So question. If I use the Joybring you are showing with reverse camera, etc anc 3wXv4V5 adaper harness I will maintain my steering wheel volume controls and the chime system.? I would like a unit with Navigation, also. When you check on the Boss system they want to know your RPO code so they know which harness to use. Any Idea on which RPO code they are looking for. the label in my glove box does not identify which code is for the bose system I already have. all this gets very confusing. thanks for you video and help. Reply I posted 2 comments, not sure why you didn't see them. Sorry about seeming to be complaining, I figured the above system won't give me Navagation without using a cell phone, So I need to look for something else. Sorry to have been a bother. Good job on your videos. My car is a 04 envoy, but pretty much the same. Thanks again, Randy
Thanks for the video. :D The step by step process of not only removing the old radio but installing the new one was terrific. I've been wanting to get my radio replaced in my '07 Trailblazer for the longest time now, but I've never seen the process done before now. :'D Now that I've seen the video, I'm talking myself into doing it myself. hahahaha
Direct to the point, very informative. Thank you. I truly wish you could make a video with one that has the premium system with the rear seat controls and how to be able to retain those or do a cool mod with that part as well.
Hey there, I'm currently (attempting to) install a new radio in my 04 envoy XL w/ bose and didn't want to fork out the 100 bucks for a harness, do you possibly know if I can leave the BCM data bus cable disconnected? Thanks in advance.
Good video and well explained. Unfortunately i am building (soldering and heatshrinking) my harness and the whole reason i watched this video was for the illumination wire. I was really hoping for something to the effect of.. "If you have a none bose gps factory unit the pin you need is this one top or bottom row 4th from the left Ex. check for continuity from the pin to the wire to ensure you have the correct one and solder it up." not a huge deal i will figure it out when i put it in. Also i will let you know i didn't connect my power antenna wire to my remote so i will let you know how that plays out. might have to solder that connection anyways. As i don't have a power antenna it seems redundant. Haven't checked the wiring diagram to see what other vehicle systems that powers though..
I wired in a head unit on my 2008 trailblazer, followed all of the instructions and double checked my work, however I was unable to find which wire was my ignition signal. I wired red to red and yellow to yellow as my harness instructed but my radio doesn’t cut off with ignition, i have to manually power it off at the unit itself. Am I missing something? I used the same metra harness shown in the video, I even tested all the leads at the factory connector for power when cycling the ignition. Just curious which wire in the connector was supposed to give me ignition?
Awesome Video. Quick question....when I plug your part list into amazon it tells me that radio won't fit a 2005 gmc envoy. I'm assuming that is why I also have buy the mounting bracket?
Should I upgrade my 07 TB Bose front door subs with name brand shallow mounts and juicy amp, or would I be better off going with the traditional sub/enclosure in the back?
Ps really just trying to get something with backup camera, navagaion, and maybe android bluetooth. Don't need amp or sub woofers etc. Mainly a backup camera that is on the radion, not some extra unit. So thanks for your help. hope things are well in Provo. Randy
i have a question the black wire off my factory amp i think its a rf wire. how do i hook it up to my after market radio. cause my factory amp isnt working
False. Odometer value is stored in the EPROM on the cluster, it's the same with all GM trucks from this era. The odometer value might be written elsewhere, but if you put a junkyard cluster in a car it'll carry the donor vehicle's odometer value with it. jeffescortlx here on youtube has a number of videos where he repairs clusters, including pulling the EPROM values from a broken cluster and writing them to a donor cluster.
what is all i need to buy to replace completely stock stereo. Havent messed with anything i have a stereo to buy but do i need the wiring harness i have an 03 trailblazer
Hey so i have an 05 trailblazer wit bose system and remote start so only the front speakers work and nothin in the back i changed the head unit and still the same no sound i messed wit fade option and still nothin any info will help
What type of wire harness and chime retention unit would I need for a 2008 Chevy Trailblazer LT with the Bose stereo? I've had no luck even after spending a ton of money on several that were supposed to work with the Bose factory stereo with the Bose Digital Amp. I'm trying to swap out the factory stereo because mine is none functional ive tested another Bose stereo and there's power going to it but a touch screen with modern features would be great. Thanks for any help you may be able to provide.
