As a tip, your stamp would stamp much better if you were to put a thin layer of foam (craft foam would work) between the wood and your rubber stamp. Alternatively, you can place some foam under the paper or a stack of paper to give it some padding when stamping with the one you already mounted. Rubber stamps on wood blocks need a little bit of give/padding to get good impressions.
Patrice not sure why you could not near me saying to " Mirror your Image ". But this is the video that has convinced me to buy the X-Tool...thanks for helping me spend my money. Stamping tip: apply the ink to the stamp, this helps keep the ink from getting on the edges or cut the excess way. Now I'm off the buy a X-tool. Thanks again for all you do!
Hey Angela!!! SMH! I wasn't listening. 😂 Thanks for the tips. I think that you will love the xTool. If you have FB, I would suggest joining this FB group: facebook.com/groups/378358767386789
Great instructional video. Thank you for showing the mistakes. I find that very helpful and informative as I am new to laser tools. Looking forward to watching more of your videos.
Thank you for the video. I was actually using the magnets under the honeycomb as feet, since I thought it needed the space for airflow. Now I can actually index my wood stock without fail. The more videos I watch, the better. Subbed.
You made my day , I didn’t even know I could make these which will be a game changer but I’m so glad you didn’t edit out your mistake with the mirroring !🙂
Lol, as soon as I saw the design being done..oh well, we all goof up sometimes! Another stamping tip for you, a piece of craft foam under your paper might make it stamp ok...but it does need to be a deeper engrave. I have made Polymer stamps at home for years using a UV polymer and a lamp but I'd be tempted to laser cut them if I wanted to make a load of them.
So my thought on why it didn't stamp in the middle, you need to make sure that you apply glue evenly over the entire stamp. Looks good, made me giggle that you didn't reverse the image. I was yelling at the video though. hehehe
This was a helpful video. Thanks for making it. I can't find any mention of the LED wattage. I've got a 5w D1. Do you think that will work, but with more passes? I'd buy the material from xtool with your affiliate link, but can't find the link or code. Thanks again.
omg I thought you meant 'mirror' when you reverse the +/- on the engraving, then I had to watch the whole video to see the omg at 12:45 haaaaa done the same thing 100x
I caught this video not long after it was posted. I haven't received a confirmation yet so I am not 100% sure that I am the Brian that won. Hopefully so. When she first said Brian... I was like what did she say? Then she said my last name and then I thought uhhhh could that really be me. Then my name came up on the screen. But it is still a possibility it is another Brian.
@@captainkiddoregon I thought Patrice @Craftable Things said there were only 12 eligible winners. I can’t imagine there being two people named Brian Kidd in a group of 12 people. Good luck!
Sorry for the late reply. I want thank Patrice and xTool again. Everything has been sorted out and I received my refund for the whole order. This is probably the best drawing I ever won. Laze on!
Thank you for making this video. Love the stamp you made. Any chance you could share the settings guide? My xtool sample pack didn't have one included and they don't have it on the website. When I call the help line, I get voice mail...grrr.
I have to subscribe! You are having fun and using your xtool. I am struggling and kind of dislike it at this point. I spent alot of money on this tool and I have been disappointed. Hopefully I can learn from you.
As a tip, your stamp would stamp much better if you were to put a thin layer of foam (craft foam would work) between the wood and your rubber stamp. Alternatively, you can place some foam under the paper or a stack of paper to give it some padding when stamping with the one you already mounted. Rubber stamps on wood blocks need a little bit of give/padding to get good impressions.
Great tip thanks!
Patrice not sure why you could not near me saying to " Mirror your Image ". But this is the video that has convinced me to buy the X-Tool...thanks for helping me spend my money. Stamping tip: apply the ink to the stamp, this helps keep the ink from getting on the edges or cut the excess way. Now I'm off the buy a X-tool. Thanks again for all you do!
Hey Angela!!! SMH! I wasn't listening. 😂 Thanks for the tips. I think that you will love the xTool. If you have FB, I would suggest joining this FB group: facebook.com/groups/378358767386789
@@CraftableThingsThanks and I just request to join the FB group.
Great instructional video. Thank you for showing the mistakes. I find that very helpful and informative as I am new to laser tools. Looking forward to watching more of your videos.
Thank you for the video. I was actually using the magnets under the honeycomb as feet, since I thought it needed the space for airflow. Now I can actually index my wood stock without fail.
The more videos I watch, the better.
Subbed.
How did you invert the image on laserbox? I've been trying and can't figure it out. Help please, lol
Thank you for the video! Is the Xtool D1 you showed in this video a 10W or 20W? I'm trying to decided which one to get for making my stamps.
You made my day , I didn’t even know I could make these which will be a game changer but I’m so glad you didn’t edit out your mistake with the mirroring !🙂
Thanks for watching! 💕
I LOVE LOVE LOVE that you did not remember to flip the image! bless you, friend! i subscribed!
Could you explain how you inverted the image in x-tool creative pace?
Draw a shape (in this case, a rectangle) around it, select both the shape and the image, Combine -> Subtract.
Love the fact that you goofed up and laughed about it. Cute.
Laughter makes everything better, right? 💕 thanks for watching!
