪👍🛠 GREAT RIG!.....They are building next level rigs. No wonder you had your incredible truck built by them. 🌞😉🤔👍 7:38 what about water crossing would that electrical short out?
It’s a good question haven’t had any drama yet, and some water up a metre. But I was thinking about this the other day. And yes the rigs are next level we have still more to do but we ran out of $$$$. We will get there slowly!
do you know if you can tweek or do stuff to the engine for more power and if you can enhance the motor can you tweek the transmission too. with your truck what gears are you running. eg. highway, hills or low pulling gears. is that an option offered from your builder.
Yes you can have these remapped for better response power output. About $1000. We haven’t done it but we will in the future. They are a bit sluggish but we in no hurry.
You can mod these in so many different ways , this is close to $200G. More to do to it. And I payed for every part of build. Others do bits themselves. But we love it.
@Adsventures I'm really happy for u.! In my part of the world, ciz of the collapse of our currency, this is the price of a 300 sqm apt in a good area in Cairo.! U have also vast areas in ur country to explore.! Enjoy to the maximum.! 😊
It all depends on the specs you want built into it and if you pay everyone to do it all . If you are a fabricator boiler maker sparky you can save a lot $$$$. Metal is expensive and tradies charge max prices. It all depends what you want to do with the truck.
![SEXY Custom Peterbilt 379 | Hauling Oil in Style | CAT Power | American Truck Simulator [4K]](http://i.ytimg.com/vi/cR44c6nB_2c/mqdefault.jpg)
I've driven these trucks along with canters for years in the drilling industry. Reliable and somewhat fuel efficient. Only thing worth mentioning is handbrake, brakes etc wear out quickly and are pain to adjust. So steady steady. Check the rubber bungs on brake drums are always in place. Bring couple spare. Dust ingress through the flex of the big doors (NPS) I'd definitely take one over 79 series for touring around country. Smart choice. Good rig mate
Thanks, like you I have driven a few of these yeh and canters, guiding across the top end! I tend to use exhaust brakes and gears as much as possible( and your advice is valid for sure. They are big on mine sites indeed. We went isuzu over iveco after a lot of research indeed. Ta
That’s absolutely awesome! Great work!
Thanks matey I will be watching more of yours today! I see you put a new one up!!!
@@Adsventures Great content! Appreciate it! 🙏✨
Yes they are great little trucks I have one and I’m very happy with it just subscribed for the adventure to come cheers 👍🍻🇦🇺
Thanks for that, we have plenty
Of stuff going on. And yes lots of video to start editing agahaahah
2:29 WHAT!....WHAT!.....WHAT!.....😱🤯💪👍🛠 GREAT RIG!.....They are building next level rigs.
No wonder you had your incredible truck built by them. 🌞😉🤔👍
7:38 what about water crossing would that electrical short out?
It’s a good question haven’t had any drama yet, and some water up a metre. But I was thinking about this the other day. And yes the rigs are next level we have still more to do but we ran out of $$$$. We will get there slowly!
Awesome set up
Thanks a few things to go get, and a few things we haven’t revealed to too many on the set up. Been on the road for a few months now.
That was great to watch
thanks
Traigalas y las venden en Colombia!
Tienen mercado asegurado
Congratulations
Thanks been hard work to get this.
do you know if you can tweek or do stuff to the engine for more power and if you can enhance the motor can you tweek the transmission too. with your truck what gears are you running. eg. highway, hills or low pulling gears. is that an option offered from your builder.
Yes you can have these remapped for better response power output. About $1000. We haven’t done it but we will in the future. They are a bit sluggish but we in no hurry.
Yea baby , good onya bruza 😂😂😂
You must have one too!!!!
do you sell the locator nuts. for za 2017 mitsubishi/fuso cantor 4x4
Does the Fuso have either an exhaust brake or Jake brake?
no idea
What is the price of such an amazing truck??
You can mod these in so many different ways , this is close to $200G. More to do to it. And I payed for every part of build. Others do bits themselves. But we love it.
@Adsventures I'm really happy for u.! In my part of the world, ciz of the collapse of our currency, this is the price of a 300 sqm apt in a good area in Cairo.! U have also vast areas in ur country to explore.! Enjoy to the maximum.! 😊
How much for one of these beauty's???
It all depends on how big you want to go with set up , suspension etc . This is close to $200 g!
@Adsventures thankyou I would like to set one up for camping one day I've these rigs
Can these trucks be imported to the usa? Where can I get one? Do you guys sell them or only work on them?
Im not sure on that
dont you know how to focus a camera it is blurry
You drunk again?
$200,000
It all depends on the specs you want built into it and if you pay everyone to do it all . If you are a fabricator boiler maker sparky you can save a lot $$$$. Metal is expensive and tradies charge max prices. It all depends what you want to do with the truck.
Not clean and shiny like that any longer!!!
It sure isnt
Good rig?
🚌. mobil