Inordered the crux harnes plugged everything color coded and works when inturn key to acc on but no audio when i turn the car on... volume is low when i plug into bose but very loud when i plug into non-bose??? Help!
Just bought 05 trailblazer xlt. Would you know why the radio has nothing but all static. A radio station kind of bleeped in but signal won't stay. Tried to check antenna but it seems connected. Help, please.
I bought same wire harness (LC-GMRC-1). My head unit has an orange/white illumination wire. Do u know which orange wire i connect from the metra wire harness? I have a 2007 trailblazer LS.
dear, im having trouble after i installed an android screen on my trailblazer 2006.. an electric current buzz sound .. very load .. always on my front left speaker, and sometimes back right speaker .. the only thing i got to notice is that its starts when my bass sub kicks in after less than a minute .. sometimes its from the beginning .. sometimes it doesnt accure .. most of the time it does accure .. i need help .. the guy who applied that screwn to me told me i need a sound filter right between the cables and the new screen to plus and that will filter out all of this .. would that work .. is that correct ? thanks
Thanks for the reply. I have put in many aftermarket radios, but theses days with the chime system and onstar (which I don't use), trying to find a unit and all the extra things to install it can be a pain. So you say the Boss system would be good?
Will the LC-GMRC-01 HARNESS WORK IF I HAVE BOSE AND ONSTAR AND STEERING WHEEL CONTROLS? THE CONTROLS AND ONSTAR WILL JUST BE INACTIVE? OR DO I NEED THE HARNESS FOR THE BOSE AND ONSTAR AND STEERING TO MAKE THIS WORK SINCE MY CAR HAS THOSE FEATURES?
Lots of variables when wiring depending on the harness, radio, etc. If you want specific wiring help, send us a message on facebook / instagram and we can help.
Which one do I need to get for a 2002 envoy without bose , no steering wheel control, and it has onstar? Any help would be appreciated. Thank u in advance
Oh, not at all. Thsee no-name cheap Chinese radios are absolutely trash. I recommend a brand name unit for the best user experience, quality, and longevity.
I used the exact same products as you, but mine did not have the interface illumination tab on it, just curious if you remember what color it was or if you had to double up any wires
Sure, if none of the illumination wires pass through the harness resulting for the need to use the interface illumination wire, it doesn't hurt anything just to connect all of them together. Alternatively, you can use a multi meter or continuity tester to identify which wire you need and eliminate the ones you dont.
So question. If I use the Joybring you are showing with reverse camera, etc anc 3wXv4V5 adaper harness I will maintain my steering wheel volume controls and the chime system.? I would like a unit with Navigation, also. When you check on the Boss system they want to know your RPO code so they know which harness to use. Any Idea on which RPO code they are looking for. the label in my glove box does not identify which code is for the bose system I already have. all this gets very confusing. thanks for you video and help.
@@ProvoBeastAudio Okay starting over. Just about think it isn't worth messing with this radio change. My car is 04 gmc envoy xuv. It has factory GMC radio with Navigation. I need to know what radio would work for me with Nav, steering wheel controls, Onstar and my saftey chime system. Also want a backup camera, but can add that if the radio has the rear camera plug on it. Harnesses area night mare. PAC RP5-GM11 Wiring Interface has this one, but seems to be really expensive, but is the only one I can find that does it all. The new radio needs Nav and backup camera. Either Nav in the radio or the android play, but really don't like the cell phone idea, but can do it if that's all there is. If you read this please let me know if you have any ideas. Thanks, Randy
I don't see a link. I have OnStar on my rearview mirror. I'm trying to install a touchscreen in my same vehicle. But I don't got any buttons on my steering wheel. Idk what hardware harness I need to get.
Amazon's fit guide is trash! With the right install parts, it will work great. Also, that Boss radio is also budget friendly, and has a much better warranty.
