Twin Quad Carburetor Blast - 451 Stroker Dyno Tested
Вставка
- Опубліковано 11 вер 2024
- Nick's Garage Gear Shop
teespring.com/...
--------------------------------------------------------------------------
Nick's Garage Patreon page. Thanks for your support!
/ nicksgarage
--------------------------------------------------------------------------
Nick's Garage is on Instagram!
@nicksgarageofficial
--------------------------------------------------------------------------
This Mopar 4oo has been stroked out to 451 cubic inches.. and now, Nick will be dyno testing it with a fantastic twin four barrel set up. This one is going to SCREAM!
--------------------------------------------------------------------------
Nick uses lots of tools.. here are a few.
NewAge Cabinets
amzn.to/3o2qdOH
Sunex Worm Drive Engine Stand
amzn.to/3ojkD9o
Moroso Carburetor Drain Cup
amzn.to/3ic2yav
Lincoln Electric Handy MIG Welder
amzn.to/3lWTgBo
Moroso Jet Tool
amzn.to/3n0k1q0
Holley 36-181 Jet Assortment Kit
amzn.to/33bcgWe
Alert magnetic work light
amzn.to/3qe6dtE
ProLite hanging work light
amzn.to/2HDBp3U
NEIKO Rechargeable Underhood Light
amzn.to/3hV8N5s
ATD Tools Corded/Cordless Underhood Light
amzn.to/3kLUYIv
---------------------------------------------------------------------------------
Nick’s Garage is created with passion, and the following gear.
GoPro HERO7 action camera
amzn.to/2HAfCtv
GoPro HERO8 Action Camera
amzn.to/3cDf7u5
GoPro HERO9 Action Camera
amzn.to/34s5fjl
Canon XF400 professional camcorder
amzn.to/2EF0ABE
Canon 90D DSLR
amzn.to/3jaRZ8F
Manfrotto Befree Travel Video Tripod
amzn.to/33amqXm
Manfrotto Xpro Aluminum Video Monopod
amzn.to/33bpSAE
Rode VideoMic Pro+
amzn.to/2GaVJIR
Rode Microphones Wireless Go
amzn.to/2EEcV99
Zoom F1-LP Lavalier Body-Pack Recorder
amzn.to/2S2WiXS
Lowepro ProTactic Camera Backpack
amzn.to/3ib7End
Lowepro Multi-Purpose Backpack
amzn.to/2EDA63o
Nanuk 970 Waterproof Hard Case
amzn.to/34s8xmD
Dinkum Systems ActionPod PRO
amzn.to/2S8dFqo
DJI OM 4 Gimbal
amzn.to/346O6LH
Lume Cube Panel Mini Video Light
amzn.to/3ibSgqS
Lume Cube 2.0 Light
amzn.to/30bfFCw
Aputure MC Video Light
amzn.to/3cFcYOH
Litra LitraTorch 2.0 On Camera Light
amzn.to/348oL3Z
Apple iMac with Retina 5K Display
amzn.to/3i721ql
LaCie Rugged USB-C 4TB External Hard Drive
amzn.to/2EJq40S
Thanks for understanding that we have moved our Monday drop time to 5PM eastern. We hope this makes it easier for our viewers in western time zones to see the show fresh, while not disappointing too many of our morning regulars. -NG-
I like it.
Can't complain you have to take the good and bad ..
I replied already😎
Happy in Richmond, B.C.
👍
I love the no nonsense, no bs, no "IM THE EXPERT". Its The true sharing of knowledge and experience that makes Nick uniquie. Thanks Nick!!
Yes! 451 stroker baby! I'm putting my 451 together right now. Trickflows 240's, Trickflow Single plane intake and trick flow .600 hyd roller cam.
Did you finish your engine and dyno test it ?
I was on a chat line the other day. A guy on there wanted to swap his modified Edelbrock carb for a stock Edelbrock carb. He said the guy he got his carb from had modified it and it was running rich. I told him about the Edelbrock kit you can buy at the local Advance Auto Parts, Summit Racing or Jegs. Who knows if he believes me, I told him they are easy carbs to change the metering on. Don't have to drain the gas to change the metering rods or springs. I have had some luck right out of the box also. I put an Edelbrock Performer and Edelbrock 650 Carb with an electric choke on a Dodge Truck with a 318. He said the cold start stumble stopped and it idled so well that with the stock muffler he sometimes tried to start the truck when the engine was already running. He was happy that on cold days he could just hop into the truck, start it up and go with out sitting for a couple of minutes until it warmed up.
