Regarding the cornstarch as thickener: Did this today and it was a success. Mixed 1 tablespoon of cornstarch with 100 mls of water (a little less than 1/2 of a cup as 100 mls equals 0.42 cup) and microwaved for a total of 90 seconds. Mixed it in a glass pyrex measuring cup and had to stop the microwave to stir a few times in that minute and a half to keep it from bubbling over. Let it cool and thicken then stirred in 1 tablespoon of Ammonium Chloride. Used a paintbrush to brush a nice thin coat over the vinyl stencil covered wood. Let it dry thoroughly, removed the stencil and hit with the heat gun. It turned out beautifully!
@@amyschmitz2138 I think the thickness keeps it from seeping underneath your stencil! Yet, it was still able to be brushed onto the wood in a thin even layer. Try it with more water to get a thinner consistency but be aware that too thin may bleed under the stencil.
I tried with corn starch for the first time (also my first piece). Still bled under the vinyl. Used 1 ibsp ammonium chloride, 1/2 cup warm water, and 1/2 tsp corn starch. Still bled when I heated it. Consistency still seemed watery. Ordered Thick-It, just waiting on it to arrive. Measurements with the corn starch are obviously wrong, just wouldn't get thick. Any additional suggestions? I initially added warm water. It got cool so I stuck it in the microwave for 45 seconds (water was stil slightly warm) things began to pop, so I removed from microwave. And, is this reuseable at the right consistency? TIA
Man I’m so happy I found you. So many people I watch 1. Takes forever explaining how to do it 2. Talks and reads out comments or keeps saying hi to people 3. Talks to family members. 4 shows their kids or animals 5. Think they have to be funny or goofy. Your great. You get to the point. And explain things every well. Thank you!! ❤
I agree. I went through many videos that were overly chatty and not getting to the project. It was driving me mad. He explains what needs explaining and doesn't waste time. - Jessica
You, sir are a natural born teacher! Not sure how I found you, but I'm sure glad I did! I just subscribed and can't wait to see what else you'll teach me. ❤❤❤❤ Thank you so much!
Thank you for this tutorial! You are a very good teacher, clear and detailed instructions. For those who know the vinyl cutting process at 13:59 he explains the wood burning mix and application.
Just me sitting here without any type of cutter or cricut hahaha watching these videos because it looks like so much fun & your personality is so lovely ☺️
it does look very fun and everything works so smoothly for those making the videos but what they dont show is all the wasted supplies and screw ups made learning to get it right. some things with my cricut maker are very easy and fun, other things are frustrating and heartbreaking when you work for hours on a design only to have it mess up somehow and now youre out of materials and have no money for more till payday. so if you are wanting to get one be sure to shop your butt off for the cheapest priced but good quality materials and tools. the machine isnt the expensive part i promise. i do have to note that dollar tree now sells cricut type tools and materials which are decent quality and great for practicing everything before spending $15 on a 48" roll of cricut brand premium vinyl. also, get extra mats, like alot of mats.
@@kendrahawthorne8427 I have heard that the Silouette Cameo is easier to calibrate and that you don't have to waste as much material trying to get everything just right. I am trying to determine which brand to buy. Have you any input? Thanks!
I appreciate how you teach. You are clear, to the point, & pleasant. I love how simple this wood burning technique is. I have learned something new & useful today.
HINT: When you change the kerning on the font by ungrouping, Hold down the shift key while sliding the letters over and it will help it stay in alignment with the other letters.
THIS WAS ABSOLUTELY AMAZING - THANK YOU FOR SHARING YOUR SKILLZ - ONCE AGAIN!! THANK YOU, MR. CRAFTY PANTS. I THINK I CAN SPEAK FOR EVERYONE HERE AND SAY, "WE ALL LOVE YOU!!!"
You just taught me how to contour! Thank you so much! I was wondering how to remove things from a premade design. I love all of your videos. Absolutely the best.💖
I'm so excited to have found your channel. I received my maker 3 for Christmas. You will be vital in my learning, exploring, and crafting fun!!! This is great and I'm so excited!!!!
Thank you! I finally understand how to make a reusable stencils for wood burning. I have two questions: 1. How and where do you store the stentils and 2. What do you clean it with?
Totally new to cricut and you are mentioned by so many people. They are not wrong you are so knowledgeable but also explain things in a way that newbies understand. Can't wait to watch more. This was fantastic. I'm blown away. Thank you 💕
OMG - I cannot express how grateful I am that you are so clear and literally prep us with what material we need before even starting the process. I'm so excited to make something and just bought some wood pieces .... I need to go and order all that good stuff so I can start my projects. You are amazing! Thank you, thank you!
