If you put one induction card in the provider/interface behind, all the cables in that subnet would provide energy to all machines, including the ones with export. It's a godly way of providing energy. The gates work too anyway
yes chosen, as the ender gates are bad for tps lag (doesn't matter much for you as your cpu is great but it's so noticeable on older hardware) as they are ticking tile entities, the induction cards cause 0 lag.
can you explain more? I mean you can't with the exporter you must export FE (in the exporter) to be able to pass energy. If you just put an induction card in an interface does not work as you said. Taking the video has "setup" those machines are "behind" the interface as subnet and they will not get power.
Heya Chosen and others, if you want a bit of an easier setup, that avoids requesting and is compeltely on demand, where you just have one of each machine (and one extra metallurgic infuser), here's the layout. Needed: 1 chemical storage disk (applied mekanistics) 1 enrichment factory 1 infusing factory 1 metallurgic infuser( can be base) Gas pipe/pressurized tube Patterns & providers The base mettalurgic infuser will accept extra, and ouput infuse type at the back. This needs to be extracted by chemical pipes and piped to the pattern provider as it cant auto eject. This will be stored in the chemical drive and is basically instant. You dont need a large drive as you'll never have more than a bucket leftover with this. From there, just need to encode patterns. E.g. one redstone -> enriched redstone -> 0.8b infused redstone. And then 0.1 infused redstone + iron = infused alloy. Same again for the others, and its done on demand. Can add more machines to the same pattern providers and they will load balance automatically. Enjoy!
Applied Flux is awesome, 5 machines around a single pattern provider, no pipes, no cables even on things like the infusers - well, if you use a chemical cell to store your infuse types, cause you don't have to pump it from another side if it's directly in a chemical form, you can just have it in the pattern and let the provider pump it into input side.
Hey chosen! An alternative to your refined Redstone set up would be to use requester. The advantage of those is that you can set them to craft 1000 if the number drops below 64, so you end up with a big batch instead of it constantly trying to create 4-5
Don't forget that you can put 5 acceleration cards in your molecular assemblers to make it just that much faster, that includes extended molecular assemblers
I'm playing this modpack for the first time, and accidentally went down the path of mekanism last night. I've never touched that mod before, so I'm scared :D
there is a event compact way for the infuser machines, just need 2 of them, 1 to convert items to it's infused fluid types and save to AE2, the for the regular mekanism jobs, and it allows to craft on demand
this game is so much easier with bees (+mystical)... i usually just rush a few refined obsidian bees to not have to worry that much and can just enrich it directly
I want to think that the remote malfunctioned and didn't shrink down with him, and so now the buttons are too big to press, and he's stuck this way, lol.
I've been finding those slightly awkward to use tbh. Too many times when I'm auto crafting multiple/different printed circuits they keep mixing the slots up and I have to go in and manually shift things around to get it to work again. Would be nice if there was a reliable way to lock the slots in these machines for each type of circuit.
@@AutriBanerjee that defeats the purpose of using the extended inscribes though as they are supposed to do multiple different ones at the same time. I'm hoping they just port the lazierAE2 add-on into the modpack the etcher (iirc) from that is amazing and can do the finished circuits from the raw materials (no need for the intermediary steps)
@@nielsgreen329 oh wow!! I’m glad you found it though. I could have suggested a name for it but it’s changed over the years and I’m never to sure what it is anymore!
If you put one induction card in the provider/interface behind, all the cables in that subnet would provide energy to all machines, including the ones with export. It's a godly way of providing energy. The gates work too anyway
Ill give that a try
yes chosen, as the ender gates are bad for tps lag (doesn't matter much for you as your cpu is great but it's so noticeable on older hardware) as they are ticking tile entities, the induction cards cause 0 lag.
Mine doesnt seem to be working with this
can you explain more? I mean you can't with the exporter you must export FE (in the exporter) to be able to pass energy. If you just put an induction card in an interface does not work as you said. Taking the video has "setup" those machines are "behind" the interface as subnet and they will not get power.
@@ChosenArchitect hi, I can't understand what the blue tubes are connected to, and the export buses don't work, can you help me?
Heya Chosen and others, if you want a bit of an easier setup, that avoids requesting and is compeltely on demand, where you just have one of each machine (and one extra metallurgic infuser), here's the layout.
Needed:
1 chemical storage disk (applied mekanistics)
1 enrichment factory
1 infusing factory
1 metallurgic infuser( can be base)
Gas pipe/pressurized tube
Patterns & providers
The base mettalurgic infuser will accept extra, and ouput infuse type at the back. This needs to be extracted by chemical pipes and piped to the pattern provider as it cant auto eject. This will be stored in the chemical drive and is basically instant. You dont need a large drive as you'll never have more than a bucket leftover with this.
