Samsung(Model DW80CG4051SR) dishwasher install
Вставка
- Опубліковано 30 гру 2023
- In this video I remove a Maytag dishwasher and install a Samsung DW80CG4051SR. l come across something l have never seen before on this install but I cover material, tools and how to navigate the challenges.
Like and subscribe!!
Amazon affiliate links
This post includes affiliate links for which I may make a small commission at no extra cost to you should you make a purchase.
Dishwasher water supply line+both styles of 90's.
amzn.to/46gIEWz
Compression/pex adapter(To transition from pex to threaded)
amzn.to/4bxJCP5
Rachet wrenches
amzn.to/3YdZkf3
1/2 Close quarter crimpers
amzn.to/3WcJFu6
Wire strippers
amzn.to/3Wdermv
Voltage tester
amzn.to/4fgxaGD
LED work light
amzn.to/4fbCJGc
Milwaukee cordless drill
amzn.to/3YbGyoE
Pex cutters
amzn.to/3YeE7Su
Channel lock pliers
amzn.to/4bSGGN1
6"Crescent wrench
amzn.to/4f6xXd7 - Навчання та стиль
Thank you. Im putting mine in tomorrow.
Good luck sir!! If you have any questions dont hesitate to ask!
Great Stuff! I just did mine and was hoping to find out how to attach the front trim piece below the door.
I believe you are refering to the bottom trim plate. This plate has 2 screws that fit into slots to hold it on on the ends. The screws are either 2 phillips or plastic slot screws.
Check out this video at the 3:57 mark, you will see the slot on the left side. Please let me know if you still need help
#QTOW# Leaking dishwasher drain repair
m.ua-cam.com/video/Hc5O0ogij1c/v-deo.html
@@HomeownerDIY Bingo!
Got it - thx
Is it possible to side mount the mounting brackets? I've got a stone countertop and I'm having trouble figuring it out, I don't see slots for it
Thanks for your question,instructions says yes you can go through the sides.
Have you tried to use PL construction adhesive to glue pieces of plywood to the underside of the countertop?
This was a very common method used in construction for undermount sinks.
I am installing a similar Samsung dishwasher and It appears the dishwasher controls on this model are on top of the door. If I push it into the cabinet so that the rubber seals along the left and right sides are even with the cabinet front, then the controls are hidden under the counter top. Is this normal? If I pull it out so that the controls on top of the door are showing then the seals are close to 1" in front of the cabinet front!
Is this normal and are the controls supposed to be operated while the door is open and then shut?
Thanks for your question, is there enough room for your fingers to operate the buttons with door closed when the unit is pushed back?