Maytag Dishwasher Repair - How to replace the Wash Impeller
Вставка
- Опубліковано 17 лип 2024
- Need help replacing the Wash Impeller (Part 99002069) in your Maytag Dishwasher? Watch this how to video with simple, step-by-step instructions for a successful DIY repair.
Stay safe during your repair! Be sure to check www.fix.com/safety/ for proper safety procedures before you begin. Use of this video is at your own risk, without liability to Fix.com.
Fix Part Number: FIX2099471
OEM Part Number: 99002069
Why you might need to replace the Wash Impeller:
1. Noisy
2. Not cleaning properly
3. Not draining
What tools you need for this repair:
• #20 Torx spit
• 5/16ths nut driver
The information in this video is specific to Maytag, Jenn-Air, Amana, Crosley, Magic Chef and Admiral. To find a Wash Impeller specific to your model, visit www.fix.com
Not what you’re looking for? For more dishwasher repair help click here: www.fix.com/parts/appliance/di...
Where you can buy this part:
www.fix.com/parts/dishwasher/...
Connect With Us!
/ fixdotcom
/ fixdotcom
plus.google.com/+fixdotcom
/ fix.com
Visit our blog: www.fix.com/blog/
Don’t forget to comment below and subscribe to our channel! - Навчання та стиль
I'm a 61 year old lady and this Video was great helping me repair my dishwasher. My impeller was broke so I'm purchasing a new and then going to follow video to put back together.
Tremendous video. This is the 2nd time I referenced it and succeeded both times repairing my 30+ year old Maytag. Friends who bought new ones are disappointed in the performance and regret not fixing it instead. Thanks again for the help!
I decided to do the same thing because it's not rusted. No smell. Cleans well it was here, when I bought the house. I think the inlet needs replacing and will have my son check the filter for debri. Water isn't coming in, after a floor leak, but it' still comes on without the water. Heating element still works too. Better machines than the new ones.
You’re the best! A gift to the community .
Excellent video! My model is slightly different, but I couldn't figure out how to remove the pump cover - the screws were obvious, but mine has a spray tower. Once I saw you remove the retaining nut, I realized I just had to unscrew the fixed (lower) part of the spray tower. This video was a lifesaver! (And I discovered I need a new filter)
Perfect video, my mother refused to get a new one and this helped me bring her washer back to life. Thank you.
Thanks for the video. Backwash arms were completely clogged. Step by step instructions are perfect.
Fantastic video. I didn't realize that two of the parts had actually fallen apart until I watched the video. I bought the two new parts and presto, magic, it's all together and working again. Thank you!!
Thank you so much. I had no idea how to do this until I obsessively followed your video step by step. Very coherent, sensible.
Wow Sir this was perfect, you saved us good money . Thanks
Liked your videos thanks helped me put mine back together. I'm great at ripping it apart then forgetting how it went together hehe
thank you came in very handy when I was fixing my dishwasher
Absolutely GREAT video! SUCH a help - and SO well done - I can't thank you enough:)
Great video. Thank you.
Very helpful Thank you!
Thanks for the video! Now I dont have to buy a new dishwasher and now it looks and works like new and all I did was tear it apart and clean everything.
Hello! We've been following your video to get to the filter but we can't seem to get the propeller off even after the screw was removed. Any idea?
Thx bro!
TY!
Nice
Would love to know how to do this on a dishwasher build this century.
Great video, helped me clean the filter and the area under the impeller. But I need instructions on fixing a Maytag dishwasher that won't drain. I cleaned these parts hoping it would fix the problem, the filter ring was pretty gunky. But it still won't drain and I don't know why. The dishwasher is a newer model with digital control panel but the inside looks the same as in this video.
Have you found a solution to this? I’m having the same issue.
why didnt you clean out the very bottom where those black pieces were ?
Thanks... we just did this after having a grinding noise... only used the video to see how to take apart.. did not replace parts... but now it leaks ???? What could we have done wrong ?? No more grinding.. found miscellaneous items and cleaned out..
My old dishwasher looks just like that one. It is a maytag jetclean. The problem that popped up is that the liquid gel detergent didn't all dissolve. The dispenser door did open but not all the gel was gone. I know the water ran in and drained, so what happened? Any ideas?
when my washer gets to the fist drain cycle I hear a electronic hum sound then it cuts out and does not drain. I don't know how this is supposed to work so any info would be appreciated.
the first water fill is completed then the motor works for first clean cycle. it looks like the same motor then does the drain cycle maybe in reverse spinning direction????
Where can I find this filter to replace???
Will this tactic help fix a dishwasher that isn’t properly draining?
This looks like mine
Has anyone had an issue with the propeller not easily lifting out after the screw was removed It feels like it is attached to something else.
Dooley Family yeah just now, I gave up trying to get it out after prying on it and it cracking
@@katotornado4312 we ended up putting WD40 on it over night and it came off fine.
The impeller removal is difficult on many of these Maytag dishwashers. I used a 50 cent coin to lay on lower tray, then a large flathead screwdriver to pry the impeller off. Unfortunately I snapped pieces off the impeller but did save the lower tray from any damage with the coin technique. You must pry around the impeller, bracing the flathead screwdriver on the ribbed areas of the impeller where there is more plastic to prevent breaking. This process took me about 10 minutes, and the impeller WILL come off. Be patient, and learn from my mistake. This Maytag dishwasher is a solid machine.
@@stevenwatson9678 I'm having that problem now. I soaked it in wd40 all night and it still won't budge. It must be rusted on. I'm going to keep the wd 40 on it today and try prying it off.
I have one like that. But the dishes are dirty at the end. What can I do?
If the dirt left on the dishes is bits of food particles I would be checking to see if it is filling to proper level. If the issue is more of a film being left I would check the rinse aid dispenser to make sure it is working ok. if you have recently changed the brand of detergent, that can affect cleaning performance as well. Ensure your hot water supply is at the manufacturer'ss suggested setting. At the end of the cycle check to make sure all the water has been pumped out of the dishwasher.
My May-die dishwasher quit washing. Stumbled on your how-to video here and said, "GREAT!!!" I didn't know the proper assembly so didn't know what was a screw fitting. Impellor was broken. New one on the way! Update... There was an EXTRA part inside the pump assembly that in NO WAY belonged there!!! It is not in your video and not on the parts diagram. It also was what likely broke the impellor!! I can only think that somebody worked on this in the past (we got it used) and did this intentionally. The dishwasher was previously very loud (4 years for us!) and now it's QUIET!!!