HELP!!! I cant find the amp in my model!! I have one for parts and the amp is located under the passenger seat but in my main one there is no amp in that location or the trunk?? Is it possible my slt doesnt have one? *parts model is 2007 sle, daily is 07 slt both are envoys
This radio is Junk, but a 05 Jimmy will accommodate a traditional double din, yes. Send me a message on instagram / facebook and I can point you in the right direction
Does the Smart Harness do anything to activate the Red wire for power? I purchased a harness and wired to spec with my Dual radio and the Red wire out of the harness is not giving power when the ignition is on.
Yes. Your GM vehicle doesn’t have an analog accessory red wire as the “turn on” wire is data controlled, and so it has to be generated by the smart harness for the radio. Be sure to get the right harness for your vehicle.
@@ProvoBeastAudio I bought an envoy a while back where the PO had run a wire back to the body control module and pulled switched 12V power from one of the fuses there. It works, but definitely isn't ideal. If you have a Bose system you definitely need the adapter though.
I have a 2002 Bravada oldsmobile, even though it has Onstar system(Which is not activated and I do not require it) just as I would not mind not having the steering wheel controls, can I use the cheaper harness or do I require to use one that retains the steering wheel controls, also the speakers are not heard without the factory radio, with this harness will this be solved also?
You can use a cheaper harness that doesn't enable the features you want and it will still work, just won't be able to use the features because of course, you bought the harness that wouldn't let you use them.
I only think so. You could tell because the security light flashes on the dash showing it's active when you lock the vehicle, or at least shows that on my 02 TB LTZ
I did this EXACT install, I do not have SWC or Bose, but I do have Onstar. For some reason the radio is shutting off every time I open the door, WITH THE ENGINE ON. I plugged in my OE radio to make sure it wasn’t my door switch, it stayed on. Any ideas?
Hey guys. Had a car audio guy install this as per your amazon links: but the unit wont turn off when I turn ignition off. I have to manually turn off the unit so it turns off and I dont kill my battery. Any ideas?!
Do you have to have the smart harness because when I hook my stereo up in the car I have no power but when I hook the stereo up to the battery the stereo comes on
@@chrisbarber1020 Yes I do, but also depends on the radio you are installing and the parts used. If you send us a message on facebook, we can certainly help you out.
Also, if you are using an android based radio, in addition to wiring the steering wheel control connections, no-name brands also require you to manually program each button within the settings of the radio.
@@ProvoBeastAudio since mine didnt come with the accessory wire do yk whoch fuse i could use to make it accessory power on thw fusebox under rear drive side seat fuse box
@@Dhill.angelI Which means you are using the wrong harness adapter if your harness doesn't have an accessory wire. If you refuse to use the correct harness adapter, you will need to use a multimeter to determine which fuse to tap into. IF you go that route, please do it correctly using an add-a-circuit.
So I bought my harness, wired everything together, I have power, the radio works, but I have absolutely 0 sound. I’m not sure what’s up. If the wires for the speakers don’t have good connection? I’m not sure
@@haydenpeterson1385 Not familiar with your specific stereo...if there's an amp powering the speakers you may want to be sure the blue (remote) wire is hooked up correctly.
@@ProvoBeastAudio Thank you very much for answering, I found the "heat shrink tubes" in Auto Zone. However, he asked about me not being able to solder the cables (the red, yellow, etc.) How did you do it? Can I put black tape and mini heat-shrink tubes and apply the heat gun to adjust them?
In most cases, it won't be used. Depending on the factory features of your vehicle, along with the different trims available, that harness may or may not have been used with the factory radio. They also may have had factory features no needed by the aftermarket equipment.
Randy, i get hundreds of comments a day over multiple social media platforms along with direct IMs and running a full install shop. I can't get to messages right away. If you need help and I don't see you comment, you can always reach out to us on facebook or instagram for assistance.
i did the color for color but eont turn on, im also having the second factory harness not being used, why wont it turn on? do i need to tap a wire to something?
