You didn't really explain what the upgrade was, as compared to what it comes stock with. Also if you have a link to the upgraded motors, that would help. but I had to watch it a couple of times to figure out what "Upgrades" you were talking about. Were there different ESC with this upgrade needed?
How did you handle the connection between the two esc’s going into the receiver? Simple Y cable? Did you disconnect any of the throttle cables going to the receiver? Thanks for your help.
Yeah, they fly so nice and look so cool with the swept wings. You should pull your ESC out update to a 130 or 160 amp and run an 8s battery that increases the performance so much. Do you still run 80mm engines if so I would encourage you to look at 90mm or higher. You could look at turning into a turbine jet as a friend did with his A10 80mm.
could you fit Schuyler 90mm's in the f-14? What would be all of the fastest possible components you could think of regardless of price for the edf f-14? I don't want turbine on foam but I will pay whatever it takes to max out the fw f-14 on edf
Cleanest landing I have seen with this aircraft
I set mine up with the 21,000kv and YGE opto 135 HV ESC's and the speed is crazy!!!
Heck yeah man sweet! She flies amazing! Especially now!
Sure does!
Thank you 🙏..
Great video and information; thanks!
Great flight ! Landing was sweet !!
thanks!
You didn't really explain what the upgrade was, as compared to what it comes stock with. Also if you have a link to the upgraded motors, that would help. but I had to watch it a couple of times to figure out what "Upgrades" you were talking about. Were there different ESC with this upgrade needed?
I heard 2100kv upgrade, But nothing about which manufacturer Or what type of ESC Upgrade you did.
Are these models available in Australia? Do we have a dealer?
How did you handle the connection between the two esc’s going into the receiver? Simple Y cable? Did you disconnect any of the throttle cables going to the receiver?
Thanks for your help.
Are you from Minnesota? If so, what air field are you flying at? It looks a lot nicer than the Brooklyn Park one.
Des Moines Modelaires
Awesome
Yeah, they fly so nice and look so cool with the swept wings. You should pull your ESC out update to a 130 or 160 amp and run an 8s battery that increases the performance so much. Do you still run 80mm engines if so I would encourage you to look at 90mm or higher. You could look at turning into a turbine jet as a friend did with his A10 80mm.
8s and turbines aren’t needed, it’s got near unlimited vertical! 80mm fans are still in the plane!!
could you fit Schuyler 90mm's in the f-14? What would be all of the fastest possible components you could think of regardless of price for the edf f-14? I don't want turbine on foam but I will pay whatever it takes to max out the fw f-14 on edf
80mm are the only one that will fit
No links to the motor and esc setup ?
www.horizonhobby.com/product/avian-100amp-brushless-smart-esc-3-6s-ver.-a/SPMXAE1100A.html
www.horizonhobby.com/product/motor-3280-2100kv-brushless-inrunner/SPMXAM1500.html
How many pounds of thrust do you reckon this set up produces?
Saw it fly and was very impressive... What fans and motors did you upgrade to?
2100kv 80mm Units!
@@zanelathrum Out of what Motion Plane please......
@@miketope5728 They are power systems out of an E-Flite F16 80mm.
exactly what motors did you upgrade to?
Spektrum 2100kv motors with Avian 100amp esc’s!!!
What radio setup did you used?
I have an iX12 running with a ar636a I believe
@@zanelathrum do you have the file for the transmitter? I hace the same ix12
I do not :/
Links????????
www.horizonhobby.com/product/motor-3280-2100kv-brushless-inrunner/SPMXAM1500.html
www.horizonhobby.com/product/avian-100amp-brushless-smart-esc-3-6s-ver.-a/SPMXAE1100A.html