About 30 yrs ago, my cousin dropped one of those setups on a 383 he had in a Dart. I watched him run it up and down the Alley, of all places, as he was complaining it wasn't using all 8 throats. I shook my my head, and discovered that one of the carbs had the Idle Mixture screws completely shut, and the linkage between the carbs was way out. Eventually he just used a Single 4bbl and was much happier
I remember from my days bracket racing that the 'B' Mopar engines had a distinctive sound that I always liked. The drag strip is the final dyno test,lol.
Mopar's have a unique sound because the exhaust valve is so close to the port exit than the others.
The b motor has a shorter stroke and lighter rotating assembly so it revs quicker and usually identical rb and b the b makes more power factory performance motors not high end aftermarket
@@davenichols5156
1
@@davenichols5156 where did you get a b engine made more power then rb?
@@davenichols5156 My 440 6bbl RB factory motor would disagree with your "B motor makes more power than RB motor" post.
I am a big fan of the 383, and the 400 B makes the best FACTORY BLOCK to use for a stroker build if block strength is the most important factor. I have a 572 being built (4.5" bore and stroke) but to avoid any block strength issues or cap walking, I am using a Bill Mitchell Products aluminum RB block w/4 bolt mains. Like the owner of this motor, I am using the Holley 3x2bbl "Six Pack" that came on my 70 V-Code Roadrunner, but the Indy ModMan intake ported to Max Wedge port size (Trick Flow 270s). The carbs have been modded with Promax parts for easier tuning.
Nick, I really like this engine the best. Out of all of the engines you have tested. The single manifolds modern power vs the ol school duel four barrel cast iron intake.
The power it makes is awesome !!!
Those guys really knew how to build an engine back then. !!!
“NICK” you tickle me when you smiled on that last pull, I was smiling right with you Bro, I’m 65 and really like watching and listening to you when yer getting excited.
U R The Man 👍😎💪
Best car show on the internet!
Thank you.
Chrysler engineers of that era understood manifolds. The long cross rams with the carbs on the fender liners were done for torque not so much horsepower. Was designed to give heavy cars like Chrysler 300 letter cars better acceleration. When they started putting the big block in the lighter Dodge and Plymouth models for drag racing with the Max wedge in 62 they went to the short ram for better top end performance.
Yep, the long cross ram intake was designed for mid-range torque. Friend of mine had a 1962(?) Dodge Polara with that 413 version. It would push you back in the seat with a 60 MPH full throttle kickdown.
Chrysler siamesed the outer ends of the long ram tubes for higher RPMs HP in the race engines...
Back in the day I had a 4-speed 70 Hemi Cuda and I ran two Carter 750 cfm competition series carbs most of the time wile on the street. The motor had Cylinder Head Service modified heads, roller cam, and12.5 compression. It was an old SS/D motor that was run in a SS car out of Ohio. I used a stock intake for the street that had been extrude-a-honed and the car ran strong with no breakage besides valve springs from time to time. Love the videos Nick keep it up.
Its Nick Kanavaros from Vancouver B.C. . Awesome episode to see the differences between the 2 set ups. Thanks so much for doing all that for us and for the owner Julien . Just awesome
Great 451 engine. Ran very strong. Giassou Niko.
Nick's Garage is on a brand new schedule and this 451 Stroker is one hell of a tool there's nothing like the sound of a big V8 at full spool Nick has changed the carbs Undercover killer at large Keeping that old school look with performance that is off the hook Nick's Garage every Monday is alright in my book
Roberto on the late shift, his Rhymes are a great gift.
I was only about 14 in 69 but I got to ride in some 426 hemi roadrunners with two fours and I owned my own 69 roadrunner 383 Magnum my friend had a 68 Dodge charger RT 440 Magnum I worked on it for him all the time it would run 175 miles an hour those were the good old days!
I had one of those cast iron dual 4 barrel 383 intakes in high school. Surprisingly, it is a single plane intake. Mopar originally sold them with the 2 carbs and air filters. I had it on a 383 in a 1964 black Polara 500 with red and white interior.