I just got my machine and after seeing you on UA-cam, I want to do everything…. Right now! Not enough time in the day to accomplish all you’ve inspired to do. Thank you. Love it.
You’re as good as it gets! What a great instructor. Thanks for all of the hundreds of details per video that you shared to make everyone’s life easier. Hope you make that money!
You know you are a very special person when you can change a person's day with just your smile and personality (and on a video at that)! I've been having a blah kind of day, nothing going right and was just kind of down (not normal for me). Watched your video this afternoon and it instantly improved my mood! In a much happier place now. Oh, and your project was awesome! Thanks for sharing!
Hello Michael. I've just found your channel. I live in the UK and run a small pub business. I try to be as 'crafty' as possible when it comes to signage and posters for my business. It's probably the same in the USA, when it comes to getting some things printed etc, it can be costly. I've just purchased a Cricut Maker 3 - having had a Cricut Explore for quite some time. I will be looking to make some wooden cut outs and cardboard lettering for an upcoming Gin Festival we're holding from 7th - 10th July. My time is running short therefore any equipment that makes my life easier is a huge benefit to me. I wish you well and I will be exploring your other videos for tips and ideas. Cheers for now x
OMG, I've had this old Hello Kitty cutting board, that has been destroyed over the years, and I've been dying to recreate it. I had NO IDEA this was a possibility! I'm so excited to try this out!
You are amazing! Great tutorial, easy to follow and I like that you got to the point immediately. Will be looking forward to watching more of your tutorials. No crazy loud background music, just pure teaching, great experience! Thank You!!!
That is super cute!! I love how you explain everything and why you need to do each step. There’s nothing more annoying than trying to do a project and being told what to do, but not understand why and not have it help you in the long run with other projects. Thanks for being very clear in your instructions!
I’m so new with this Cricut cutting thing and I’m old so much slower to learn new things so I absolutely love your teaching video’s. Thank you so much for all of your help!! ❤
I want to say I love that you are learning and trying out new things. I think it's a beautiful expression of soul and humanity when we are able to keep the curiosity and ambition we felt as children through our lives. I know so many people who are intimidated by the technology or have that fear of failure so they don't even make an effort. I just wanted to tell you that your comment sparked joy in my soul for you. Don't give up. Soon enough you will be able to make it look effortless. May you be met with blessings on your journey. - Jessica
This is brilliant. I had my doubts about getting a consistent wood burn on items (as I'm just starting) and this is getting me off my rear and into crafty mode. Thank you!
Hi! I just wanted to tell you! I had tried chemical pyrography before and was seriously disappointed, but after watching your awesome video I decided to give it another try using all your tips and tricks and I am SO HAPPY with the results! Thank you so much for all your help! You ROCK!
My husband just bought me a Cricut and I love your video! You explain things so clearly and I am very thankful for the visual indications explaining how to make changes to the images with the computer program. As a beginner to the program, and a visual learner, the arrows showing the location of each button were a huge help. I have always loved woodburning and you just introduced me to a new way to try it! Thanks!
Thank you, Michael! I love your videos! There are a couple of questions. 1. Do you wait for the solution to totally dry before removing the vinyl from the wood? 2. Depending on the answer to question 1, should the solution be wet or dry when heat is applied. I apologize in advance if you taught that and I simply missed it.
So I was about to text you all the hidden words until I realized this video was from last year lol I found your channel a few months ago & watch every video. Love it! Thanks for all your peoples hard work & tips!
Thanks for all of the great videos and many exciting ideas. I am soooo looking forward to trying my Circuit. Please keep creating these great tutorials.
First of all, I’m so sorry I’m just now seeing your comment. Secondly, thank you so much for your kind words and generosity! It is greatly appreciated ❤️❤️❤️
This is my first time seeing your videos and I love how you show every step of the process. It made the project instructions so clear. You will definately be my first choice go to videos for help and ideas!
Hey! LOVE this tutorial! My question, is there a way to make re-useable stencils? Or does it pretty much need to be printed every single time? Like if I wanted to do several of those cutting boards, do I have to repeat the process each time? Just curious if there is a hack to making 5-6 of them at a time....thanks for reading!