Hey Dude 05 Chevy Trailblazer Lt I would like to know where I can find that same radio system to replace the old radio with an aftermarket radio 📻 system in the SUV. Why do I ask I like it looks In the SUV. Could give me the model # I can find it on web site or here in the Houston TX area.
Parts used linked in the description of the video!
So question. If I use the Joybring you are showing with reverse camera, etc anc 3wXv4V5 adaper harness I will maintain my steering wheel volume controls and the chime system.? I would like a unit with Navigation, also. When you check on the Boss system they want to know your RPO code so they know which harness to use. Any Idea on which RPO code they are looking for. the label in my glove box does not identify which code is for the bose system I already have. all this gets very confusing. thanks for you video and help.
Reply
I posted 2 comments, not sure why you didn't see them. Sorry about seeming to be complaining, I figured the above system won't give me Navagation without using a cell phone, So I need to look for something else. Sorry to have been a bother. Good job on your videos. My car is a 04 envoy, but pretty much the same. Thanks again, Randy
Thanks for the video. :D The step by step process of not only removing the old radio but installing the new one was terrific.
I've been wanting to get my radio replaced in my '07 Trailblazer for the longest time now, but I've never seen the process done before now. :'D
Now that I've seen the video, I'm talking myself into doing it myself. hahahaha
you guys do great work. Really enjoy my blazer now that you put the Apple CarPlay in it.
Direct to the point, very informative. Thank you. I truly wish you could make a video with one that has the premium system with the rear seat controls and how to be able to retain those or do a cool mod with that part as well.
Fortunately for Envoy owners, the bezel (buh-ZELL) only covers the A/C and radio.
Hey there, I'm currently (attempting to) install a new radio in my 04 envoy XL w/ bose and didn't want to fork out the 100 bucks for a harness, do you possibly know if I can leave the BCM data bus cable disconnected? Thanks in advance.
I searched Pippi Longstocking hair style vids but got this instead.
😂💀
LMFAO 😂😆
Potato tomato lol
Just ordered everything through your links. Great video. I’ll be doing this soon.
Good video and well explained. Unfortunately i am building (soldering and heatshrinking) my harness and the whole reason i watched this video was for the illumination wire. I was really hoping for something to the effect of.. "If you have a none bose gps factory unit the pin you need is this one top or bottom row 4th from the left Ex. check for continuity from the pin to the wire to ensure you have the correct one and solder it up." not a huge deal i will figure it out when i put it in. Also i will let you know i didn't connect my power antenna wire to my remote so i will let you know how that plays out. might have to solder that connection anyways. As i don't have a power antenna it seems redundant. Haven't checked the wiring diagram to see what other vehicle systems that powers though..
Awesome video, great job! I got mine done, and it worked like a charm. Thank you!
Hi again can you explain what about the other harnes connector of the Bose radio the black one please?
Where is the on star and steering wheel video?
I wired in a head unit on my 2008 trailblazer, followed all of the instructions and double checked my work, however I was unable to find which wire was my ignition signal. I wired red to red and yellow to yellow as my harness instructed but my radio doesn’t cut off with ignition, i have to manually power it off at the unit itself. Am I missing something? I used the same metra harness shown in the video, I even tested all the leads at the factory connector for power when cycling the ignition. Just curious which wire in the connector was supposed to give me ignition?
Hi thanks for the vídeo one question what did you do with the other connector of the Bose radio?
Awesome Video. Quick question....when I plug your part list into amazon it tells me that radio won't fit a 2005 gmc envoy. I'm assuming that is why I also have buy the mounting bracket?
The only thing missing is that they put the purchase link for each product. I have a 2002 blazer.
I have the same model did it end up working out for you?
Should I upgrade my 07 TB Bose front door subs with name brand shallow mounts and juicy amp, or would I be better off going with the traditional sub/enclosure in the back?
Ps really just trying to get something with backup camera, navagaion, and maybe android bluetooth. Don't need amp or sub woofers etc. Mainly a backup camera that is on the radion, not some extra unit. So thanks for your help. hope things are well in Provo. Randy
Which dark blue is the the wire supposed to connect to? There are 2 other blues but they arent solid like the one im trying to solder to.