Sweet! There is an opportunity to team up with an ASMR channel and put out a 10-15 min audio track of these beasts! Take it from cold start, idle to full power and back. Love the work, Nick and crew!!!
That intake manifold was first used on the 1958 350 cu. in. Fury. It’s funny that the 350 turned into the 383, and eventually the 400, and not a BowTie to be seen.
Don't forget the 361!
Best thing is that they are the same stroke and the 383had a Forged crank that was pilot bearing ready to go in the 400s big bore to really handle the RPM, but of course a stroker kit makes that point moot and it being a short deck saves weight and room also a very strong block
Dyno never lies. I remember some friends who boasted about ridiculous horsepower from their engines. I just kept it in. Laughing inside
I always had SBC or BBC in my cars, but seeing how easy changing an intake is on a Mopar big block makes me wish I could go back in time and gone to the DARK (Mopar) side. I use to dread putting distributor back in if I was alone, so much easier with two people. But Mopar's look so much easier to work on, and similar power too. Another great teaching video from Nick!!!
Takes about 10 minutes to change intakes it's the best design imo.
me too and i am a big block man.
what got me also was the wiring/front end ball joints or always wearing tires and no frame and dull other than the driveline
@@karlsracing8422 Do you re use valley pans?
@@auteurfiddler8706 I’m always curious how different people do intakes on big block mopars. Valley pan only dry? Valley pan only with sealer? Valley pan plus gaskets dry? Valley pan plus gaskets with sealer?
Morning noon or night the time is always right for a show from Nick's garage
I learned to rebuilt and tune Carter carbs at 8 years old , it was my third job pops taught me first was gapping plugs and points .
Oh btw that Challenger is gonna be one wicked ride!
A lot of people don’t realize is that Chrysler was a engineering powerhouse. They did a lot of engineering during WW2 for tanks and bomber aircraft. It’s my opinion they took all that knowledge learned, looked around and put to good use in producing performance engines and cars in the 50’s and 60’s.
Thank you for another great program! You have teach me a lot and I am 72!
Nick I have seen your videos before but i had a hard time sitting still and listening to your dialogue. But as I watched more I became accustomed to your style of dialogue. And I also saw how much you know and share. Now I watch this Mopar video and just really enjoyed it. I never owned or wanted a Mopar or Ford. I had a 47 Chevy inline 6 and stuffed a nice 57Olds 371 into it. After that is was all Chevy. 327, 396, 350, 427, 454, LS1, LS3, Gen5 LT1. I love your dyno room. your setup for information and the results. Great video, Looking down the carb throat is so informative. to see the fuel jet. Well Done Nick.
Haha.. you will be sounding like a Montrealer soon!
Thank you Nick much appreciated, she even cooked me a nice breakie of bacon & eggs with all the trimmings. That was rather impressive Nick and I'm sure Julian will be happy with those results thus far. Great tunes George. Stay safe and well all.
Many happy returns!
Thank you Nick.
Happy B-day.
Thanks Derek.
Yep and you?
Really really appreciate the 5pm eastern release time! Cheers
Any time is a great time to watch Nick do his magic! Bill from Linglestown, Pennsylvania
Wow ! That impressive for a Low-deck Big Block with that old style dual quad manifold/carbs. -Cool !
Finally, I thought I had missed another video, but here it is. I love the dual quad look, very old school. from the 60's. I have been waiting to see what the HP loss will be. Nick's Garage in the afternoon, different, but still the highlight of my day. Here we go!!!!.
Right on! Sorry if we mixed you up with the time change. We are trying a Monday afternoon drop now, to help the west coast viewers.
That old school look is the part Eugene and Nick did a pretty good job to.
@@NicksGarage No worries George, and I can understand why the time has been changed, to help those that are on Pacific time. Getting up a t 5:00am to watch a video and then going to work is kind of hard to do. Good thinking on the time change.
@@blinkie1523 I totally agree with you blinkie, and Nick did an excellent job as he always does. I have a Edelbrock CH-28 and a pair of 625 CFM carbs to do the nostalgia look if I want on the 500. I will probably stay wit the way the engine is right now, plenty of power and torque.
That will be handy if you go to shows and display the 500 though.
I've always appreciated this chance and your wisdom & personality. It's like a package deal to view videos here.
Nick lean it out just a bit and play with the timing, and twist it to 6400. It won’t hurt it especially with the stroker kit. My stock 383 bottom end went to 6,500 a lot.