I looked at this video cause my wife was getting a Cricut. I ended up watching the whole video cause mr crafty was so in depth and descriptive through the video. Good video 👍👍👍
Completely agree. I normally skip past many parts of videos getting snippets of what I'm interested in. Somehow this guy "made" me watch this entire video from beginning to end without skipping at all. @Mr. Crafty Pants - What kind of voodoo is this??? Great job!
Gotta say, I stumbled on this video and really enjoy it! Your voice, your instructions do NOT get on my nerves! Very well done! You may have saved me thousands of dollars by not buying a laser cutting/engraving machine!!!
SIR. SIR. YOU SAVED ME!!!!! I was making wood burned cutting boards for my boss and could not get the transfer tape to remove without tearing. Your transfer tape recommendation is the only thing that made it happen. Thank you so so so much!
Absolutely loved your video! Can’t wait to do my first! I have a few questions....you talked about washing the board off, when do you do that? Do you finish off by using some type of sealant or none?
I’m interested to know this too. I’ve had a go on unfinished wood and it worked great. But now I need to finish my wood, not sure whether to do it before or after??
@@sarahellis3675 It all depends on what you're using it for. If you're making a charcuterie board, you should use a food-grade mineral oil on both sides, let it dry (preferably over night) and wipe off the excess before using. If you are making a cutting board, use food grade and unboiled Linseed oil. It'll create a food-safe and a sort of plastic-like material on the cutting board to protect it and makes it easier to maintain.
This is my first time seeing this type of project, and I am absolutely amazed by it! You made it look so easy. Going to give it a shot, hopefully it turns out as good as yours did. Love it!
This is very creative. I love it. I will upgrade my machine as soon as I have the money to do so. Love it love it. So cool. Thank you for sharing this info. 😀
I love your channel! I love arts and crafts and even though I am not doing this or anything today, it was a pleasure just learning this from you! This is therapy! I really enjoy how you explain everything and I am pretty sure that this coming weekend I will be buying everything to do this kind of projects! Thank you and keep up your great job! Thumbs up!
So glad I found your site. You are talking about the major concept I have been looking for with other solutions for a hobby that I could get into. I look forward to view more of your sessions.
This is such a cool project!! I have had a Cricut for years...collecting dust in my office. I am so excited to try this. Thanks for your inspiration and easy-to-follow instructions. I really enjoyed watching! Stay crafty. :-)
When you're done with the heat gun piece, do you have to wipe down the wood or anything to get any remaining thick-it/ammonium chloride solution off???
@@jessibpower im in New Zealand and trying to find the Ammonium do you know if there is different stuff? only place i can find it is at a horse place? also is it food safe or a good wash afterwards gets all reside off? Cant wait to try this
I absolutely love this project! Thank you so much for showing us how to do this! I can't wait to try it! I do have one question. How long did it take for the solution to dry for you to be able to remove the vinyl from the board and begin to use your heart gun to finish it?
Love the video and can't wait to try making some projects like this for my family for Christmas and Birthdays thanks again you really make it easy to understand what to do and how to use the cricut machine
This is amazing! Can’t wait to start making Christmas gifts! Question: how do you seal the boards for use after you’ve finished burning the wood and washing the board?
Amazing videos! I have a question: How long does it usually take this mixture to dry on your piece? My wife is in the middle of this project and we don't know how to tell if it's 'dry'.
It takes 30 minutes to dry. I realize this is a delayed response, however if you haven’t started your project yet…. I thought it would be helpful to know!
i so loved this tutorial please keep the wood craft lessons coming. however i do have one question as to why make so much solution when you only need a thin layer? im waiting on my cloride to come in the mail. I can't wait to try this technique
@@mrcraftypants how long does it last in the container? Will it have the same consistancy or do i need to add something once im ready to re use it? Thank you
There is also a version of ammonium chloride that is meant for treating urinary issues in farm animals... you can pick it up super cheap at feed stores and it does the same thing.
I wish I would have known about this hack when I was using an actual wood burning tool to make cutting boards to sell. It would have saved SOOOO much time!
@@mrcraftypants I will check it out. I haven't seen it yet. Will there be a cost for the course? Not that you aren't worth it, but I don't have the funds for such. Merry Christmas! 🌲
Great video and it answered a lot of questions I had. Now that you have figured out how to do food grade wood, can you tell me how to make a dinnerware set that is completely useable, microwaveable, and dishwasher safe. Thanks again!
Thank you for all you do and share with the world :). Questions: -can this emulsion/heat gun technique be used on cork trivets? -can this technique be used with reusable stencils? Or will it ruin the stencil?
