✨ Front Load Washer - F20 Error - EASY FIX ✨
Вставка
- Опубліковано 10 лют 2025
- ✨ Front Load Washer - F20 Error - EASY FIX ✨
How to easily clean out the water inlet filters to get rid of the F-20 Error.
QUICK AND EASY APPLIANCE DIY REPAIR VIDEOS - SAVE BIG $$$ BY FIXING IT YOURSELF✅
✨ If the video was helpful, remember to give it a Thumbs Up 👍 and consider Subscribing. New videos every Saturday ✨
-Subscribe Here: / @scottthefixitguychannel
🛠- Do You Need Any Additional Help? Become A Member of Our Channel Today and Get LIVE HELP from Scott With Your Appliance Repair. Pick #1 FIX-IT FAN for Just $4.99 and get Text, Zoom, Email or FaceTime Live Help. Non-Members pay $45.00 for Live Help. Just $4.99 for Channel Members. Click Here to Join Today: / @scottthefixitguychannel
-Facebook: / scottthefixitguy
-Twitter: / scottthefixitgy
-Instagram: / scottthefixitguy
-UA-cam Channel: / scottthefixitguychannel
-If My Advice Has Helped You…
Please Click Here To Donate: www.paypal.com...
Donate with Venmo - Click Here:venmo.com/Scot...
⚙️-Great Place to Buy Tools and Common Parts used In This Repair: amzn.to/4hfALW5
-Need Expert Appliance Repair Help Today? Click Here:asqme.com/@sco...
-Good Place to Buy Parts: bit.ly/3wD4L5W
-List of Tools used by Scottthefixitguy: • ✨ Scott The Fix-It Guy...
-Need More Expert Help with Your Repair? Click Here To Schedule a 15 Minute Meeting with Me Using Zoom 💻 : calendly.com/s...
Disclaimer:
Because factors beyond the control of Scottthefixitguy, I cannot guarantee against improper use or unauthorized modifications of this information. Scottthefixitguy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Scottthefixitguy recommends safe practices when working on appliances and vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Scottthefixitguy, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Scottthefixitguy.
Thank you 😊 *
*
🐔 Check Out Our New Channel Dedicated To Showing How To Raise Your Own Backyard Chickens: / @raisingbackyardchickens ***
***
Scott The Fix-It Guy - Appliance Repair Videos Do you need More Appliance Repair Direct Help from Me? Visit me at:AsqMe.com@ScottTheFixItGu and I'll help you get your appliance working again quickly.
Worked a charm! Thank you so much! It was driving me crazy and I thought I was gunna have to hire someone. You made my day and saved my washer and money!!!! Thank you so much!!!
You’re very welcome 😊
Followed the instructions, fantastic, my washer is FIXED !!!
Awesome,
Thanks Dana😊
Replaced the water valve on mine, ordered from Amazon, $20 . Works great now. Very simple repair.
Nice job😊
Very well done video, great details. I appreciate a lot. I have Kenmore Elite he washer which accumulates off white soft sandish substance at the filter inlet screen for the cold water every three years. I just cleaned it (it was about 1/8 of a teaspoon) after a few months of f20 which was appearing at 17 remaining minutes (just before rinse) to within 15 minutes of the normal washing cycle start (during wash) lately. No deposit at hot water inlet screen found on my washer. I had to clean the hose openings also with a brush and then running some water through it as shown here. Just to add, after f20 we did separate rinse cycle which went through fine without error. Also when error appeared during wash, a circuit breaker restart and another new cycle went through fine. This was before cleaning and dealing with f20. Thanks very much again for this handy video.
Nice job,
Thank you😊👍
You just saved me a ton of headache! Mine was calcium buildup. We have very hard well water here!
Gotcha,
Nice job😊
Well done. Your is the perfect length and very informative. Thanks for posting it.
Just wanted to comment that I had a clogged screen with an unknown substance much like you had described.. I cleaned the screen and got the same error code in the next load of wash. I took the hoses off and the screen was clogged again! after some investigating, found that my cold water hose had some junk in it. Both hot water and cold water was clean from the shutoff - but the cold water hose had somehow accumulated junk/brown algae? Replacing that hose and hoping it solves the problem. Just wanted to pass along in case anyone else has similar situation. Thanks for the video!
Got the F20 code on a used set I just bought. Went to pull the screens and realized I never turned the hot water valve on…. Oopse thanks for pointing me that direction
Thank’s So Much Matthew, I’m so glad it worked and saved you time and money😊 I hope you’ll click here to support us by joining our Channel: ua-cam.com/channels/7fBqy8806u1r0NpPv_fQ2w.htmljoin
You’ll get Live Appliance help when ever you need it.
It’s just $5.00
Excellent video! Thanks!
You’re welcome
Scott nice job. Thank you
Thank you😊
Lots of great tips, thanks.
Thanks so much😊
🙂Thank you!
You’re welcome 😊
Thanks. Very thorough video. Maybe you can share some insight here. My machine gets a F20 but only on larger loads. I’ve done all that you showed in your video.
Any idea what could cause the F20 only on larger loads?
I would replace the hot and cold inlet valves 👍
Scottthefixitguy Will do. Thank you for your reply 👍
My washer is coming up FH help
Think i cut my hot water off
Did everything recommeded...still f20
I was able to solve F20 on my Kenmore washer. I have written some steps in comment here if you like to review.
I've been working on my Maytag front load washer Epic Z for about 6 months. I'm trying to get it working but nothing's happening. I don't know how to search for codes BUT, I replace the pump and replace the drain but as a I plug it in turn it on it will start acting like it is going to complete as soon as I turn it on it comes on and it fills it with water...... it'll wash for a second and then it'll just cut off I had to clean my filter out it was full of trash and stuff so I cleaned all that out and I thought that would fix the problem but now all it does is it soon as I hit start it automatically shuts off it'll run for a minute and then it shut off the water still sits. I've tried to do everything, UA-cam everything I still cannot fix the problem HELP ME PLEASE.......
Maytag epic z front loader MHWZ600WR00
It doesn’t show any codes?