How To Find The Center Of A Circle Using A Square

Поділитися
Вставка
  • Опубліковано 5 жов 2024
  • Thales' Theorem is a great way to find the center of a circle using just a square and a writing instrument. I'll also show you how you can prove this theorem to be true.

КОМЕНТАРІ • 47

  • @prh8068
    @prh8068 3 роки тому +10

    Well done and thank you! As a retired high school math teacher I loved your geometry! Technically you proved that "if an angle is inscribed in a semicircle, then it is a right angle." What is really needed is the converse statement, "if a right angle is inscribed in a circle, then the endpoints of the chords form a diameter." The proof of that converse statement is actually much easier than the one that you did. (A true statement does not automatically guarantee a true converse. They both require independent proofs.) But enough of that! Please forgive me for the math lesson. But I really enjoyed it!!! ;-)

    • @txtoolcrib
      @txtoolcrib  3 роки тому +4

      Thank you sir. I'm actually a bit out of practice. I kind of kick myself sometimes for as often as I have to look up old formulas again. One that I have to look up all the time, because I don't do it enough, is cone volumes. I have always loved math, especially geometry. It is the universal language.

  • @Downhaven
    @Downhaven 3 роки тому +9

    I love these videos Ben.
    But after you teach them they're generally so simple that I'm ashamed of the ignorance beforehand.
    As always, thank you for sharing. You're an incredible teacher and I am grateful you continue to do so.

    • @txtoolcrib
      @txtoolcrib  3 роки тому +1

      I generally find, that most things are quite simple if you have the right teacher.

  • @willb3018
    @willb3018 3 роки тому +3

    You brought back a lot memories....and offered a lot of useful tips today.. Geometry was the only math class I ever actually liked and at least for me, beyond the basic add/subtract/multiply/divide, the most useful.

  • @iamarawn
    @iamarawn 3 роки тому +1

    This is amazing. I learned something new today. I always used rulers to find it by keeping the edge fixed and moving the inner one. This is way easier

  • @knifetex
    @knifetex 3 роки тому +3

    Yes sir! Done many a shade tree fab job laying out like that. That geometry lesson at the end took me back 30 years to HS!

    • @txtoolcrib
      @txtoolcrib  3 роки тому

      I hear ya. Simpler times back then.

  • @michellemartin4253
    @michellemartin4253 Рік тому

    I loved that you added the math at the end. I was working on a quick project, but stuck around to learn more about it. Thank you!

  • @johnmatchett3548
    @johnmatchett3548 4 місяці тому

    Brilliantly simple. I've tried a few of these techniques for finding a circle centre and this is probably the best. The beauty is that any piece of A4/letter paper with a square cut edge works: you don't even need a proper 'square'.
    JM

  • @moorwaldent4233
    @moorwaldent4233 Рік тому +1

    Smart clips!!! I just learned a lot here. Thank you very much!

  • @craigmooring2091
    @craigmooring2091 3 роки тому +5

    Now, if you only have a ruled straight-edge, you can draw any 2 chords* and mark the midpoint of each. From each end of one chord draw an arc with the same radius ( greater than 1/2 of the chord, but the longer the better) so that the arcs intersect inside the circle. Connect the midpoint of the chord to the arc intersection with a straight line and extend that line if necessary to be clearly closer to the opposite side of the circle. Repeat with the other chord. Those two lines intersect at the center of the circle and each of them is perpendicular to their chord as well as coinciding with a diameter of the circle.
    *A chord is a straight line segment whose ends are also on the circumference of a circle.

    • @txtoolcrib
      @txtoolcrib  3 роки тому +4

      It is probably the most accurate method. But it is not the most practical on a circle that has already been cut out. Consider that most of the time on a construction site, you will find a slew of squares, but not a lot of compasses.

  • @thepeel
    @thepeel Рік тому +3

    Nobody’s going to mention how good that freehand circle was?

  • @rottnlove
    @rottnlove Місяць тому +1

    This will always be the easiest method to find the center of a circle. No measuring and anything that has a sharp pointed corner like sheet of paper or a book can be used

  • @F1fan007
    @F1fan007 2 роки тому

    I do templates as part of my job and love these videos. Big time savers!

  • @mingshey
    @mingshey 3 роки тому

    Great instruction video. If anybody objects you just turn the disk about the marked point on a lathe and scrape off the circumference.

    • @txtoolcrib
      @txtoolcrib  3 роки тому

      Thank you sir. For welding applications, this method works quite well. Now if you are machining, that is a different story.