A friend just sent this to me & I am now obsessed with you. I've always done woodburn the old fashioned way, since I was just a little girl. I'm not so young anymore. I have a Cricut I've had for 4 years that I've never used, just not having taken the time to learn. Now I have you & I'm SUPER excited! Thanks in advance for what you're gonna teach this ol' girl!
✨Be the FIRST to know about any upcoming Mr. Crafty Pants product launches, mystery boxes, etc. 👉 www.mcpcountdown.com
Regarding the cornstarch as thickener: Did this today and it was a success. Mixed 1 tablespoon of cornstarch with 100 mls of water (a little less than 1/2 of a cup as 100 mls equals 0.42 cup) and microwaved for a total of 90 seconds. Mixed it in a glass pyrex measuring cup and had to stop the microwave to stir a few times in that minute and a half to keep it from bubbling over. Let it cool and thicken then stirred in 1 tablespoon of Ammonium Chloride. Used a paintbrush to brush a nice thin coat over the vinyl stencil covered wood. Let it dry thoroughly, removed the stencil and hit with the heat gun. It turned out beautifully!
Thank you for this information! I am going to try it with just cornstarch before I go and purchase another thing
I tried this but I'm not sure the solution is correct. It is like a gel/booger consistency
@@amyschmitz2138 I think the thickness keeps it from seeping underneath your stencil! Yet, it was still able to be brushed onto the wood in a thin even layer. Try it with more water to get a thinner consistency but be aware that too thin may bleed under the stencil.
It’s so cool you took the time to give the info and details as to how to use cornstarch 😍
I tried with corn starch for the first time (also my first piece). Still bled under the vinyl. Used 1 ibsp ammonium chloride, 1/2 cup warm water, and 1/2 tsp corn starch. Still bled when I heated it. Consistency still seemed watery. Ordered Thick-It, just waiting on it to arrive. Measurements with the corn starch are obviously wrong, just wouldn't get thick. Any additional suggestions? I initially added warm water. It got cool so I stuck it in the microwave for 45 seconds (water was stil slightly warm) things began to pop, so I removed from microwave. And, is this reuseable at the right consistency? TIA
Man I’m so happy I found you. So many people I watch 1. Takes forever explaining how to do it 2. Talks and reads out comments or keeps saying hi to people 3. Talks to family members. 4 shows their kids or animals 5. Think they have to be funny or goofy. Your great. You get to the point. And explain things every well. Thank you!! ❤
I agree. I went through many videos that were overly chatty and not getting to the project. It was driving me mad. He explains what needs explaining and doesn't waste time.
- Jessica
I so agree with that.
My mind is blown!!! This is the first of your videos I've ever seen and I can't wait to burn wood!!!!!!
Ditto!
Thanks!
Thank you SO much, Eileen! That’s so sweet of you! ❤❤❤
@@mrcraftypants ... thank you (sorta) for the new project idea .. the "sorta" is because I now have yet more project supplies I have to make room for!
You, sir are a natural born teacher! Not sure how I found you, but I'm sure glad I did! I just subscribed and can't wait to see what else you'll teach me. ❤❤❤❤ Thank you so much!
Thank you for this tutorial! You are a very good teacher, clear and detailed instructions. For those who know the vinyl cutting process at 13:59 he explains the wood burning mix and application.
Just me sitting here without any type of cutter or cricut hahaha watching these videos because it looks like so much fun & your personality is so lovely ☺️
He really is a joy to watch and listen too isn't he?
That was me today as well. Lol
Haha, me too!
it does look very fun and everything works so smoothly for those making the videos but what they dont show is all the wasted supplies and screw ups made learning to get it right. some things with my cricut maker are very easy and fun, other things are frustrating and heartbreaking when you work for hours on a design only to have it mess up somehow and now youre out of materials and have no money for more till payday. so if you are wanting to get one be sure to shop your butt off for the cheapest priced but good quality materials and tools. the machine isnt the expensive part i promise. i do have to note that dollar tree now sells cricut type tools and materials which are decent quality and great for practicing everything before spending $15 on a 48" roll of cricut brand premium vinyl. also, get extra mats, like alot of mats.
@@kendrahawthorne8427 I have heard that the Silouette Cameo is easier to calibrate and that you don't have to waste as much material trying to get everything just right. I am trying to determine which brand to buy. Have you any input? Thanks!
I appreciate how you teach. You are clear, to the point, & pleasant. I love how simple this wood burning technique is. I have learned something new & useful today.
Your channel name was enough for me to subscribe. Great content!