As usual i love the Dyno room, it just goes to show how under rated these little B engines are
This engine is FAR from stock!
@@BuzzLOLOL the only thing in mine that isn't stock is pistons and cam lol it makes about the same power
Just now had time to watch. Every dyno video drives home two facts. 1. Nick is a treasure trove of knowledge for engine building and tuning. 2. The V8 cars available NOW are no..joke. Old stuff is stout and what I grew up on, but today we are..spoiled with 500, 600 and with Dodge now 800 crank HP with the Jailbreak '22 models. OEM eith a..warranty. what a..world. Kudos to you Nick for keeping the flame burning bright for the old school iron👍.
They have boost. That's why they make that power. The old school engine's did it N.A...
@@chriscatarcio2983 : Chris: Of course they do, BUT even NA cars now exceed the old "glorious" stuff. Two small examples. 392 gen III V8 with a..mere 485 HP (versus SC stuff now) exceeds the legendary 426 Hemi in stock "street" tune. Casual daily drive, 12 second car..stock at 4400 lbs in either Charger or Challenger. Should I even discuss 5.0 Ford Coyote V8? NOT dissing old cars, I was..baptized in a Ram Air III 67' GTO with open Hooker headers, sideways choking on tire smoke..wondering how the driver could..see where we we going. Loved it and was..hooked at age..12.The point is simply to acknowledge that today you have a plethora of choices that are 12, 11 or even 10 second cars..dead stock. Yes some are boosted, but back in the day there was nothing you could buy, drive ..every day, pop a set of drag radials on it and run the numbers cars can..now, completely..stock. Remember Nick has a HC Challenger AND the Kowakski 440 so...Exactly why I LOVE them..both👍.
Nick , I'm with you on having everything you need to keep working when you want without having to stop and runout for a small carb part . When you bought out all the needle and jet boxes , I let out a laugh and said to myself Nick is always a step ahead and on it . ....Great work Nick . As I said before and keep saying , your a Master Master Mechanic!!!!! Yall be good and take care Nick.
I used the same intake in a mild "Christine clone" build up based on a 400 block. Nothing special there, 440 source heads homeported, comp 21-227-4 cam with factory rockers and 1 3/4" primary hedman headers with 3" exhaust and mufflers. The intake was modified some, it was opened under the carbs cutting the four hole portion out and curved to the ports, making the plenum a bit higher. And then tapered four hole 1/2" plywood spacers were used under the carbs. It surprised me, making the best power of similar build ups I have done with that cam and with different intake manifolds, RPM, Torker2 etc. Close to 540 hp.
Finally!!!🎉🎊🎉🎊🎉 A 400 stroked to 451. I have 1974 400 4bbl and I'm wanting to gather any info on this motor and the variants from it. I'd sure to see a refresh on a stock 400 sometime. Great job Nick!!!💯😎
Late posting. No problem, I'm loving it the more! Thank you George and Nick and crew! Best video show on youtube hands down
Wow, thanks! We appreciate you making the time change with us.
@@NicksGarage Say hi to Roger from Prestige for me! LOL
I was wondering were is my Monday afternoon Nick's Garage at. Usually I see the video drop at around 3 in the afternoon here in S A. I'll just have to make adjustment to my memory about the new time. As always awesome show Nick.
Isky has brutal cams for that induction set up😊 I gave my 2four set up to Mr John Snyder for his charger .
Another satisfying Dyno video Nick and George! That Carter "Strip Kit" takes me back. I had a 1978 Dodge Magnum that I swapped a smog 400 for a fresh 440 that had lots of goodies in it. Atop the stock HP intake manifold was a Carter Thermoquad. I used the strip kit to change jets and metering rods til I got the perfect seat of the pants launch from the 8-3/4 posi rear end. No Dyno back then. It ran well and the Thermoquad had the phenolic base that kept the fuel cooler on hot days. No thermal lock ups.
Thermoquad runs like a top on my BBO.
Was always thinking that the thermoquad is an interesting concept just not enough experience with one to make a judgement of the carbs performance
This particular intake Nick was designed to compensate for the fact that at the time there were no large CFM 4bbl carbs yet. The only easy way to get around the problem back then was to run 2x 4bbs. IIRC this intake was set up to run 2x WCFBs. The adapter plates on the intake point to that.
