E6000 With New Precision Tips- Update Embellishment Station using Dollar Tree Wedding Favor Pails
Вставка
- Опубліковано 7 вер 2024
- The STRONGEST glue - REVIEW & Demonstration. Yea! Finally control how much glue comes out with the precision tips. Product links below. Please support my channel and use my affiliate links when possible. Thanks for watching. Blessings...
E-6000 With Precision Tips- • DIY Magnetic Cards 4 W...
Embellishment Storage solution with Dollar Tree Favor Pails
PRAISE GOD I NEEDED TO SEE THIS. I HAVE THIS GLUE AND DIDN'T KNOW HOW TO PUT IT TOGETHER! THANK YOU SO MUCH!!!!! GOD BLESS!!!
Hi, you can put a little bit of petroleum jelly or Vaseline (generic) to keep the cap that you close it with from sticking. Put a little bit of it around the inside of the cap and around the groove that the cap goes on. You can do it sshdo for the big tube also. You can do it with a lot of tubes with their caps do they don't stick or be hard to turn the cap open. God Bless you and your family. Hugs.
Great idea! Thanks. Blessings...
Thank you for sharing this tip. God Bless! 😇🙏🏾
This is the exact video I needed to see, I was trying to figure out what I did wrong sealing my E6000 glue since it glued itself shut after 1 use and how to seal it. This video solved things for me
Great video!! Now we just need this company to put the NO ODOR and the PRECISION TIPS into one package!! This stuff is amazing but WOW does it smell!!!
Thank you for this video! I think yours is the only video that shows how these precision tips are supposed to work. You're right that the directions on the package are insufficient and I've had the same problems with not being able to use much of the tube before it becomes unusable.🙏
Thank you so much! I had absolutely No Idea how to use the tips and it didn't come with instructions!!!
Hi! I really appreciated this video because I bought exactly what you have, and I had no idea what those tips were for or how they worked. I wasn't even certain how to puncture/open the white cap! So I learned a lot from the video! I worked on a craft project after learning, and I have a couple of ideas of my own that might prove helpful to some. First ~ my tube of glue did not 'erupt' like a volcano; it was reluctant to come out at all. So.... I used one of those thinks that looks like a key that you use to roll up a tube of toothpaste (for example) and I did need to roll it periodically while crafting. But THEN... it started dripping out and it was messy! So I rolled the 'key' in reverse which sucked the glue back into the tube, and I had a lot less dripping! Good! Now all I needed to do was clean everything when I was finished with the project. Your ideas for that process were good, but I went a step further. I googled how to remove E6000. COOL! The same thing you do with super glue, , crazy glue, etc. Acetone. Found right beside me with my nail polishing tools. Of course it was easy to clean off the outsides of everything, but I wanted to clean out the glue still inside the tip I used. Handy dandy pipette, a craft item, squirted the nail polish remover right down into the tip, from the top. Wiggled a thick needle around inside and after doing that twice, the tip was empty and clean. Thanks for getting me started using E6000! Happy crafting!
Suzy Solvesky thanks great tips
Walmart carries the E6000w/tips at Walmart. To clean the tips, have a sewing needle just thick enough to fit through the precision nozzle. Thread it with a double piece of yarn or thick string or floss. Run it through a few times to get excess glue out. Then do it again with the thread dipped in alcohol. I've only used one tip since I bought the tube months ago.
KJ Starr awesome idea thanks
Great video ! You talked at the perfect speed ! You showed everything in detail. You are wonderful ! I 🙂
Thank you for giving us the tips for using the E6000 glue.
Bought E6000 this afternoon. Zero clue on how to use the tips and what to do when my project is done.
THANK YOU for uploading the instructions on UA-cam!!! And thank you for advice on how to clean everything!
Thank you so much for this tutorial because for 30 LONG minutes I was trying to figure this thang out 😂🤦🏾♀️ so I can complete my DIY chandelier....thanks hun😊
Thank you! Your a life saver!!!
I seriously appreciate this. It seems like common sense but I was struggling trying to figure out how to use this for the first time.
Thank you soooooo much for this vid! Bad E6000 for not giving us instructions! Bless you for figuring it out & sharing 💜💜💜💜
I swear dealing with glue is a pain. I have more glue problems then the project I'm working on. I just used this exact glue and like you said it erupts. Then glue came out the side of the tube. Then the black top got full of glue because I was putting it on the tip wile I was working sonic wouldn't ooze but it didn't help much. At least this size tube doesn't cost as much because I had to throw out my large tube.
You seriously have no idea I have been messing with this tube for way too long lol this was a huge help thank you so much
I love the precision tips. I stopped using e6000 because it was too messy!! Then I found that and it's awesome. They are all the same size they give you so many cause they get clogged.