I starting looking at videos because my daughter wants one for Christmas. However, now I want one! I’m going to watch all your videos so I learn!
HINT: When you change the kerning on the font by ungrouping, Hold down the shift key while sliding the letters over and it will help it stay in alignment with the other letters.
This only works for me like maybe 10% of the time, even though I ALWAYS attempt to do it 😔
Thanks for that hint. Learned something new today.
@@xtina22e use the boxes at the top right and they slide right and left without moving down.
@@tonimlentner1255 9th 9
you can also use the arrow keys
THIS WAS ABSOLUTELY AMAZING - THANK YOU FOR SHARING YOUR SKILLZ - ONCE AGAIN!! THANK YOU, MR. CRAFTY PANTS. I THINK I CAN SPEAK FOR EVERYONE HERE AND SAY, "WE ALL LOVE YOU!!!"
You just taught me how to contour! Thank you so much! I was wondering how to remove things from a premade design. I love all of your videos. Absolutely the best.💖
Me toooooo!!!!!🤗🤗🤗🤗 Thank you Michael!!!!
I'm so excited to have found your channel. I received my maker 3 for Christmas. You will be vital in my learning, exploring, and crafting fun!!! This is great and I'm so excited!!!!
@@sherrimotts8425 ❤️❤️❤️
Thank you! I finally understand how to make a reusable stencils for wood burning. I have two questions: 1. How and where do you store the stentils and 2. What do you clean it with?
My favorite thing you do is so clearly explain all the materials you’ll need for each project before you do it!
Totally new to cricut and you are mentioned by so many people. They are not wrong you are so knowledgeable but also explain things in a way that newbies understand. Can't wait to watch more. This was fantastic. I'm blown away. Thank you 💕
OMG I just got a Cricut maker 3 for Christmas. I was so confused how to use it till I found you channel! You have made it so easy!
Best Cricut tutorial I have seen
This looks fun. When I get a machine, I will try something like this. Thanks, you.
OMG - I cannot express how grateful I am that you are so clear and literally prep us with what material we need before even starting the process. I'm so excited to make something and just bought some wood pieces .... I need to go and order all that good stuff so I can start my projects. You are amazing! Thank you, thank you!
I just got my machine and after seeing you on UA-cam, I want to do everything…. Right now! Not enough time in the day to accomplish all you’ve inspired to do. Thank you. Love it.
I've literally found you this morning. I'm addicted, I've ordered and can't wait to get started
Love love love mr crafty pants. Best out there. will not watch anyone else. Thank you for all your help.
Problem the coolest thing I’ve ever seen done with a cricut so far. Thank you for sharing, Christine.
You’re as good as it gets! What a great instructor. Thanks for all of the hundreds of details per video that you shared to make everyone’s life easier. Hope you make that money!
I'm hooked on your tutorials! I appreciate how clearly you explain everything!
My boyfriend and I agree and were saying the same thing. Thank you Mr crafty pants 👖🥰🎉
You know you are a very special person when you can change a person's day with just your smile and personality (and on a video at that)! I've been having a blah kind of day, nothing going right and was just kind of down (not normal for me). Watched your video this afternoon and it instantly improved my mood! In a much happier place now. Oh, and your project was awesome! Thanks for sharing!
Hello Michael. I've just found your channel. I live in the UK and run a small pub business. I try to be as 'crafty' as possible when it comes to signage and posters for my business. It's probably the same in the USA, when it comes to getting some things printed etc, it can be costly. I've just purchased a Cricut Maker 3 - having had a Cricut Explore for quite some time. I will be looking to make some wooden cut outs and cardboard lettering for an upcoming Gin Festival we're holding from 7th - 10th July. My time is running short therefore any equipment that makes my life easier is a huge benefit to me. I wish you well and I will be exploring your other videos for tips and ideas. Cheers for now x
I've been having a blast learning about my new machine. This tutorial blew my mind. Thank you for sharing!
I am floored how amazing this looks and of course how easy you always make everything look! Love it!
I’m so glad you liked it, Missy!! 😊❤️
OMG, I've had this old Hello Kitty cutting board, that has been destroyed over the years, and I've been dying to recreate it. I had NO IDEA this was a possibility! I'm so excited to try this out!
I hope it works out for you! Best of luck!
You are amazing! Great tutorial, easy to follow and I like that you got to the point immediately. Will be looking forward to watching more of your tutorials. No crazy loud background music, just pure teaching, great experience! Thank You!!!