Tuning dual quads for the street with a dual plane dual quad intake is a bit of a dark art these days but they can be made to work.
Really what I feel you need to get them to work is a single plane dual quad intake of modern design. A pair of those Edelbrock Thunder carbs are actually better than true Carter AVS carbs were and certainly more adaptable than the Carter/Edelbrock AFB for dual quad.
Over a single 4bbl the effort to get the dual quad to similar power is high and the rewards probably not worth the effort for most.
On a 440 I got excellent results from a dual quad Edelbrock CH-28 intake with AFBs but it took a lot of mucking around and it only made maybe 8hp more than an 850DP, a well modded Thermoquad on two single quad intakes ie a Torker II intake and a M1 single plane.
The TQ on the Torker was fantastic combo. It was just so simple and easy with little effort to get power from the TQ but I digress.
Back to my dual quad adventure, to me it was well worth the effort but ideally as mentioned, you need a single plane dual quad like you can now buy for a Gen 2 Hemi from Edelbrock but none is made for the Wedge.
I did get a bit more power with a dual quad dual plane intake with 2x 500 CFM Edelbrock AFBs but I wouldn't recommend it unless you like a challenge - which I do. I really learnt the limitations of the AFB style for dual quad and at the time wanted something like a hybrid of a TQ and and AVS. The Edelbrock Thunder wasn't born yet at that time and it is indeed the hybrid design you need for dual quad tuning ease.
I found for my setup opening the primaries together worked really well but I tuned it for that after much trial and error with the staged arrangement. Fuel economy was still acceptable when it was all properly set up that way.
Re low deck dual quad intakes, unfortunately except for the rare Edelbrock cross ram there isn't much in the performance stakes for the low deck dual quad aficionado these days.
Part of the dual quad tuning is recognizing Venturi vacuum at WOT is halved over 8 barrels vs 4.
There are two philosophies and both seem to work.
One way is 2x small carbs because it pulls a stronger vac signal thereby compensating for the Venturi vacuum drop over a single 4bbl, the other is 2x large carbs with big jets to compensate for the reduced Venturi vacuum signal over a single 4bbl.
Great info. Thank you.
This old boy forgot more than most think they know. His videos are great.
This video is fantastic it reminds me of the 410 small black Chevy's we built with dual carbs Yet we told everybody they were 283, we even had the old valve covers and a small balancer since we internally balanced A lot of the engines it was great stuff having people scratched their heads wondering how those little engines ran so well LMAO
Haven't seen Vacilly in a while what did you do with him he should be building things with you . I like the simplicity of changing the jet's on the carters than the holley.
ANYONE KNOW IF VACILLY STARTED HIS OOWN CHANNEL IF SO iIWOULD FOLLOW HIM ALSO IF NiCK WOULD PASS THIS ALONG TO HIM.
Vacilly left quite a while ago to start his own business with his wife if I remember .
Hey Nick and George & Krew, very much enjoyed watching Nick work the 451 through the paces. I fully understand the 4 barrel and modern intake bring more horsepower, but I agree with the owner on the 2 4 barrel old school setup and look . Nick you did a beautiful job with making that setup work and look so good under the hood . That's a beautiful engine setup and car !!!!!
I remember when the Edelbrock Performer series came out. Had a massive impact on the street scene. I bought one myself in the 90's for a small block Chevy.
Originally Edelbrock made them for the 440, but not for the 383. With the stroker kits becoming popular, there was a demand for a low block version. Edelbrock claims the low block Performer RPM has improvements over the 440 version, because they had learned more about the intakes by the time they came out with the low block version.
HAPPY BIRTHDAY, BLINKIE!!! You're catching up to me!
Thank you Douglas B
Hi Nick that's very impressive for a 1959 intake with dual quads.. Hey by the way I can't wait to wear my long sleeve shirt like what your wearing there and SPREAD THE WORD OF NICKS GARAGE PROUDLY... Have a great 👍 rest to the week Nick FROM THE BANDIT ....
the hour class we cant miss. only at the school of nicks garage. thanks nick and camera man. love the music as well,,
That under hood inline dual 4 setup looks AMAZING
Right!
Love that you built a 400b block stroker engine looks just like a 383 but more power and torque with it's giant bore!
