How to change/modify 6 Tone Car alarm siren
Вставка
- Опубліковано 7 жов 2024
- In this video I show you how to change your 6 tone car alarm into 3 tones, you can change as the order of tones that you want to play when your alarm goes off. This will work with most of the sirens that are 6 tones, you can either cut the black and white cable if you dont want to go through all this so your only tone will be the first one.
Didn't know you could do this. The tones you turned of are the exact ones I cant stand. Great job.
Thanks for making the video! It helped me determine where to solder the incoming Red/Black power wires. For the rest of the video, focus and light need a lot of attention. It was very helpful, but the lack of light hurt your ability to focus. Please make more videos!! Thanks!!
I like having all 6 tones. Never hear them where I like live. I also like the first tone with the manufacturer beep beep alarm. Thanks for the video! :)
Good video I will add this use a small pair of side cutters and if you use a nail clipper you could get a small screw driver to lift the looped wire to have better access to cutting it off.
Maybe if you turned on a light people could see.
Brilliant, thank you. just the information I was looking for.
Man, thanks so much!
I hated that stupid siren.
I asked if it could be done and I was told, "No."
I didn't read the box because of the small print, until I saw this video.
I even considered putting in the BMW siren but thanks to you, I cut the black and white wire and Im stoked. I'll have the alarm installed next Saturday and I'll surprise the installer from Best Buy with that upgrade.
I still want the BMW sound so if you can make the 4 wires BMW siren work, please make a video.
Thanks again brotha!!!
Just did mine thank you for the video
They did this for me at Advanced Stereo I wasn't sure how he did it but it looked like he unscrewed something on the back of the siren It was the Viper with the blue pager Nice video thumbs up!
Great Video. Please can anyone advise me of the part number that is printed on the chip ( Integrated circuit ) I need to replace the chipo on my siren with a new one. thanks
thanks for the video bro.
But you could've put jumpers in so that you can easily change the tones you want in the future
Would it also change the sound when you lock and unlock the car? (the 2 times when you unlock and 1 time when you lock)
Thank you
Thanx bro
Cool
not really sure, I have not had the time from doing it on mine. I dont think it will since it has a soft chirp has it own wire. But if you do it let me know or I will when I get the chance.
Can you serious remake this video but not in a dark room? We couldn’t see anything you were doing bro...
Urn on your light..
I have a wireless car alarm, the siren has a black and red right to the battery, a remote box in the car triggers off the siren is there anyway I could open that up and connected to my horn
my car is producing first of these 6 sounds when locking and unlocking instead of making "puk puk" sound. should i delete all tones??
Hi, How about changing the tone for the warning alarm?
Where can I get one of these inhave a DEI and it doesn't separate
I want to install a basic alarm then change the siren to a BMW siren
El ic es el m3766?
You just cut the yellow wire right
लाइट से alergy है क्या
why is the alarm so slow?
Question if i cut all except tone 5 will it work
yes it will work. That is what I did.
Can more than three be cut?
Yes, you can cut as all the ones that you do not want. But if you cut all six, then the siren will not sound. You can cut 1 or 5 in any combination, test out which ones you like and which ones you dont.
MAYBE TURN A LIGHT ON PUT ANOTHER £1 in the metre
No light ... sometimes out of focus.
Quit mumbling, ese.
+Geo T Quit hating and watch the video or fuck off.
HowTubeExpert Keep Calm and FUCK! CHERYL GOMES FOUND ABRAN.
Terrible lighting
Poor lighting
que mal ingles xD