"Removing seal cups this way.. I doubt it but it works great You'll need bolt 7/16'' and about 5''-7'' long. It will finish extracting in 15 seconds. Original cups are made from steel and rubber. Thank you for the video!
My kit came with 2 o rings, does the cup seal side get a o ring also? Just realized the other o ring goes on the end of the pressure hose at the power steering pump
I did this upgrade line on mine. You didn't include part #. It is. Gates W0133-1779307. Was having much trouble with aftermarket original design. Kept leaking on high pressure. So far, so good. Don't know yet if it will last.
I can't even tell where your at with your camera, in the future, that would be helpful for newbies.
"Removing seal cups this way.. I doubt it but it works great You'll need bolt 7/16'' and about 5''-7'' long. It will finish extracting in 15 seconds. Original cups are made from steel and rubber. Thank you for the video!
My kit came with 2 o rings, does the cup seal side get a o ring also? Just realized the other o ring goes on the end of the pressure hose at the power steering pump
Wasn't really sure, I didn't get any instructions with the hoses. Then I got 2 o rings and only 1 cup seal. Thanks for the video
@@garysample1980 did you get it?
can you get two new lines without
cup seals?
www.ebay.com/itm/154341914640?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=g5PBnjvGQry&sssrc=2349624&ssuid=nl7Gtp2NSRW&var=&widget_ver=artemis&media=COPY
0:34 1:59 2:17 3:36
I did this upgrade line on mine. You didn't include part #.
It is. Gates W0133-1779307.
Was having much trouble with aftermarket original design. Kept leaking on high pressure. So far, so good. Don't know yet if it will last.
What is the part number
www.ebay.com/itm/154341914640?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=g5PBnjvGQry&sssrc=2349624&ssuid=nl7Gtp2NSRW&var=&widget_ver=artemis&media=COPY
dang cup seals are trash
You are 100 percent right.