Honda GCV160 Teardown and Rebuild Small Engine Repair
Вставка
- Опубліковано 16 чер 2022
- In my last video we found that the crank was bent on this Honda GCV 160 small engine. This is a full length video on tearing down the engine, replacing the crank and re assembling the engine.
Thank you for watching. If you have any questions please comment below.
#smallenginerepair
TikTok: / smallengine
Join our Discord server: / discord
Facebook: / coloradospringssmallen...
Instagram: www.instagram.coloradosprings...
Small engine repair in Colorado Springs, CO that works on lawn mowers, tillers, generators, snow blowers, chainsaws, weed eaters, leaf blowers, augers, go-karts, and mini bikes. We provide tune-up, blade sharpening, oil changes, spark plug replacement, air filter cleaning, and replacement, carburetor cleaning, and general maintenance.
That bbq skewer trick saved me from losing it! Many thanks.
Im retired diesel mechanic and I enjoy rebuilding them
Great job Robby . Same engine I have on my Troy built mower . I don't know how I missed this video of yours .
Thanks for the video. Very helpful. BTW, the torque spec on the connecting rod bolts is 9 ft lbs.
Had a question but found the answer. Didn't know the crank was bent. Good video. I'll use it for mine which needs a complete overhaul.
Great video and 👍💪Detailed break down , thanks, now I'm off to tackle mine.
Thanks for the great video man. I just got done rebuilding my motor and this was a big help!
helpful video! great job.
and now gouging the crap out of the aluminum case with a razor knife to clean off gasket. good thing you use a premium sealant!
Great video. Wish the sound had been better. At this point I have nothing to lose in trying this. Cheaper than a new mower! Thanks
I got 8/9 of these engines but have no idea what is wrong with them and no time in summer to find out, will work on them during winter when it’s slow
My grandpa ran his without oil and I got stuck with trying to fix it. Thank you for this video! I was really struggling with getting the head/cylinder to separate.
Thank you
I’ve been using the Right Stuff silicone and it’s great, the Honda bond is great also
haha i loled at the missing socket.
According to the shop manual, those connecting rod bolts and the crank case cover bolts should be torqued to 12Nm (9ft--lbs)
Everyone has to start somewhere. I started learning the trade in a small engine mechanic school back in 1973 and ended up became a commercial small engine mechanic overtime, and ended my career in 2022…
This would be a great time to inspect the camshaft belt for wear or cracks and replace it if its needs to be replaced?
I took the spark plug out and I found a hole completely burnt through the threads of the cylinder. Should I bother going any further?
Great video. It was a bit too quiet. Do you know the best place to buy Honda parts? Thanks!