What does the black OEM plug for? on a 2005 trailblazer. I have the gray and the black.
i have a question
the black wire off my factory amp i think its a rf wire. how do i hook it up to my after market radio. cause my factory amp isnt working
where does the smaller plug from the car connect to?
The small black one? It’s to your steering wheel controls
thank you for this video
Awesome video. I heard the mileage info may be stored in factory radio.. on. The trail blazer is that a myth or true?
False. Odometer value is stored in the EPROM on the cluster, it's the same with all GM trucks from this era. The odometer value might be written elsewhere, but if you put a junkyard cluster in a car it'll carry the donor vehicle's odometer value with it. jeffescortlx here on youtube has a number of videos where he repairs clusters, including pulling the EPROM values from a broken cluster and writing them to a donor cluster.
Did you just use a power drill to remove those screws, hellalazy
what is all i need to buy to replace completely stock stereo. Havent messed with anything i have a stereo to buy but do i need the wiring harness i have an 03 trailblazer
Thanks for this well explained video. Do you have a recommendation to replace the Stereo? I don't see it available in Amazon any more.
Any Brand name unit, here is one of our favorites: amzn.to/4bfGtVf
but i also noticed that you have a white rca plug. is that to the black wire. if so where do i get that adapter
What about that second connector on vehicle that didn’t get connected to the new harness? Does that do anything?
That is what I was wondering too. He never connected it to anything.
Hello from Venezuela My chevy trailblazer 2006 have steering wheel control which adapter i can install thank you
Hey so i have an 05 trailblazer wit bose system and remote start so only the front speakers work and nothin in the back i changed the head unit and still the same no sound i messed wit fade option and still nothin any info will help
What type of wire harness and chime retention unit would I need for a 2008 Chevy Trailblazer LT with the Bose stereo? I've had no luck even after spending a ton of money on several that were supposed to work with the Bose factory stereo with the Bose Digital Amp. I'm trying to swap out the factory stereo because mine is none functional ive tested another Bose stereo and there's power going to it but a touch screen with modern features would be great. Thanks for any help you may be able to provide.
Inordered the crux harnes plugged everything color coded and works when inturn key to acc on but no audio when i turn the car on... volume is low when i plug into bose but very loud when i plug into non-bose??? Help!
Just bought 05 trailblazer xlt. Would you know why the radio has nothing but all static. A radio station kind of bleeped in but signal won't stay. Tried to check antenna but it seems connected. Help, please.
I bought same wire harness (LC-GMRC-1). My head unit has an orange/white illumination wire. Do u know which orange wire i connect from the metra wire harness? I have a 2007 trailblazer LS.
My radio has an illumination wire. Can I just connect both orange wires to it?
dear, im having trouble after i installed an android screen on my trailblazer 2006.. an electric current buzz sound .. very load .. always on my front left speaker, and sometimes back right speaker .. the only thing i got to notice is that its starts when my bass sub kicks in after less than a minute .. sometimes its from the beginning .. sometimes it doesnt accure .. most of the time it does accure .. i need help ..
the guy who applied that screwn to me told me i need a sound filter right between the cables and the new screen to plus and that will filter out all of this .. would that work .. is that correct ?
thanks
Would you recommend I connecting both orange together
My car battery kept dying after I installed my radio. What did I do wrong
So i have the 08 blazer LT do i need a chime connector or whatever its called for single din or was it just cause you have a double din touch screen
If you remove the original radio you will need it no matter what aftermarket headunit you use
@@chickenfoundation9323 got it thank u
Can you recommend another harness for non Bose, no steering wheel controls and no onstar? The one in the link is currently unavailable. Thank you
I put in a aftermarket radio in my 2008 chevy trailblazer lt but I can't use it because I can't bypass the anti theft system how do I by pass it
can you tell me how to hard wire a aftermarket radio?
What is the part number for your Ridgid Handtool?
Any idea why after I did this with exact same wiring and had no audio?