This is exactly what I needed to know. Thank you so much for doing this video!😂
Thank you. I've never used E6000 and am about to use it and this is very helpful. I got the kind that you showed here with the extra tips and wasn't sure how to use things so this is just what I needed to know.
Thank you, great video as I was totally clueless regarding the final closing, I didn't even recognize there was a black cap..thanks again!
Using a needle to clean is an amazing and smart IDEA thank you
Thanks for showing us how to use the tips. The E6000 company should pay you! :-)
You are a lifesaver! I couldn't for the life of me figure out how to get the tip on!!
Thank you so much for this video...did not know how to put the cap on after use.
THANK YOU!!! I had no idea how to do that whole cap thing!
You did a good job with this video especially for people like me who didn't know how to use the tips. Thank you 💞
Thank you! I am so happy that I found this video. I did not know how to use the tips!
The last e6000 I bought had the tips, and like you, did, it was fairly easy to figure out. This was done with clarity and great visuals. Thanks so much!
Thank you for providing this video! I was at a loss at how to apply the tips.
Thanks so much. Very informative. I honestly had no clue how to use the precision tips
Thank you.... I was really flustered trying to figure it all out.
Omg lol. I had no idea how to put the tip on. Thanks so much
I heard a good tip for these glue tips. Someone on UA-cam (can't find the video) used Vaseline in the tip first or coconut oil. The glue won't harden and is easier to rinse from the tip.
Thank you for the help!! I really appreciate it!! 😊
Thank you! This was so helpful. I just used E6000 for the first time and what a mess! I punctured the tube from excessive squeezing. I did wear a mask. But, oh my what a mess!I appreciate the time you took to make this video.
One thing I discovered any of my small bits under 1.2mm from my Dremel, hand drill twist, and some in my nail drill tool. All work to clear hardened glue out of the tips. They'll wear down eventually but you can get a lot of uses out of the 3 tips mine came with. I discovered this with the bits because i lost 2 of 3tips 😁 😆
I need to see a video about this please.
You can clean the Precision tip with Goo Gone B4 the glue dries and it won't clog and wipe off the top of the tube with Goo Gone also. Appreciated your video!
Thank-you I came to the comments to ask about cleaning the tips. I have goo gone too. 🥳
I was going to try a lil water down acetone solution to drop the tips into a lil container with a lid.
Nice to know it comes that way.
Wish we could get those tips here in the U.K.! We only get all plastic ones! Us pertroleum jelly based lip balm on the outer of the nozzle and inside the lid and round the neck and that should stop the lid from sticking, it’s meant to work, I’m waiting for my new glue to arrive to test it! The other tip I got was when you remove the metal tips use a candle lighter and forceps to hold the plastic bit and then light the metal end and that will burn the glue out and you tip is useable! Again waiting for my glue to arrive to test this out as I’m fed up of binning full tubes that have become unusable,. Has anyone successfully decanted e6000 into a smaller bottle to use? It was suggested I try that as well, we will see. Thanks for the vid 😊
Thank you for this video. I bought the E 6000 glue with the tips and like you said, there were no instructions about how to use the tips. Thanks for all your tips! ;) haha
Thanks Felicia!
I also just soaked my tips in ACETONE it helped somewhat.
I bought this also and love it plus I cleaned my tip also
Thank you some much for advice. I just purchase E6000 with the tips because Loctite as great as for some jewelry projects. A friend me E600 would be great for other but I was at loss reading the instructions on the tips. Very helpful.
Thank you! I came here looking for how to put on the precision tips !!
so helpful thank you, I adore this glue but at times it gets everywhere. Well done.
Thanks for info, it was just what I needed to kmow😊
Excellent advice
So glad you figured it out i ended up wasted mind before mastering it
Hi ! I just bought and used e6000 glue and was having a hard time figuring out these tips ! I expected a large black covering cap to cover the special tip , but no , there was none. So all I could think to do as try to use the little black cap. I set it on the table and the glue began to ooze just as you said, pushing the black cap off. I thought “do they expect me to remove this tip every time i use this ?” And sure enough I googled how to use these tips and your wonderful wonderful video showed up! I’m glad it wasn’t just me figuring this out and I’m so glad you made this helpful video! Now I need to find a safe place for these tips and hope o remember where I put them 😀. Thank you so much for this video ! And God bless you and your endeavors.
Awesome video! Thanks.
Use a stainless steel pin and it won't rust and turn your glue brown/black.
Thanks for the video! I would add that the glue vapor is hazardous and harmful. Be sure there is plenty of ventilation when using the glue, unless you're doing a quick job. Use gloves and do not get the glue on your skin to avoid irritation. Wash your hands thoroughly after use. That is all.