From there, just need to encode patterns. E.g. one redstone -> enriched redstone -> 0.8b infused redstone. And then 0.1 infused redstone + iron = infused alloy. Same again for the others, and its done on demand.
Can add more machines to the same pattern providers and they will load balance automatically.
Enjoy!
Additionally, I have a video on the topic.
He's right, this one is WAAAAAY easier.
Applied Flux is awesome, 5 machines around a single pattern provider, no pipes, no cables even on things like the infusers - well, if you use a chemical cell to store your infuse types, cause you don't have to pump it from another side if it's directly in a chemical form, you can just have it in the pattern and let the provider pump it into input side.
I'm pretty sure you can press A to bookmark FE from your system and use that on the export bus
Still easier to use gates in that case though
Hey chosen! An alternative to your refined Redstone set up would be to use requester. The advantage of those is that you can set them to craft 1000 if the number drops below 64, so you end up with a big batch instead of it constantly trying to create 4-5
The atomic disassembler will always be my favourite paxel type tool
Mine too, everytime up until I accidently dismantle several machines.
Don't forget that you can put 5 acceleration cards in your molecular assemblers to make it just that much faster, that includes extended molecular assemblers
I'm playing this modpack for the first time, and accidentally went down the path of mekanism last night. I've never touched that mod before, so I'm scared :D
Very nice 👌
Always wonder if those basic gate can handle those Mid-game machines...it only can transfer little amount of RF
If my memory is true, with max upgrades, max usage is 2k * 7 slots, so 14k rf/t per machine
Those are hardened and support 5k rf/t but I can upgrade them if I need down the road
there is a event compact way for the infuser machines, just need 2 of them, 1 to convert items to it's infused fluid types and save to AE2, the for the regular mekanism jobs, and it allows to craft on demand
yes i did that in atm9 it's awesome and no need to calculate anything
I just used the refined obsidian seeds from mystical agriculture because i was too lazy to have 5 infusers lol
Shouldn't you be able to substitute the Export and Import bus in the Mekanism setup with Interfaces and use AppliedFlux that way?
The interface doesn't push items to the and mek doesn't pull from the interface
@@ChosenArchitect unfortunate
@@ChosenArchitect wait doesn't Mekanism Pull from Containers if the side is configured as Pull and Auto Push is enabled as well?
To use the export bus for power, keep it simple. Instead of using the induction card, try exporting the power
Wow, been a while since iwatch the series. since idk i wasn't big on ATM packs recenlty . stil ncie to watch fo the builds
APPLIED ENERGETICS
Is there a reason you are not using the wireless energy transfer method from draconic evolution?
this game is so much easier with bees (+mystical)... i usually just rush a few refined obsidian bees to not have to worry that much and can just enrich it directly
how do you power the primitive alloy smelter?
HIT THAT LIKE BUTTON
Drives me nuts that he stays small
Why are you still shrunk down in size for most of the video? Did you use the shrinking device and forget to turn back to normal size?
I want to think that the remote malfunctioned and didn't shrink down with him, and so now the buttons are too big to press, and he's stuck this way, lol.
Can u do a huge but compact extended inscribers setup for ae2 to get mega cells fast
I've been finding those slightly awkward to use tbh.
Too many times when I'm auto crafting multiple/different printed circuits they keep mixing the slots up and I have to go in and manually shift things around to get it to work again.
Would be nice if there was a reliable way to lock the slots in these machines for each type of circuit.
weird that never happened to me, maybe try only doing a single type of recipe for each inscriber?
@@AutriBanerjee that defeats the purpose of using the extended inscribes though as they are supposed to do multiple different ones at the same time.
I'm hoping they just port the lazierAE2 add-on into the modpack the etcher (iirc) from that is amazing and can do the finished circuits from the raw materials (no need for the intermediary steps)
does anyone know how to get that popup in the top middle of the screen to come back? mine has disappeared and i cant find a way to get it back.
Go to settings and look for the button to configure it
@@JamFusion. i found it. had to scroll almost to the bottem
@@nielsgreen329 oh wow!! I’m glad you found it though. I could have suggested a name for it but it’s changed over the years and I’m never to sure what it is anymore!
level emitter not new idk if it wasnt on ae2 but it was on ae1 when i played 1.5.2
ah it seems ya mechinisming
I have a love/hate relationship with mekanism
I love mekanism up until I either break the polonium PRC or I need the SPS.
Anyone remember thaumcraft
I love thaumcraft, I love the scientific feel of it
First
You are choosen architect and stop it pls
Next time just go creative