Using the lint roll while weeding is a genius idea! Definitely going to use that!
Thank you. I just ordered new vinyl. I can't wait to try it out!!!
from where?
That is super cute!! I love how you explain everything and why you need to do each step. There’s nothing more annoying than trying to do a project and being told what to do, but not understand why and not have it help you in the long run with other projects. Thanks for being very clear in your instructions!
😱 I just found you...what. I have been looking for you for AWHILE. This is the channel I've been searching forrrrr
This was so cool!!! I had no idea you could do this, every day I love my cricut more! Brilliant tutorial, very easy to follow ❤️❤️
I'm so happy to hear that Bryony Dawson
Thank you. You are an excellent instructor
I’m so new with this Cricut cutting thing and I’m old so much slower to learn new things so I absolutely love your teaching video’s. Thank you so much for all of your help!! ❤
I want to say I love that you are learning and trying out new things. I think it's a beautiful expression of soul and humanity when we are able to keep the curiosity and ambition we felt as children through our lives. I know so many people who are intimidated by the technology or have that fear of failure so they don't even make an effort. I just wanted to tell you that your comment sparked joy in my soul for you. Don't give up. Soon enough you will be able to make it look effortless. May you be met with blessings on your journey.
- Jessica
This is brilliant. I had my doubts about getting a consistent wood burn on items (as I'm just starting) and this is getting me off my rear and into crafty mode. Thank you!
Hi! I just wanted to tell you! I had tried chemical pyrography before and was seriously disappointed, but after watching your awesome video I decided to give it another try using all your tips and tricks and I am SO HAPPY with the results! Thank you so much for all your help! You ROCK!
Where did you get your ammonium chloride from
Great video! You did an Excellent job explaining and showing how to use the cricut design space for the stencil.
I love how you highlight with the arrows where your pointer is.
My husband just bought me a Cricut and I love your video! You explain things so clearly and I am very thankful for the visual indications explaining how to make changes to the images with the computer program. As a beginner to the program, and a visual learner, the arrows showing the location of each button were a huge help. I have always loved woodburning and you just introduced me to a new way to try it! Thanks!
Thank you, Michael! I love your videos!
There are a couple of questions.
1. Do you wait for the solution to totally dry before removing the vinyl from the wood?
2. Depending on the answer to question 1, should the solution be wet or dry when heat is applied.
I apologize in advance if you taught that and I simply missed it.
Yes, Wait for it to be completely dry before removing the vinyl. It will become a cloudy white cream color when it is dry. Heat when completely dry.
@@GoddessLindaLou how long more or less?
Great job, Uncle Michael! Zane loved the Santa tray. I will have to definitely try this one day. Thank you for the awesome tutorial, as always.
Zane definitely needs one of these! 😊
So I was about to text you all the hidden words until I realized this video was from last year lol I found your channel a few months ago & watch every video.
Love it! Thanks for all your peoples hard work & tips!
Thanks for all of the great videos and many exciting ideas. I am soooo looking forward to trying my Circuit. Please keep creating these great tutorials.
First of all, I’m so sorry I’m just now seeing your comment. Secondly, thank you so much for your kind words and generosity! It is greatly appreciated ❤️❤️❤️
This is my first time seeing your videos and I love how you show every step of the process. It made the project instructions so clear. You will definately be my first choice go to videos for help and ideas!
Hey! LOVE this tutorial! My question, is there a way to make re-useable stencils? Or does it pretty much need to be printed every single time? Like if I wanted to do several of those cutting boards, do I have to repeat the process each time? Just curious if there is a hack to making 5-6 of them at a time....thanks for reading!
You could get stencil material but not sure how you'd get it close enough to where it wouldn't bleed
I use mylar sheets to make re-usable stencils. They're readily available on Amazon I use spray mount to keep the m in place.
I looked at this video cause my wife was getting a Cricut. I ended up watching the whole video cause mr crafty was so in depth and descriptive through the video. Good video 👍👍👍
Completely agree. I normally skip past many parts of videos getting snippets of what I'm interested in.
Somehow this guy "made" me watch this entire video from beginning to end without skipping at all.
@Mr. Crafty Pants - What kind of voodoo is this??? Great job!
I'm brand new to Cricut! You are delightful! Can't wait to watch your next video!!!
You’ve obviously been around a long time … why haven’t I found you until now !!! I love how you explain and go through the process!!
Just ordered my cricut, and THANK YOU for making this so simple to understand!
Can I just say you are 10000 times more likable than the “Makers gunna make” people. Subscribed and thank you!
