Great review! One thing that bugs me about most of the newer MG kits is the fix pose hands. I miss the old moveable hands from the 2.0 kits and others MG that had them.
It makes me feel better to know that I'm not the only grown man that assembles little plastic robots :P I was one the fence about this kit, but you helped me decide to get it. Awesome reviews! I'm gonna subscribe :)
jabman have you also noticed the insane amount of detail, for MG's that have been cropping up in these seed ones? I really like where this is taking the future of MG. Now I really hope for that Amatsu MG! Bandai can even be cheap and recycle most of the parts now!
Great review as always, i have seen other reviews and none say anything about the armor not fitting well. except the red on the side skirt, everyone's falls off.
Hey @jabman025, great review as usual, I was expenting that you compare blitz and deathscythe hell EW since they are really alike, oh well.. Hey, you have MG sinanju right? Why not re-review it? I would like to see if you can give any advice with the black parts that you must apply gold foil stickers
Great review, I bought this kit ( havent build yet, it's slow for stock to arrive in my country ) after watching your video. However...i would like to point out that your video recording device seems to be not able to focus fast enough, or doesnt has a good focus range. What was camera you use ? A bit pain for the eye = )
The V-fin on mine snapped in half when I was building the head. Other than that, I have no gripes with this kit. I've always liked the design so I'm probably biased.
at the moment im hoping to make a small display involving the 5 original mech's displayed in the seed series the strike,aegis,blitz,buster,duel and i cant wait to see them all together, will you be doing the aegis and buster review once there are out
hey jabman, question about the dry transfers, did you have to go over it with a coat of clear gloss or something? I haven't applied any because I am afraid that it will rub off
I know this video was made 11 years ago but the armor doesn't go together fully if you have the PC for the strike pack in the back armor piece of the chest inserted upside down. Had the same problem until I flipped it
I doubt it a 2.0 for Strike Gundam. If the entire GAT series are going to be reusing the Strike's inner frame, Bandai needs no reason to make a version 2.0.
What's the blueish stuff on the armor? Is that stress from the plastic or did you do it? Kinda looks like scotch tape but my eyes are bad and can't really tell on a youtube video.
I just bought this kit and it will be my first ever. Is this going to be too difficult? Did I goof up? Will this be the death of me? Do pigeons have feelings?
i have a question a noobie one this would be my 4th kit if i get it behind a RG Destiny and Exia, and a HG EW heavy arms is this about the same size as the 1/144 models?
no master grade kits are 1/100 scale so they end up being almost twice as big, they are also better detailed, more posable, and unfortunately more expensive
Ok so maybe im just poor at paying attention but it seems to me that im not hearing wether or not the fingers are posable or just interchangeable hands wich is nitpicky but i really do like the full posable hands.
love how detailed you are in your reviews. ima have to use some of your style lol
flat top coat would probably work best in my opinion, remember this is a military weapon..
Great review! One thing that bugs me about most of the newer MG kits is the fix pose hands. I miss the old moveable hands from the 2.0 kits and others MG that had them.
Some great camera angles there. Cool that he can have is arm outstretched with that wire and claw extended without drooping. Who want's droopy claws?
that's one nice looking kit, actually thinking of buying it.
It makes me feel better to know that I'm not the only grown man that assembles little plastic robots :P
I was one the fence about this kit, but you helped me decide to get it.
Awesome reviews! I'm gonna subscribe :)
the shoulders open to do mirage colloid cloak it did this in the assualt on that base in the first half of seed remastered
Really glad I got the premium providence that came with waterslides for this.
the shoulder gimmick is for the Mirage Colloid. But I don't remember the Blitz opening its shoulders to activate it in the show -_-
jabman have you also noticed the insane amount of detail, for MG's that have been cropping up in these seed ones? I really like where this is taking the future of MG.
Now I really hope for that Amatsu MG! Bandai can even be cheap and recycle most of the parts now!
great review jabs!! and what a great looking kit! makes me want it pretty bad! keep up the good work man! love the reviews!
Might actually get it later on, the Blitz was always one of my favorites in terms of its weapons and its color scheme.
the decals and dry transfers look great
Would have been funny if there was a piano built into the cockpit. Great review.
Great review as always, i have seen other reviews and none say anything about the armor not fitting well. except the red on the side skirt, everyone's falls off.
Who thought it was a good idea to put all the items ( gun rockets beam saber shield) on one shield?
Hey @jabman025, great review as usual, I was expenting that you compare blitz and deathscythe hell EW since they are really alike, oh well.. Hey, you have MG sinanju right? Why not re-review it? I would like to see if you can give any advice with the black parts that you must apply gold foil stickers
Great review, I bought this kit ( havent build yet, it's slow for stock to arrive in my country ) after watching your video.
However...i would like to point out that your video recording device seems to be not able to focus fast enough, or doesnt has a good focus range. What was camera you use ?
A bit pain for the eye = )
The V-fin on mine snapped in half when I was building the head. Other than that, I have no gripes with this kit. I've always liked the design so I'm probably biased.
at the moment im hoping to make a small display involving the 5 original mech's displayed in the seed series the strike,aegis,blitz,buster,duel and i cant wait to see them all together, will you be doing the aegis and buster review once there are out
Hey Jabman, have you tried putting the different Striker packs on the Blitz and Duel to see what kind of effect they can bring?
