Thank you for the comment! We actually do have many videos covering live events. Check out our playlists of "Event Videos" and "Mixing the Band"; hopefully, you will find some good content there.
Thanks for the reply. I'm not sure if 3rd party plugins can be installed. You may want to try this Presonus support site: forums.presonus.com/index.php It's possible someone has posted a question covering your question; as well, you could try posting your question there. Hope this helps.
Thank you for your comment. I think an iPad would work. As long as the iPad has access to the Presonus console and to the internet (with your Presonus login) at the same time, it should work.
Hi there ,do you know a way to "loopback" audio back to a DAW on the series 3 plz? For example ,i use Superior Drummer multi out.i'm trying to route kick,snare etc to individual channel on the mixer and send all those individual channels back to my DAW to record as audio track.Presonus customer care could not help me 😅
Good question. I have little knowledge of the DAW functionality of the consoles. You mentioned you contacted Presonus customer care... Have you tried posting your question (or searching for your question) on the Presonus forum -- "answers.presonus.com" There's a lot of users on that forum. It's possible someone may be able to provide you an answer.
Good question. I have no idea if the console can control a UAD. I am thinking it probably cannot. You may want to try posting your question on the Presonus forum.
You can use them but you need to be connected to a computer and your DAW. So to use them live, you would need to take a laptop or something with you. Essentially, you run your audio through the desk, into your computer which does the processing, then back to the mixer and out to your PA.
I just followed the process for SL32 III . But able to activate RC500 Comp, VT1 Comp, RC500 EQ and VT1 Eq only. Any suggestion to get the others on the board please?? Btw Thank you for uploading informative videos.
Thanks for your comment. Sounds like an odd situation Is the firmware of your console current? Many times (with computers), firmware revisions can fix (and cause) problems.
That is very odd. Looks like you may want to open a ticket with Presonus. Unfortunately, I do not know that much about the software side of audio to offer any other suggestions.
We use a crossover for the subs; no need to feed those with a separate mix. Though, if you are needing to setup a separate mix, you would just use one of the "flex-mix" layers as an aux, sub-group, or matrix. We have another video on our channel that covers how to setup an aux, sub-group, or matrix mix.
Intenta reiniciar la consola. Además, asegúrese de que el firmware esté actualizado para la consola (consulte el sitio web de Presonus para conocer el firmware actual). Si los complementos aún no están allí, es posible que deba abrir un ticket de soporte con Presonus.
Love your channel, very exciting stuff. Would love to see a video on how you mix while band plays
Thank you for the comment! We actually do have many videos covering live events. Check out our playlists of "Event Videos" and "Mixing the Band"; hopefully, you will find some good content there.
This is great. Thanks for the video. Is it possible to load 3rd party plugins?
Thanks for the reply. I'm not sure if 3rd party plugins can be installed. You may want to try this Presonus support site:
forums.presonus.com/index.php
It's possible someone has posted a question covering your question; as well, you could try posting your question there.
Hope this helps.
Awesome video! Do you know if this works with third party plug ins like waves?
Good question. I have no idea! That may be a question for the Presonus forum. Thanks for your comment.
Hi can i use an ipad to do this ?thanks for all your tuto just great sir🙏🙏
Thank you for your comment. I think an iPad would work. As long as the iPad has access to the Presonus console and to the internet (with your Presonus login) at the same time, it should work.
Hi there ,do you know a way to "loopback" audio back to a DAW on the series 3 plz?
For example ,i use Superior Drummer multi out.i'm trying to route kick,snare etc to individual channel on the mixer and send all those individual channels back to my DAW to record as audio track.Presonus customer care could not help me 😅
Good question. I have little knowledge of the DAW functionality of the consoles. You mentioned you contacted Presonus customer care... Have you tried posting your question (or searching for your question) on the Presonus forum -- "answers.presonus.com" There's a lot of users on that forum. It's possible someone may be able to provide you an answer.
Possibly a stupid question but can I use and control my UAD plugins with the Studiolive 32sx or sc? And if so can I adjust them with the touchscreen?
Good question. I have no idea if the console can control a UAD. I am thinking it probably cannot. You may want to try posting your question on the Presonus forum.
You can use them but you need to be connected to a computer and your DAW. So to use them live, you would need to take a laptop or something with you. Essentially, you run your audio through the desk, into your computer which does the processing, then back to the mixer and out to your PA.
Спасибо🙏💕
Пожалуйста!
I just followed the process for SL32 III . But able to activate RC500 Comp, VT1 Comp, RC500 EQ and VT1 Eq only. Any suggestion to get the others on the board please?? Btw Thank you for uploading informative videos.
Thanks for your comment. Sounds like an odd situation
Is the firmware of your console current? Many times (with computers), firmware revisions can fix (and cause) problems.
@@stageleftaudio thankyou for that instant support. I hope it's the latest one. I'll still be checking on that and let you know about it :)
I just checked the Firmware is updated. Still they are showing four plugins only.
That is very odd. Looks like you may want to open a ticket with Presonus. Unfortunately, I do not know that much about the software side of audio to offer any other suggestions.
@@stageleftaudio no problem, you've done your part already :)
Thanks a ton!
If I own Waves Diamond plugins, can these be installed as well ??
I'm not sure. You would need to check with Presonus for what they support.
جميل جدا جدا
Can this be done over the usb port?
I'm not aware of USB being an option for the installation. You may want to contact Presonus to get a confirmation on that.
how do u create a mix to feed the subwoofers
We use a crossover for the subs; no need to feed those with a separate mix. Though, if you are needing to setup a separate mix, you would just use one of the "flex-mix" layers as an aux, sub-group, or matrix. We have another video on our channel that covers how to setup an aux, sub-group, or matrix mix.
Puedes ayudarme. Según ya me salen instalados pero no hay nada !! Puede ayudarme ??
Intenta reiniciar la consola. Además, asegúrese de que el firmware esté actualizado para la consola (consulte el sitio web de Presonus para conocer el firmware actual). Si los complementos aún no están allí, es posible que deba abrir un ticket de soporte con Presonus.
@@stageleftaudio gracias ya puede !! Como recomendación para los demás no puede estar conectado el USB y la red al mismo tiempo !!
¡De nada! ¡Gracias por la información de la red USB!