Even for a 30hp loss id run the dual 4s. It looks original not to mention the cool factor. Thanks Nick this is a really cool and very informative video.
Exactly what I was thinking. You won't tell 30hp on the street when you're at that level, lose traction at 450lbs of torque or whatever so the rest means nothing. At a dragstrip 30hp might be 3 tenths...if you're bracket racing who cares! Cool factor x 10! (and I'm a ford guy who ran a f-28 2x4 intake with carters on a 302)
You could always Extrude Hone the intake manifold to get runner volumes up and get the power back
I bet a few spacer would help.
The editing and production just gets better and better, George. Nice work.
And the graphics at 19:55 made me lol!
You can tell that Nick is in his happy place.
Goooood EVENING!!!! Ha, there’s a switch for ya!!!! 😀 Great video, Nick and George!!!! It is interesting that the dual quad manifold didn’t lose THAT much performance: I was thinking it probably has slightly smaller passages, therefore mixture velocity is a little higher, and having two carbs sorta takes advantage of that. Anyway, it’s a little different with the start time, but, as I said before, that’s the ONLY difference, cuz the content is fantastic as always!!!!! Keep up the excellence, guys!!!!
Bon Jour/ Good day. This takes me back to my childhood when everybody was buying those "Shiny bits", and the Chryco kids got them stock from the factory.
Great test . I agree, I would go with the high rise and the 750 Holley. It even looks better. Back in the 1970s that was the setup you would have,if you could afford it.
I'd like to see what the high rise would do with something like a 1050 dominator on it. 750 feels a little small for this engine, in my opinion.
It might sound strange to some but sometimes it's about the "Coolness" factor instead of getting every last HP out of an engine. You have to admit that dual quad set up sitting in the car looks "Cool"!!
Yup that’s why I’m going with the same intake, you’re never going to be the fastest out there anyway!
Even kewler in a '62 Dodge!
Giasou Nikola,
Ma Mopar knew what she was doing when she fitted a twin carb low rise cast iron manifold on the 383 back in the late 50's.
Those 383 just keep giving more & more.
Again another 383 with more than
1 hp per cubic inch.
Great episode
Your number 1 Fan in Australia
Louis Kats from Melbourne Australia ☺ 👍 ❤
Impressive. Looks good too. I am sure the work you did to the water and oil pump make a difference too. Have a great week, thanks for the video, team .
Had an original offy dual 4 barrel spread bore intake for a b engine from the 70's that was never on an engine. Put 2 thermoquads on it but never did get to put it on an engine.
Some guy gave me a offer o couldn't refuse for it.
Still kicking myself
I remember those intake setups . They were really nice intakes . Had a friend with one in an 68 Chevrolet Nova ....Ran like a scolded Dog ....Those were the days !!!!
My '70 Dodge Dart Swinger drag car is powered by 650 hp 451 stroker. The carb is a single 1,000 cfm Holly Dominator. Interesting video, as always, Nick!!!
I've been converted. I've seen the light of Mopar. Because of uncle Nick. Thanks Nick
I believe you said the 2x4 bbl manifold was a single plane, and it is low profile. My understanding was single plane manifolds are best for hi-rpm performance as opposed to the dual plane which is more for street use. The Performer RPM manifold is light years ahead in design so it is better all around.
The Desoto Adventurer cars were the top line Desotos and they always had hi-po engines and the 1959 Adventurer had a 350hp 383 with the 2x4 bbl set up. I have photos.
Yes, that dual 4 has very very short runners, which makes for top end HP or at the very least extended RPM range.
I appreciate the fact Nick puts the effort into squeezing all out of the dual quad he can even though HE KNOWS that single carb dominates
Tunnel ram rules. Over a single four.
You mean high rise dual plane single carb. intake...
Nick, I love the show! this show especially!
I remember those old manifolds when I was a kid, that was "Christine's" intake and they weren't portmatched very well. Compared to just a few years later. Used a 9inch aubor to clean out the rough stuff from the intake to get 30 or 40 horsepower just by port matching them correctly
Great vidio . The rods are a bit small in back carb 🤔 great to "hear" them run again 🏁 Thank You Mr Nick🥂🏁
Hi Nick, hello from Vancouver BC, I was a subscriber before but when I changed iphones I lost channels. Anyway I back, and enjoy your channel, keep up the great work.
Welcome back .