Thanks for the reply. I have put in many aftermarket radios, but theses days with the chime system and onstar (which I don't use), trying to find a unit and all the extra things to install it can be a pain. So you say the Boss system would be good?
Can i use the same harness as you. No steering wheel controls, no bose, but has onstar. Of course onstar doesn't work and don't need it too. Thx
Yep!
Will the LC-GMRC-01 HARNESS WORK IF I HAVE BOSE AND ONSTAR AND STEERING WHEEL CONTROLS? THE CONTROLS AND ONSTAR WILL JUST BE INACTIVE? OR DO I NEED THE HARNESS FOR THE BOSE AND ONSTAR AND STEERING TO MAKE THIS WORK SINCE MY CAR HAS THOSE FEATURES?
No, with Bose you need the GMOS-04 smart module, and for steering wheel controls you need the ASWC-1 adapter.
Question would this same parts work my 05 trailblazer ext ls i only asked because I’m not sure if the EXTs are different
Thanks in advance
Yep, these work for all trim levels. Parts linked in description.
@@ProvoBeastAudio thanks a lot homie!
I owe a beer 🍺
On connector C for the camera which one did you put together for black pink and brown ? You don’t mention it and I can barely see when I stop and zoom
C connector - brown to turquoise and pink to green/purple for those that are wondering it will get the job done for 2008 trailblazer
Can you or share more of the wire diagram I’m using the same setup and I don’t want to make any mistakes
Lots of variables when wiring depending on the harness, radio, etc. If you want specific wiring help, send us a message on facebook / instagram and we can help.
Which one do I need to get for a 2002 envoy without bose , no steering wheel control, and it has onstar? Any help would be appreciated. Thank u in advance
Here you go! amzn.to/3WqkeoZ
Here you go! amzn.to/3WqkeoZ
Would you say this is still a great option for an envoy or is there better ones out there now?
Oh, not at all. Thsee no-name cheap Chinese radios are absolutely trash. I recommend a brand name unit for the best user experience, quality, and longevity.
I used the exact same products as you, but mine did not have the interface illumination tab on it, just curious if you remember what color it was or if you had to double up any wires
Sure, if none of the illumination wires pass through the harness resulting for the need to use the interface illumination wire, it doesn't hurt anything just to connect all of them together. Alternatively, you can use a multi meter or continuity tester to identify which wire you need and eliminate the ones you dont.
@@ProvoBeastAudio got it
So question. If I use the Joybring you are showing with reverse camera, etc anc 3wXv4V5 adaper harness I will maintain my steering wheel volume controls and the chime system.? I would like a unit with Navigation, also. When you check on the Boss system they want to know your RPO code so they know which harness to use. Any Idea on which RPO code they are looking for. the label in my glove box does not identify which code is for the bose system I already have. all this gets very confusing. thanks for you video and help.
Randy, send us a message on facebook or instagram and we can answer all your questions.
@@ProvoBeastAudio Okay starting over. Just about think it isn't worth messing with this radio change. My car is 04 gmc envoy xuv. It has factory GMC radio with Navigation. I need to know what radio would work for me with Nav, steering wheel controls, Onstar and my saftey chime system. Also want a backup camera, but can add that if the radio has the rear camera plug on it. Harnesses area night mare. PAC RP5-GM11 Wiring Interface has this one, but seems to be really expensive, but is the only one I can find that does it all. The new radio needs Nav and backup camera. Either Nav in the radio or the android play, but really don't like the cell phone idea, but can do it if that's all there is. If you read this please let me know if you have any ideas. Thanks, Randy
I've attempted to wire up the harness as described but not getting power to the radio.
Either you have the wrong wiring harness adapter or a blown fuse. Hard to diagnose over a UA-cam comment.
Hi,
It is a standard 2DIN size radio?
hi, i want to know what kind of wire adapter i will use, for 2006 gmc envoy? its have booss system, but there are no steering wheel controls.
I don't see a link. I have OnStar on my rearview mirror. I'm trying to install a touchscreen in my same vehicle. But I don't got any buttons on my steering wheel. Idk what hardware harness I need to get.