Super helpful. Thank you
😊 thank you
Thank you
Thank you!
Awesome Thank you !!!! 🤟🏽🩷
Thank you for the how to
tips....bless you!
Bravo 🎉 🏆
Thanks 🙏🏾
😇
Great tips, Tfs
There is a way to squeeze the tube and make the glue go back in. After it dries I use backing soda and airwick to tone down the odor.
Thank you for sharing the how to..
Aloha, Bless YOU! I am loving this video!
Incredible guide
Life Saver! Thank you!
I didnt get the little white part with my precision tips :( so I can't use them
What I discovered to keep the glue from drying out, is to place a small piece of aluminum foil over the tip after using. 🙂
Super video!
Yes don’t throw it out I store mine with a hat pin in it and it stays clear.
TRY Putting them in a cup of GooGone. Then clean them with a needle. Rinse with HOT WATER.
You are right, there aren’t any instructions on the package about how to use the tips.
Can this be put into a different container for storing? I hate how much gets wasted when it just pours out and cleanup sucks.
How do you clean the threads on the glue ? TY for showing this!!!! Also BTW squeeze from the bottom of the glue and use a toothpaste key. :-)
How do I clean the white cap? I guess i left open for too long and now you can feed any glue through the white cap so I can't use the pointy tips, had to make bead jewelry using the glue without pointy tip and now I got glue all over my jewelry pieces and can't get rid of it...
WAIT, you got TWO white caps with your E6000??? I only got one, it has a hole in it, AND none of the precision tips (or the black plastic thing will fit it. I've been sticking a toothpick in the hoke when I'm finished gluing so that the glue in the tube will be sealed (sort of). After watching this, I don't think I got all the pieces I need in my package. 🥺
My glue didn’t come with a black tip to help close it when I’m done. What do you suggest I do to keep it closed? I’ve just been putting a needle in the top and putting it in a ziplock bag.
I got this but just after a couple of uses they glue got stuck in the tip and dried and I couldn't get the glue out
So what do i do if i have the black Lense thing on my e600
😊
thank you for the tipis about the tips. I ust went to the e-6000.com site and they said that uncured glue can be cleaned with acetone or citrus based solvents. I have acetone for my nails. Many nail polishes also have some acetone, so those would probably work?
Nail polish REMOVER is acetone, not nail polish.
@@herbfellows6435 if you look at nail polish ingredients, many have a small amount of acetone in it to keep it fluid. once the small amount of acetone evaporates, the nail polish can harden. nail polish remover may or may not have acetone in it, depending upon the nail polish brand.
I bought the E6000 with the tips but it did not have the black tip to cap after using it. Where can I find the black cap!
It should be in the package with the tips.
My glue still doesn’t flow through the tips
I want to try this and use a vinyl name. Do I have to use the scatter method since I'm using the vinyl or can I use the straight line method. ( which I think may be easier. )
Are all the extra tips the same
Yes. Blessings...
I was curious about this glue myself as I just bought a "jewelry and bead" variety that has those tips and it has very minimal instructions on the back in teeny tiny print... I liked seeing how you use it. Also, I noted in tiny print on my package (and on the website for the glue after I googled to find this video and other info) that it says you can "Clean uncured adhesive with acetone or citrus-based solvents. Cured material may be removed by cutting or scraping." so maybe that could also help cleaning the tips in between uses? I'll have to get some acetone or citrus-based solvents before I try using it to see how it goes. :)
eclecticproducts.com/e6000-jewelry-bead.html
U r right about instructions…. U need experience cuz the company is to cheap to include instructions and tips……pathetic
My tips can’t go into my tube
I can't figure out how to put the tips on.... And now after watching I feel dumb
🙏💕“Dear Heavenly Father, I know that I have broken your laws and my sins have separated me from you. I am truly sorry, and now I want to turn away from my past sinful life toward you. Please forgive me, and help me avoid sinning again. I believe that your son, Jesus Christ died for my sins, was resurrected from the dead, is alive, and hears my prayer. I invite Jesus to become the Lord of my life, to rule and reign in my heart from this day forward. Please send your Holy Spirit to help me obey You, and to do Your will for the rest of my life. In Jesus' name I pray, Amen
Moses invests.
💕❤ Gospel of salvation: 💜💕💜💖💞💜💕For what I received I passed on to you as of [first importance]: that Christ died for our sins according to the Scriptures, that he was buried, that he was raised on the third day according to the Scriptures, and that he appeared to Peter, and then to the Twelve. After that, he appeared to more than five hundred of the brothers and sisters at the same time,
Thank you.