Do you have the link for the stamp kit you bought? I don’t see it listed in the description! Been wanting to try to make my own stamps!
Lol, as soon as I saw the design being done..oh well, we all goof up sometimes! Another stamping tip for you, a piece of craft foam under your paper might make it stamp ok...but it does need to be a deeper engrave. I have made Polymer stamps at home for years using a UV polymer and a lamp but I'd be tempted to laser cut them if I wanted to make a load of them.
So my thought on why it didn't stamp in the middle, you need to make sure that you apply glue evenly over the entire stamp. Looks good, made me giggle that you didn't reverse the image. I was yelling at the video though. hehehe
Thanks for the tip & Thanks for trying to tell me that I forgot to reverse it! 😂 I don't listen 💕
@@CraftableThings I don't listen lol ! Me either.
Ooo now that my laser came I will need to try this!
I use laserbox. How do you mirror the image?
This was a helpful video. Thanks for making it. I can't find any mention of the LED wattage. I've got a 5w D1. Do you think that will work, but with more passes? I'd buy the material from xtool with your affiliate link, but can't find the link or code. Thanks again.
Patrice I was yelling at the video saying mirror it. 🤣🤣🤣
Thanks for trying to tell me. You know I'm a hot mess.
@@CraftableThings your not a hot mess you got a lot on you plate and I still love you 🥰
If you learn from
Others mistakes their mistakes where part of the educational process
Not me wanting to make a stamp and absolutely NOT needing it lol. Congrats Brian!
omg I thought you meant 'mirror' when you reverse the +/- on the engraving, then I had to watch the whole video to see the omg at 12:45 haaaaa done the same thing 100x
Hehehe not mirrored. Exactly the thing I would do. End product looks great. I think your ink pad is a tad dry.
Hey Barb 💕💕! 😂😂😂 Just a hot mess! I just opened that ink pad. It's worst than my old pad.
i love your channel! i just came across and it has so many cool things to learn
Is the xtool on the same level as the glow forge?
they are different types of lasers. The Glowforge is more powerful and the xTool has the rotary attachment, which can't be done with the GF.
Congratulations Brian Kidd! 🎉
@Patrice, so you think two passes was equate for the stamp or will you do three?
Hey Rosanne! I’ll do three for the next one…my mind is set on three.
I caught this video not long after it was posted. I haven't received a confirmation yet so I am not 100% sure that I am the Brian that won. Hopefully so. When she first said Brian... I was like what did she say? Then she said my last name and then I thought uhhhh could that really be me. Then my name came up on the screen. But it is still a possibility it is another Brian.
@@captainkiddoregon I thought Patrice @Craftable Things said there were only 12 eligible winners. I can’t imagine there being two people named Brian Kidd in a group of 12 people. Good luck!
Sorry for the late reply. I want thank Patrice and xTool again. Everything has been sorted out and I received my refund for the whole order. This is probably the best drawing I ever won. Laze on!
How to do the technique of inverting everything?
which design software do you use?
Canva for design, and laserbox basic for make
Thank you for making this video. Love the stamp you made. Any chance you could share the settings guide? My xtool sample pack didn't have one included and they don't have it on the website. When I call the help line, I get voice mail...grrr.
It still amazing
thanks, boo!!! 💕💕💕
The most important thing in this video is how you invert the image, and its now shown....
How long will the discount be available?
Also what is the thickness of that rubber?
Omg the whole time I'm like MIRROR IT!!! 😂
😂
I so need to get some stamp stuff!! The XTool is so awesome!!
I know that you'll do waaaaay better than me 😂😂😂💕💕
Can we import this in india
Congratulations Ryan
Congratulations Brian
I use double sided tape for my stamps
thanks for the tip, Chrissy1
@@CraftableThings anytime.
I have to subscribe! You are having fun and using your xtool. I am struggling and kind of dislike it at this point. I spent alot of money on this tool and I have been disappointed. Hopefully I can learn from you.
You are truly talented
Still came out good even though you forgot to mirror 😅
Yessss
The discount code is not working
Congratulations Brian 🎉
I’m stuck in the room with Covid I can’t play with my M1 🥺 just waiting of craft and talk
💕💕💕
Looks easy enough to use but I want to make stamps as a business and that wait time is kind of long, is there another model than can do it faster?
Did you ever find a faster way to make rubber stamps?
@@marilynwong9784 yeah I bought an Aeon Mira 7 co2
Everything, is off, disorganized et not prepared 😅, but I enjoyed this video though, nice energy 👍🏻👍🏾
You got me wanted to spend money ma’am
Who u know
💕💕
STOP using the laser without forced fan exhaust or YOU WILL PAY WITH YOUR LUNGS MASK or NOT.
Hello craftable things an group
Hey Ms. NeNe!!!
Hey Queen
Hey Queen 💕💕💕
👀
💕💕💕💕
Press down harder.
Hi Patrice can you make me a CEO stamp
I. WILL. NOT.
Why not just engrave the wood with your laser with the file
💕
Thanks for watching! JV JV
TFS👍🏽
Your y axis doesn’t sound good at all sounds like it’s binding
12:47 😂 i was waiting for it 🫶