Це відео не доступне.
Перепрошуємо.

TORO RECYCLER WONT START!? HOW TO CLEAN A KOHLER CARBURETOR

Поділитися
Вставка
  • Опубліковано 14 сер 2024
  • Hey guys today we are going to be Cleaning a Kohler Carb on a Toro Lawnmower.
    Please let me know if you have any questions.

КОМЕНТАРІ • 41

  • @carlosalbiter3940
    @carlosalbiter3940 Рік тому +4

    Nice video shout out to the camera guy!

  • @Jayman001
    @Jayman001 11 місяців тому +1

    Dude MAN! You are a freaking ROCK STAR😂

  • @donnieroberson6342
    @donnieroberson6342 5 місяців тому +1

    Dude, thank you so much! That was just what I needed...stay awesome!

  • @smckinneyiii
    @smckinneyiii 2 роки тому +2

    Thanks, won't start, you got me to dive in easily, removed carb cover, filter filthy w/fine mulch particles, cleaned that w/golf tee, each fold, brush didn't work, took carb cover screws off, hose off, carb fly stuck wide open, top mechanisms and connects filthy w/mulch, played w/worked mechanisms and connects into free play status. Reassembled started first pull.....again. Again thanks!

  • @MissMolly3377
    @MissMolly3377 2 роки тому +3

    You explained this and showed everything, so well. I really appreciate it. I have three older brothers, and one is a mechanic, and I hate to bug him all the time to work on my cars and mowers and whatever else. So, I am trying to learn some of this, for myself. So far, your video is the most detailed that I have seen. Thanks again. Now, I know I can do this on my own. I am learning so much from YT videos, on how to fix things. My neighbor just gave me a Toro mower that is in very good condition, however, I used it a couple times and it started acting up. I was worried about my gas, possibly being too old, and I am sure that was the problem. I figured it was either the air filter, fuel filter, or carburetor...now I know it is. It starts, but it won't stay running, now.

    • @moxiemowers3851
      @moxiemowers3851  2 роки тому

      Definitely a fuel/carb issue!!

    • @boninm252
      @boninm252 Рік тому

      Clean it out again. Make sure you clean out all the little orifices.

    • @philliphall5198
      @philliphall5198 Рік тому

      First thing to do is dump your fuel tank and storage tank/can

  • @DeeGeeDeFi
    @DeeGeeDeFi Рік тому +2

    With your help, I successfully took the carb apart and cleaned it up, now it stays running strong! Turns out, there was a bunch of jelly-like crap in the bowl! It needed a cleaning!

    • @moxiemowers3851
      @moxiemowers3851  Рік тому

      Awesome! Glad I could help. In the process of making more videos!

    • @philliphall5198
      @philliphall5198 Рік тому

      Don’t add fuel conditioner
      Dump tank and run engine until it dies

  • @dennisavant2833
    @dennisavant2833 2 роки тому +1

    Thank you so much. I got the same mower and same problem. I will try to fix it. Didn’t know about the hidden jets.👌

  • @talentfromgod
    @talentfromgod Рік тому +1

    I try to always use nitrile gloves for protection and eye protection is not a bad idea since that carb cleaner can really burn the eyes if spray gets in :).

  • @luckydog-287
    @luckydog-287 2 роки тому +2

    Thanks for the video. You rocked it.

  • @riffharder1
    @riffharder1 2 роки тому +1

    Very well explained and shown. Thanks!

  • @philliphall5198
    @philliphall5198 Рік тому

    Thinking it’s brass jet but your right about being very cautious
    Great job on video and repairing it 😊

  • @lukaround
    @lukaround 3 роки тому +2

    Nice video. One suggestion is, it will be helpful, if you can list the tools and the spray you used. You mentioned the items you used while you are working in the video, but you are very fast (at least for me). Appreciate it.

  • @DrLaFuria
    @DrLaFuria Рік тому +1

    That guy......good video bro

    • @marcellusripley5448
      @marcellusripley5448 Рік тому

      Nice vid.. especially "THAT GUY"!!! OVER 50 TIMES!LOL 😂 THANKS!

