At 30:53 as John and Ike come to an immediate stop mid course both point at the tire and laugh even harder😂👏 Charles in the background say “what happened what happened”😂😂😂
This episode has the best comeradaty between you 3. I mean that xart lasted 1 day. But your friendship survived. As did my admiration to the great new dad Mr C..
@@dodgeme1986truck While I don't necessarily disagree because builds are cool, there's no way a 150cc engine will make as much power as a 600cc with any sort of reasonable budget.
@@jameshealy4594 you'd be surprised I have a qmb 139 (gy6-50cc) that pushes about 45hp and 50 ft lbs. At the crankshaft that was built to that point for under $1500 total including fuel injection
@@dodgeme1986truck Mate I'm not trying to rain on your parade but that's more power than 250cc motorcross bikes, is it possible you're estimating a touch high? Also even if you're exactly on the money, four times the cubes is going to make a bunch more torque and one or two mods would take it to a point no 150cc engine is ever going to hit.
@@jameshealy4594 my hp and torque numbers are rounded down that engine was on a small engine dyno when I got those numbers and rounded down for weather and wear conditions as that engine now has over 12000 miles since the build
Love seeing 150 gy6 content finally being made here. That's definitely an automatic choke. Otherwise there's usually a cable that runs underneath the driver seat with a little spring loaded plunger. Been working on a few of those that a friend owned, they're excellent machines
Technically it's an enrichment circuit it allows more fuel on cold start and receives voltage from the regulator to close the circuit off as the engine gets warm
you should put tires around those post because you know someone someday will hit one of them and they are more forgiving with a rubber cushion around them . Play safe Boys !
You guys keep this Old Man from Washington NC laughing 🤣. I see in the near future an engine upgrade 😊. No way y'all be satisfied with wide open and no brake. We are all waiting. Love you guys. 🛵🧔💝💝💝
A Ike it's called a fuel enrichment enhancer During 1st start up start up voltage is applied to that as it warms up it loses continuity and shuts it off It allows more fuel to enter enter in to the intake just like Spraying starting fluid but it sprays gasoline into the engine so it starts up quicker
That looks easy to make AMAZING. Like one of your best karts amazing. Anybody else feel the atmosphere in the last couple of videos has just been that extra bit good?
Just finished getting my boss's kids' KPX 150 going, very similar setup. Did a full rewire, led lights, fuel pump & and a good deal of adjustment and tuning. Thing was a blast! My kids were sad to see it go back, they were the resident test drivers😅
That's the same frame Red Beard's daughter drives. Hilarious ending to the episode. We have had the hub rip out of a rim before, but not nearly as epic as yours.
I’ve owned one of these 150 size carts for a long time, the best upgrade you do to them is two stock yahama blaster shocks on the rear swing arm and bombardier 650 shocks on the front a arms. It’ll handle like it’s on rails after that. Would love to see y’all stuff a predator 670 on the back too!
Thats definitely got alot of potential , perfect starting point "I beg you to go all out and make a monster " would be perfect addition to the collection 👊👊👊👊
Hoo Hoo 😂 John cracked me up on the C&C lap. Issac's laugh when the tire rolls by him made me pee a little. 😂 Charles runs up like a concerned dad. This episode was the best yet. So much comedy. You three are awesome together! lol.
@@midnightwaterdragon4725 it would be awesome it is already setup like the original engine only difference is the silverwing has the transmission connected to the wheel hub instead of running a chain but I bet it would be pretty simple to setup to run a chain
Nowadays, this exact frame and engine is rebranded by either Kandi or Massimo and called the GKM200. Ive been looking at getting one for over a year, but haven't pulled the trigger yet. They're currently going for $3000+ online. The people who own them swear by them, so I might get one this year.
Easily one of my top 5 favorite Cars and Cameras videos. I love Isaac's death grip on the Holy Sh!t bar. That is an awesome cart, I hope to see more of it. Edit: I love the sped up lap footage more than I should to, lol.
"Underpowered" machines like that can be so much more fun than an over-powered kart that you're on the verge of crashing everywhere. They also teach you a lot about actually driving, because you have to maximise every bit of of track times as a mistake on one point can cost you for the next two or three corners as you can't get back up to speed so easily.