  • @elkanahgray9810
    @elkanahgray9810 Рік тому

    Another method: draw a line segment having two point (point c1 and point c2) anywhere on the circumference of the circle. then draw a perpendicular line with three points: points d1 and d2 on the circumference, and point d3 being the midpoint of line segment c1 to c2. Therefore, the center of the circle is the midpoint of line segment d1 to d2. Why: because line segment c1 to c2 is parallel with a tangent line of the circle, and all tangent lines are perpendicular to the diameter of the circle

  • @RockSleeper
    @RockSleeper 3 роки тому

    you could just measure the mid-point of the hypotenuse of the first triangle. or you could just draw a line anywhere on the circle through 2 points of the edge of the circle. Then find the midpoint of that line, use the square to make a perpendicular line from the that midpoint, through 2 points of the circle, that gives you the diameter, then find the midpoint of that line for the center of the circle.

  • @arzelaascoli9189
    @arzelaascoli9189 3 роки тому +1

    Is it not the converse that you need to show (that is, you have to show that if you inscribe a right triangle in a circle, its hypotenuse is a diameter: you showed if one side of an inscribed triangle is a diameter, it is a right triangle)?

  • @kooper1683
    @kooper1683 10 місяців тому

    There are many other ways but this method is almost unique to metal workers as it is the way to find centre with a 90° rule.

  • @johnnyrevere7124
    @johnnyrevere7124 3 роки тому

    More great helpful tips..thanks TOOL Crib you a good fella

  • @edwardmccarthy7665
    @edwardmccarthy7665 4 місяці тому

    Excellent!

  • @traineralpaca6344
    @traineralpaca6344 Рік тому

    Best one Ive seen

  • @stephenfloodphoto
    @stephenfloodphoto 3 роки тому

    Really enjoying your content...if you don't mind sharing, what is your background and/or what do you do for a living?

    • @txtoolcrib
      @txtoolcrib  3 роки тому +2

      I am a millwright/welder. I work in commercial construction. I have owned my own business for 18 years now. Generally I work on installation of equipment for the feed mill industry, as well as commercial paint and blast booth installations

    • @txtoolcrib
      @txtoolcrib  3 роки тому +1

      I have a couple of different videos that highlight the type of work that I do.

    • @stephenfloodphoto
      @stephenfloodphoto 3 роки тому

      @@txtoolcrib Millwright = the Macgyver of the construction world. My father and I are civil engineers. We both have best buds who are welders. I've also been welding for 3 years now and really enjoy it. Tinkering and building stuff is life!

    • @txtoolcrib
      @txtoolcrib  3 роки тому +1

      I have always enjoyed repairing and/or designing something in my head, then make it come to fruition by actually constructing it. In a nutshell, that is pretty much what millwrights do. I had considered pursuing an engineering degree when I was young, but it’s just not me. I don’t have the patience required to deal with office politics. Instead of being the guy, I like being the guy the guy counts on to make sure it’s done right.

  • @randycortez5738
    @randycortez5738 4 місяці тому

    What pen are you using? Thanks

  • @Must_not_say_that
    @Must_not_say_that Рік тому

    Why not just use dividers? Set them at the maximum width of the circle and there yoiu have the diameter. Simply halve.

  • @ryanskeete
    @ryanskeete 10 місяців тому

    GOAT!!

  • @Ayrton4everrr
    @Ayrton4everrr 3 роки тому

    Great stuff. Thankyou

    • @txtoolcrib
      @txtoolcrib  3 роки тому +1

      Absolutely, always appreciate you taking the time to watch.

    • @Ayrton4everrr
      @Ayrton4everrr 3 роки тому

      @@txtoolcrib always my friend 👍

  • @JohnDoe-rx3vn
    @JohnDoe-rx3vn 2 роки тому

    Easier than heron's formula plus abc/4*(area of triangle)

  • @fireworxz
    @fireworxz Рік тому

    Thanks

  • @davidfalconer8913
    @davidfalconer8913 7 місяців тому

    Brilliant ! ... but ... NOT much use for finding the EXACT centre of small rods ( ¼ inch diameter ) , for this we might use a ( selected ) suitable small fixing washer placed over the end and extrapolate ( interpolate ? ) , no geometry required , and , yes it works ! .... ( tried - n - tested ) ... DAVE™🛑

  • @chrisfyfe9212
    @chrisfyfe9212 3 роки тому

    Vin , can you please re send your email , I’ve trying to contact you Via my “ smart phone “ re the Sideclip , I’ll try again Via my IPad . Thanks !

  • @benx104
    @benx104 7 місяців тому

    If it takes 6 minutes to find the center of a circle, then it's already too complicated for most.

    • @txtoolcrib
      @txtoolcrib  7 місяців тому

      Video might be 6 minutes, but it takes about 30 seconds.

  • @Allegedly2right
    @Allegedly2right Рік тому

    Trick photography Fake News it can’t be that simple

  • @DirtyDickMurdoc
    @DirtyDickMurdoc 2 роки тому

    Clear as mud