Send us a message on facebook / instagram and we can show you what harness fits your needs.
Which one did you end up needing ? I have the same question.
when I click on the Amazon link for the Joybring stereo, Amazon says it will not fit my Envoy 2004 ? any ideas?
Amazon's fit guide is trash! With the right install parts, it will work great. Also, that Boss radio is also budget friendly, and has a much better warranty.
I have a Bose system but no steering controls
hey your really recent do you have a wire harness?
HELP!!! I cant find the amp in my model!! I have one for parts and the amp is located under the passenger seat but in my main one there is no amp in that location or the trunk?? Is it possible my slt doesnt have one? *parts model is 2007 sle, daily is 07 slt both are envoys
Are you sure it has Bose? Check if there’s speaker in the dash
Does the on start sound work
Any idea if this would fit the 05 jimmy?
This radio is Junk, but a 05 Jimmy will accommodate a traditional double din, yes. Send me a message on instagram / facebook and I can point you in the right direction
Est-il possible d'avoir le lien pour le poste à savoir que j'ai les commandes au volant ! Merci
Does the Smart Harness do anything to activate the Red wire for power? I purchased a harness and wired to spec with my Dual radio and the Red wire out of the harness is not giving power when the ignition is on.
Yes. Your GM vehicle doesn’t have an analog accessory red wire as the “turn on” wire is data controlled, and so it has to be generated by the smart harness for the radio. Be sure to get the right harness for your vehicle.
@@ProvoBeastAudio I bought an envoy a while back where the PO had run a wire back to the body control module and pulled switched 12V power from one of the fuses there. It works, but definitely isn't ideal. If you have a Bose system you definitely need the adapter though.
I have a 2002 Bravada oldsmobile, even though it has Onstar system(Which is not activated and I do not require it) just as I would not mind not having the steering wheel controls, can I use the cheaper harness or do I require to use one that retains the steering wheel controls, also the speakers are not heard without the factory radio, with this harness will this be solved also?
I’m wondering the same question… did you ever find out???
You can use a cheaper harness that doesn't enable the features you want and it will still work, just won't be able to use the features because of course, you bought the harness that wouldn't let you use them.
I am looking for the actually 7 mm screws. What should I search for?
You can call your dealer and get the screw size as well.
Will installing this unit into a 2006 trailblazer LS interfere with the security system?????
I only think so. You could tell because the security light flashes on the dash showing it's active when you lock the vehicle, or at least shows that on my 02 TB LTZ
I did this EXACT install, I do not have SWC or Bose, but I do have Onstar. For some reason the radio is shutting off every time I open the door, WITH THE ENGINE ON. I plugged in my OE radio to make sure it wasn’t my door switch, it stayed on. Any ideas?
Shoot us a message on Facebook and we can assist.
dpes this imterface work with other steros?
Would a 6.8” fit the trailblazer 03-07 I think
Any standard size double din, regardless of screen size.
Hey guys. Had a car audio guy install this as per your amazon links: but the unit wont turn off when I turn ignition off. I have to manually turn off the unit so it turns off and I dont kill my battery. Any ideas?!
Send us a message on facebook and we can help diagnose why.
Do you have to have the smart harness because when I hook my stereo up in the car I have no power but when I hook the stereo up to the battery the stereo comes on
Yep you need a smart harness. See the video description for that info.
What if you don’t have soldering equipment 😭
Do I need both harness that’s are linked on description
No, one or the other depending on your trim.
Do you have any videos with steering wheel controls that confuse the heck out of me
I have a 06 gmc envoy Denali with steering wheel controls
@@chrisbarber1020 Yes I do, but also depends on the radio you are installing and the parts used. If you send us a message on facebook, we can certainly help you out.
@@chrisbarber1020 ua-cam.com/video/P8pX1ovL6Ts/v-deo.html
Also, if you are using an android based radio, in addition to wiring the steering wheel control connections, no-name brands also require you to manually program each button within the settings of the radio.
did u need to run an extra accessory wire to fusebox
No, no need to if using the right install parts. The smart harness needed (which we used in the video) provides the accessory for us.