  • @iNeverHadMercy
    @iNeverHadMercy Рік тому

    Awesome DIY video....thanks !!

  • @bretttheriault8778
    @bretttheriault8778 2 роки тому +2

    Nice details..great video....But..,! What about the pilot jet ..? that is very important...

    • @mariobannano6592
      @mariobannano6592 2 роки тому +1

      Thats the only one he didn't take out, I did everything he did it starts n stall. He didn't take out little rubber jet. Maybe thats the problem.

    • @moxiemowers3851
      @moxiemowers3851  2 роки тому

      @@mariobannano6592 most likely is poor gas or did not clean good enough the pilot jet would cause surging if dirty.

  • @fitbunch6692
    @fitbunch6692 2 роки тому +1

    My only regret is finding this video in the recommendations after watching a video on how to take apart the other version of the same mower’s carb lol

  • @user-kc2mv6gu4t
    @user-kc2mv6gu4t 3 місяці тому

    did you have to take the gas tank and puller off to get to the carb?

  • @mjshuja1948
    @mjshuja1948 Рік тому +1

    👍👍👍👍👍👍👍👍

  • @philliphall5198
    @philliphall5198 Рік тому

    I’m only going to pull three times
    That’s should be the most to get it started, spark checker will tell me where to start

  • @philliphall5198
    @philliphall5198 Рік тому

    I still use acid dip and ultra sonic cleaner, really takes both sometimes ,
    Or just replace carb and keep old ones for parts

  • @cijones7666
    @cijones7666 2 роки тому +1

    Thank you so much! Very helpful and a very nice video. You don’t happen to have an oil change video for the same mower do you?

    • @moxiemowers3851
      @moxiemowers3851  Рік тому +1

      I do not. But will think of uploading one!

    • @millikenway
      @millikenway Рік тому

      Buddy, I m waiting for it. You explain so well, two thumbs up, from Toronto.

  • @coachjosephseahorn2853
    @coachjosephseahorn2853 Рік тому

    Good information , I did all of that and my mower still would not start. Could it be the ignition coil and have you ever had to replace one? maybe you can add that to your videos.

    • @MrGoogle239
      @MrGoogle239 10 місяців тому +1

      My Toro needed many pulls to start. Check the carb flap angle when cold. Mine was not closing enough, had to adjust the lil spring that was on top of the carb, not all carbs have this lil spring. But by reviewing the carbs flap you can see the problem. Perhaps warm up spring it the issue, see if you can adjust/lube something to get the carb to close more for cold starts. Actually it's all very similar to understand, so don't be afraid.😮

  • @jddomino6230
    @jddomino6230 2 роки тому

    Great video , what is the name or link of the tool you used to clean the carburetor holes?

    • @moxiemowers3851
      @moxiemowers3851  2 роки тому

      www.amazon.com/gp/product/B0894MTSJZ/ref=ppx_yo_dt_b_asin_title_o02_s02?ie=UTF8&psc=1

    • @cijones7666
      @cijones7666 2 роки тому

      These are common tools for oxy-acetylene rigs and are easily found at any welding supply or hardware store.

  • @MrGoogle239
    @MrGoogle239 10 місяців тому

    As I watched this one part a few times, it looks like the emulsion tube was put in backwards, the thin end should go in first! Did anyone else see this! Or did my eyes decieve me? 😮

    • @moxiemowers3851
      @moxiemowers3851  10 місяців тому

      That's your eyes. It would not run like that.

    • @MrGoogle239
      @MrGoogle239 10 місяців тому +1

      @@moxiemowers3851 That Is what I thought too. Guess my eyes did decive me. 🤔

    • @MrGoogle239
      @MrGoogle239 10 місяців тому +1

      Figured it out, the E tube has a Rim on Both sides, that's what I forgot! I saw that rim and thus thought it was the fater end, 🙄.