Both are amazing
Gotta say, I stumbled on this video and really enjoy it! Your voice, your instructions do NOT get on my nerves! Very well done! You may have saved me thousands of dollars by not buying a laser cutting/engraving machine!!!
What you did is incredible. I have never seen anything like this before. Thank you!!!
This is the first video I have seen by you. You speak very well and I enjoy learning from you!
Thank you so much!! 😃
SIR. SIR. YOU SAVED ME!!!!!
I was making wood burned cutting boards for my boss and could not get the transfer tape to remove without tearing. Your transfer tape recommendation is the only thing that made it happen. Thank you so so so much!
I’m so glad it’s helped!!! I love that transfer tape so much!
I am running into the same issue, what brand transfer tape is this??
Absolutely loved your video! Can’t wait to do my first! I have a few questions....you talked about washing the board off, when do you do that? Do you finish off by using some type of sealant or none?
I’m interested to know this too. I’ve had a go on unfinished wood and it worked great. But now I need to finish my wood, not sure whether to do it before or after??
@@sarahellis3675 It all depends on what you're using it for. If you're making a charcuterie board, you should use a food-grade mineral oil on both sides, let it dry (preferably over night) and wipe off the excess before using. If you are making a cutting board, use food grade and unboiled Linseed oil. It'll create a food-safe and a sort of plastic-like material on the cutting board to protect it and makes it easier to maintain.
Just love this so much!!! ❤️ You are so thorough when you teach!! I can’t wait to try this!! Thank you so much for sharing your talent with us.😉
This is my first time seeing this type of project, and I am absolutely amazed by it! You made it look so easy. Going to give it a shot, hopefully it turns out as good as yours did. Love it!
This is very creative. I love it. I will upgrade my machine as soon as I have the money to do so. Love it love it. So cool. Thank you for sharing this info. 😀
I learned something new today. It was amazing
You make this look so easy loving all the things you can do with a cricut so excited to get started
I love your channel! I love arts and crafts and even though I am not doing this or anything today, it was a pleasure just learning this from you! This is therapy! I really enjoy how you explain everything and I am pretty sure that this coming weekend I will be buying everything to do this kind of projects! Thank you and keep up your great job! Thumbs up!
It's like magic! Thank you for sharing! Your teaching is so clear and inspiring!
Excellent. Thx for sharing the steps. Watching from Ontario Canada 🎉
So glad I found your site. You are talking about the major concept I have been looking for with other solutions for a hobby that I could get into. I look forward to view more of your sessions.
I’m so glad you did this tutorial. I’ve never seen this done.
You seriously make everything look so easy! Thank you for explaining things so well. I can’t wait to try this!! 🎄
This is such a cool project!! I have had a Cricut for years...collecting dust in my office. I am so excited to try this. Thanks for your inspiration and easy-to-follow instructions. I really enjoyed watching! Stay crafty. :-)
Thank you! I love this. It’s June 30th and this can be used all year. So cool!!!
Oh my gosh, great video!! I never thought of using a lint brush to catch the qeeded material! Brilliant!
When you're done with the heat gun piece, do you have to wipe down the wood or anything to get any remaining thick-it/ammonium chloride solution off???
When it's all done and cooled off you should wash it with regular dish detergent and then dry it well :)
@@jessibpower im in New Zealand and trying to find the Ammonium do you know if there is different stuff? only place i can find it is at a horse place? also is it food safe or a good wash afterwards gets all reside off? Cant wait to try this
@@bogeyi you can find everything that he is using on Amazon. Cheap prices at that
I absolutely love this tutorial. Did you happen to use any kind of cutting board food grade oil over the design?
I didn’t, but I’m sure you could once it’s all said and done 😊👍
Danish oil is great for wood and food safe too. I haven’t tried it yet though so not sure if it would work best before or after?
I absolutely love this project! Thank you so much for showing us how to do this! I can't wait to try it! I do have one question. How long did it take for the solution to dry for you to be able to remove the vinyl from the board and begin to use your heart gun to finish it?
Not too long! I can’t remember exactly, but I don’t think it was over 30 minutes
On his other video he said 30 minutes then he removed the vinyl!
I’ve had my Cricut for 6 years and I have learned so many tricks from just this video!! Thanks you!!!
Love the video and can't wait to try making some projects like this for my family for Christmas and Birthdays thanks again you really make it easy to understand what to do and how to use the cricut machine
This is amazing! Can’t wait to start making Christmas gifts!