Hoping Bandai makes an MG for (at least):
ORB-01 Akatsuki Gundam [Oowashi ver]
ORB-01 Akatsuki Gundam [Shiranui ver]
ZGMF-X19A ∞ Justice Gundam (Ver. 2.0)
ZGMF-X20A Strike Freedom Gundam (Ver. 2.0)
ZGMF-X23S Saviour Gundam
ZGMF-X42S Destiny Gundam (Heine Westenfluss) (Ver 2.0)
ZGMF-X42S Destiny Gundam (Ver 2.0)
ZGMF-X56S/α Force Impulse Gundam (Ver. 2.0)
ZGMF-X56S/β Sword Impulse Gundam (Ver. 2.0)
ZGMF-X56S/γ Blast Impulse Gundam (Ver. 2.0)
ZGMF-X666S Legend Gundam
...Now we can reenact nicole "running" into Kira's sword now.
Still burns me that Z.A.F.T. stole Blitz and the others because they didn't want the Earth to have a chance at winning.
hey jabman, question about the dry transfers, did you have to go over it with a coat of clear gloss or something? I haven't applied any because I am afraid that it will rub off
+Thomas Yip watch this video I talk more about dry transfers here ua-cam.com/video/0vpLFGInqM4/v-deo.html
Any tips on those dry transfers? I'm about to order mines soon, and I guess I'm worried about messing up on the transfers.
I know this video was made 11 years ago but the armor doesn't go together fully if you have the PC for the strike pack in the back armor piece of the chest inserted upside down. Had the same problem until I flipped it
Is it like that by default? Like, do the instructions tell you to put it in that way and you had to then ignore the instructions to fix the issue?
@@BioGoji-zm5ph It's a rectangular pc like piece if I remember correctly, so it just happens to be super easy to put in upside down.
Jabman i cant decide if i want to get the infinite justice or the impulse. I was wondering if you could give me your opinion on which one is better.
I doubt it a 2.0 for Strike Gundam. If the entire GAT series are going to be reusing the Strike's inner frame, Bandai needs no reason to make a version 2.0.
I hope a Nebula Blitz comes out now!!!! Great joke Jabman!!! i watched it over and over and over and over.....
What's the blueish stuff on the armor? Is that stress from the plastic or did you do it? Kinda looks like scotch tape but my eyes are bad and can't really tell on a youtube video.
hi jabman, can't decide if i should use flat topcoat or glossy topcoat for this kit, do you think flat topcoat will look good on this kit? thanks!
Just ordered this guy I cannot wait for him to come in! He is my favourite gundam. He should come in this Friday
Jabman could you tell me if the plug for the shield on this kit is the same as the one on Aegis please?
Jabman Can you tell us how to use gundam markers?
will you ever review God Gundam ( I have one just want your intake on it )
I've never seen SEED, but that looks a lot like a Gear from Xenogears. It's neat, though.
I just bought this kit and it will be my first ever. Is this going to be too difficult? Did I goof up? Will this be the death of me? Do pigeons have feelings?
no this is not to difficult, most of the seed kits are good starter kits, no, no, maybe
***** Alright, thank you sir!
i have a question a noobie one this would be my 4th kit if i get it behind a RG Destiny and Exia, and a HG EW heavy arms
is this about the same size as the 1/144 models?
no master grade kits are 1/100 scale so they end up being almost twice as big, they are also better detailed, more posable, and unfortunately more expensive
***** Alright thank you! ill have to pass on this one because i dont want different sizes on my display, maybe it will become a RG? idk but thank you
Really hope that bandai would make the mirage colloid ver of blitz
They have, the kit is 100% clear plastic
jabman025 lol seriously? I was only joking about it. Never thought they actually did
how do you paint the gray part of the beam rifle? haha
Ok so maybe im just poor at paying attention but it seems to me that im not hearing wether or not the fingers are posable or just interchangeable hands wich is nitpicky but i really do like the full posable hands.
interchangeable finger sets, all the seed kits have them
Ah ok thank you.
This is very nice kit and this comes from some one who is not fan of SEED.
How do you do dry transfers?
watch this review, I talk about dry transfer techniques there ua-cam.com/video/0vpLFGInqM4/v-deo.html
I miss Nicole :(
which is better to get, the Blitz, RM Strike, or Epyon,
Julian Angelo Garcia super late but uhhh I went with aile rm epyon and then blitz
MY PIANO!!!!!!!!!!!!!!!!!! BOOOM!!!!!!!!!!
Does this gundam have the same frame of the strike remaster?
Hex A. Gon no
sweet
What model was that goldie arm?
LoftOfTheUniverse do you mean the gold frame amatsu mina? The gold frame (one armed bandit) stole the blitz's arm in the Manga
Those sticker style decals looks horrible on black plastic.
that is so asome!!!!!!!!!!!!!!!!!!!
8 more to go. :D
Damn 92...
sad nicol died :(