@@ProvoBeastAudio since mine didnt come with the accessory wire do yk whoch fuse i could use to make it accessory power on thw fusebox under rear drive side seat fuse box
@@Dhill.angelI Which means you are using the wrong harness adapter if your harness doesn't have an accessory wire. If you refuse to use the correct harness adapter, you will need to use a multimeter to determine which fuse to tap into. IF you go that route, please do it correctly using an add-a-circuit.
Can i get a diagram for this truck
my radio still stays on after i turn off the truck any help?
Did you fix it?
😅I like my radio staying on when I turn off my car, but turns off once I open the door
@@demetriousstephens1998 yeah
@@slxmpedblendshow did you fix it
ادخل الى السيارة ثم اقفل الباب ثم افتحه
Where’d the backup camera video go?
In processing, haven't gotten it up yet. Will be up shortly!
Just because you requested, here you go: ua-cam.com/video/htV3MG-Fu7A/v-deo.html
Do you know what kind of butt connectors I would use? Since I wouldn’t be soldering
I have a 2008 trailblazer
18 -22 gauge red butt connections will work fine.
@@ProvoBeastAudio would u happen to know the order number?
@@zainramirez582 Here are recommended crimp caps: amzn.to/3aWvSEh
Or Butt connectors: amzn.to/3RNS8ki
My radio says Bose on the screen but I do not have steering wheel controls, I’m not sure what harness I would need
So I bought my harness, wired everything together, I have power, the radio works, but I have absolutely 0 sound. I’m not sure what’s up. If the wires for the speakers don’t have good connection? I’m not sure
@@haydenpeterson1385 Not familiar with your specific stereo...if there's an amp powering the speakers you may want to be sure the blue (remote) wire is hooked up correctly.
Hello, what did you use to join all the cables (What looks like black tape)?
We used heat shrink to cover out connections!
@@ProvoBeastAudio Thank you very much for answering, I found the "heat shrink tubes" in Auto Zone. However, he asked about me not being able to solder the cables (the red, yellow, etc.) How did you do it? Can I put black tape and mini heat-shrink tubes and apply the heat gun to adjust them?
what do i do with the smaller plug?
In most cases, it won't be used. Depending on the factory features of your vehicle, along with the different trims available, that harness may or may not have been used with the factory radio. They also may have had factory features no needed by the aftermarket equipment.
@@ProvoBeastAudio thank u had all the stuff for 3 months js haven’t installed it yet
The link amazon don't work?
Which link doesn’t work?
Will this work for the 2009 Saab 9-7x? Pretty sure it will but I just want to be sure! Thank you for this video man 👌🏽
Sure will! This was a big cookie-cutter platform for GM, so fits many different makes and models.
@@ProvoBeastAudio awesomeness, ordering through your links I appreciate you taking the time to bring this to us! 💯
02 trailblazer with Bose ? Don’t care if retains onstar is their a video on that??? Online schematics on wireing are iffy
If you have Bose, those part variations are also linked in the description. Install process is just the same, just using a different harness adapter.
wow no response ,,?
Randy, i get hundreds of comments a day over multiple social media platforms along with direct IMs and running a full install shop. I can't get to messages right away. If you need help and I don't see you comment, you can always reach out to us on facebook or instagram for assistance.
Hi I have 2005 chevy trailblazer LT WITH BOSS SYSTEM AND ON STAR . I NEED DASH KIT . WICH WIRES HARNES I NEED.???
i did the color for color but eont turn on, im also having the second factory harness not being used, why wont it turn on? do i need to tap a wire to something?
Depends on the, radio, harness adapter used, etc.
Hey Dude
05 Chevy Trailblazer Lt I would like to know where I can find that same radio system to replace the old radio with an aftermarket radio 📻 system in the SUV. Why do I ask I like it looks In the SUV. Could give me the model # I can find it on web site or here in the Houston TX area.
Everything is linked in the description of the video.
Hi I have a problem with wireing harnes for system with Bose
Crux swrgm-48 can not find this harness. Is there sone other options?