Question: how do you seal the boards for use after you’ve finished burning the wood and washing the board?
Polyurethane is food safe.
So paint a coat of PU on top?
@@laurencarroll8754 Yes. I like to use the spray. I do three coats.
@@KKayfhill how long does it take to fully dry ?
I use mineral oil for cutting boards that will actually be used for food prep and not just display.
Amazing videos! I have a question: How long does it usually take this mixture to dry on your piece? My wife is in the middle of this project and we don't know how to tell if it's 'dry'.
Nice Technic.
Worth Learning.
Thank you
how long did wait for it to dry?
It takes 30 minutes to dry. I realize this is a delayed response, however if you haven’t started your project yet…. I thought it would be helpful to know!
I’ve tried this with Corn Starch and it works out really well for me.
Thank you!I was thinking about using corn starch.. would you mind sharing your measurements?
Yes pls share measurements on it all!! Thxx
Ratio?
Did you use the same measurements as the thick it?
It didn’t work for me..it won’t thicken without heating..I tried it as a liquid and it just left a white residue..So plz share or show how..Ty
I used cornstarch and ammoniumchloride...I used too much cornstarch but still worked perfectly..real clean design :-) no bleeding
I just love all of your videos!! Your voice is so calming and pleasant!!
i so loved this tutorial please keep the wood craft lessons coming. however i do have one question as to why make so much solution when you only need a thin layer? im waiting on my cloride to come in the mail. I can't wait to try this technique
You can save the solution to use over and over again. Just put it in a sealable container. 😊
@@mrcraftypants how long does it last in the container? Will it have the same consistancy or do i need to add something once im ready to re use it? Thank you
@@mrcraftypants how long will it last or be good for?
There is also a version of ammonium chloride that is meant for treating urinary issues in farm animals... you can pick it up super cheap at feed stores and it does the same thing.
Lola Holt
Thank you for that tip!!
I couldn’t find it anywhere, or the clerks had no clue🤪. Do you have a brand name?
Do you know what it’s called? The ammonium chloride is sold out on Amazon
The brand i get is AniMed... "Ammonium Chloride for Sheep and Goats"
Ammonium chloride is also used for fish. The pet store has it.
I wish I would have known about this hack when I was using an actual wood burning tool to make cutting boards to sell. It would have saved SOOOO much time!
Your ideas are always so good! Thank you!
I’m a newbie and thank you so much! ❤your video! Wow ✌️
I haven’t even bought a cricut yet but loved this tutorial! Fantastic idea for personalised gifts. Thank you 😊
You only used a small portion of the mixture. How long would it keep in a sealed container? For another project. A few days or a week?
I’ve kept it for months. Just give it a good stir and if it’s dried out any just add a pinch of water. 😊
@@mrcraftypants a pinch of water? LOL! Love it
Do you store at room temp? And thank you so much for your fabulous tips and projects!
Michael, can you Please teach us how to design and create an SVG? Please! I have tried to watch other youtubers on this and thought, I need Michael!
I’m working on a course for illustrator/Inkscape, but in the mean time, have you seen my PNG to SVG video? That may help a little 😊
@@mrcraftypants I will check it out. I haven't seen it yet. Will there be a cost for the course? Not that you aren't worth it, but I don't have the funds for such. Merry Christmas! 🌲
I love inkscape. A tutorial on how to navigate that program would be great. I know the basics but I believe there's so much more to learn.
Great video and it answered a lot of questions I had. Now that you have figured out how to do food grade wood, can you tell me how to make a dinnerware set that is completely useable, microwaveable, and dishwasher safe. Thanks again!
I'm a noob here. Just ordered a Cricut. This video was so cool! Thank you for making it!
WHAT DO YOU DO WITH THE LEFT OVER AMMONIUM CHLORIDE WATER THICK IT MIXTURE
I was wondering the same thing, can it be saved for another project?
Thank you for the tutorial, I'm pretty convinced to get my own circuit lol
Thank you for all you do and share with the world :).
Questions:
-can this emulsion/heat gun technique be used on cork trivets?
-can this technique be used with reusable stencils? Or will it ruin the stencil?
A friend just sent this to me & I am now obsessed with you. I've always done woodburn the old fashioned way, since I was just a little girl. I'm not so young anymore. I have a Cricut I've had for 4 years that I've never used, just not having taken the time to learn. Now I have you & I'm SUPER excited! Thanks in advance for what you're gonna teach this ol' girl!
That font hack is good, I never thought to do that. Love your tutorials