From a looks stand point, dosen't get much better.
Thanks again for another great video. Dosen't get any better than Nick and crew in the Dyno room.
Thanks 👍
Very impressive Nick' very well done.
There's something so cool about dual quads... 😎 that's what I run on my 383 corvette.... and it works great and looks kick ass too....
BTW when I grow up I wanna be like Nick... and have my very own dyno. 👍
Good day Nick and Crew! Hope you all had a wonderful first day of spring!
Thanks for a great dyno run love them Mopars
What a great example of a tamed 451 stroker! That 451 really forces some pump through that intake ! 500hp and 534 tq! Without even trying. Makes a great daily driver with confused looks on faces with the hood up. I just think it looks really cool with the stock dual quad setup and i think hey thats a 420 hp 450tq 383 when i look at it, then prepare to be surprised at its performance, it'll always have an edge with those 451 cubes going. Great strong artistic statement this is.
Σας ευχαριστώ Νικ, που διδάξατε σε ένα παλιό ελληνικό νέο κόλπα.Η μητέρα μου αρνήθηκε ότι ο παππούς μου Νίκολας Ρόππας επιθυμεί να μας διδάξει τα παιδιά τη γλώσσα, οπότε ελπίζω να με συγχωρήσετε που χρησιμοποιώ μεταφραστή.
Translated: Thank You Nick, For teaching an old Greek new tricks. My mother refused my grandfather Nicholas Roppas wishes to teach us kids the language,So I hope you will forgive me for using a translator.
All Greek to me.
That big block should get right with the program!
This one will make the car move, that is for sure.
Nice to watch the jetting changes and the results from it. 👍
Another awesome, educational video Nick !! BTW, just like Rush, you ROCK!!! Take care & God Bless!!
I don't care what looks cool, I'd never throw away 30 hp for that. If anything, I'd cut the hood and add a tunnel ram, which ADDS 30hp, and looks even cooler. Which is what I intend to do on my 383 Satellite.
Technically George the Carbs are not twin’s In fact the setup is known as “Dual Quads” lol sorry I had to lol Love the 400! (Hey ask Nick will my 390take a small shot of No2.)
Sounds like someone found some ancient alien tech. ;) - good to see that
Love it, glad you presented this! Miss the sound of those MOPARS.
Glad you enjoyed it! More to come.
Nicks knowledge no’s no bounds. Super impressive and thank you for your insight
If you've never read Walter P. Chrysler's autobiography you're missing out on a fantastic journey from the legend himself.
*you’re
I wonder if a modern dual quad set up make any difference. Very respectful power even after the loss!
I hopoe you get it tune up and post some final number I am real curious to see what that 451 stroker will make with the two four when it dial end!
I sure would love to see Nick work his magic on the old F-134 4 cyl in
my old Jeep.
I love all your videos Nick. I wish I still had my direct connection parts and wish book. Thank you for the videos.
I want to give George a HUGE shout out for his amazing Audio and visuals! Nick has the best sounding and top down dyno runs I have ever seen and heard. Great job guys! This coming from a diehard GM guy. What a blast. Cheers
Thank you Rick. I will tell George.
I’d pick up some VP octaneium Nick for the high comp engine pulls it has been a godsend for my 10.5-1 5.9!
The top camera angle watching those carbs pull fuel is just beautiful, that motor definitely liked the longer intake runners. That was a lot of power to give up from the dual quads.
I was SO CONFUSED!!! I kept thinking "this is Monday, right "?! What, am I having a senior moment? OMG! Are Nick and George alright? Turns out that my senior moment was when you said about posting your videos later.... whew!
Sorry for the confusion, Gary. We knew we'd mess some folks up.
I like the first setup, single quad 👌
Customer's always right that definitely has an aw Factor opening the hood
Yeah.. people gasp.
I like to see two 1 inch open spacers on the dual carb if they would work.
I would 2nd that... should help the top end...
I did guess to myself 30 horse loss, just lucky. But I'm with the owner on the dual quad set up. Great eye candy at a show.😉👍👍👍👍
Right on!
Another great job from Nick.
Glad you enjoyed it
Happy Birthday BLINKIE!!!.
Thanks Eric.
Nick, I always learn things from you. Thank You! Merci!
So about the same loss as going from headers to exhaust manifolds. Good video as usual Nick.