The part where Charles and John were driving with the cement on hyper-speed cracked me up - almost as much as the look on Ike's face when he was riding with John...at least before the wheel went AWOL.
My little brother had one of these but it had 2 forward gears if you push the lever forward again. It was pretty fun! This video reminded me of good times!
yes!!! I love GY6 videos. I have a couple of Tomberlin Crossfire 150s that are great for ripping. Video idea. No one has done this yet. Turn one of these electric. I would love to see a 40mph/40miles of range electric build on an off-road go kart/mini buggy build.
These GY6 powered karts are rad with a little bit of love and upgrades. I got a couple Baja Reaction 150s for my buddy and I and they're a complete blast
Great work getting it home. I’ve done the lean of shame for about 10 miles getting a snowmobile home with one ski. A friend on a different sled that lost one 30 miles out left it to get tools.
Yes, we caught the A.J. "'75 Johnson, electric choke" reference. I believe the solenoid actuates a rubber-tipped plunger which "chokes" main jet to prevent backfire at startup. Fun toy. I'm jealous...
You ever read,"The Mouse and the Motorcycle",by Beverly Cleary?That's what Charles',and John's 'speed run'made me think of and Laughed so dang hard...Thanks guys.The cart is a Winner !!The tire still made it further though...
I think it would be a great idea to put up a Guard-Rail on the right side (if you were looking at the start line) before that 4x4 post, so when you're coming in hot to finish and you aren't in the middle of the track, you don't head-on that 4x4 post if you slide to the left coming into the finish line. Thinking out loud :)
2:50 I can tell you straight up. These things carry a lot. I have a 2012 Kandi Spyder 150, only buggies better than the spyder are the Hammerhead Twisters. But the Spyder weighs 709 pounds with a max capacity of 750 pounds, so at roughly 563 a reasonable expectation would be a 600 pound weight capacity.
I miss the off road course you would do at your dad's house. The dirt mounds and the lower river crossing! I love the speed course runs, but it's great for the slower projects.
So this was the best episode of the season by far... Its good to know that Ike does not weigh 180Lbs as he has said on the show for years🤣😂. Keep doing what you do guys. Thanks for sharing!
I'm married and have three kids now. I am to a point now where if it has one seat, it's about worthless to me. I even put a passenger seat in my drag car and am in the process of putting it back on the street. "It's more fun with friends!"
So we just had a chance to run around in the rain and mud on a hammerhead 150. Pretty much the same as that thing. It was so much fun. Same sort of deal just floor it and let er rip. Sometimes going fast on something slow is better than holding back on something fast.
Hahaha! "We're gonna die!" Good vid guys! Best part of finding the weak point is you can make it stronger. Funny vid thanks for the upload. I never thought I'd enjoy a slow kart vid this much.
I love that cart! Can't wait to see the engine running at full potential without a governor. And thanks for wearing gloves so we can see more videos with hands.
I used to work at a Brick plant and we would take the dirt dobber nest and fire them in the kiln. The different clay they made the nest out of would turn out pretty cool with different colors.
This video is by far the best one you’ve recorded yet. Hilarious I love your videos guys keep up the hard work. I actually had this happen to me on one of the go carts I previously owned but got rid of it was actually pretty scary but yet pretty funny now I can laugh at. Now I have a SR 125cc pit bike that tops out at 51mph
My uncal has one of those just like that has a full transmission, and reverse and had the little rack above the motor. It would do about 65 mph. I think k he has like somewhere around 150 go cart. He also has one of the the full aluminum with the gas tank on the side it's all aluminum the frame everything. And you just about lay down on it. Off set motor. It's crazy cool and fast
You were workin on driving the wheels off!!! Ya got one! 😆 Yall need a good exhaust evac system, to hook up to whatever you're working on. Don't get lung cancer like me. Wider stance in front, than back, is a famously simple way to get agile handling in turns.
Who remembers the King Of The Hill episode where Bobby had to look after a bag of flower like a baby for part of a parenting class. The cement bag with the seatbelt just reminded me.
I have a helix 150cc buggy and I added a 40 series torque converter on a 420cc engine. it can do doughnuts and can drift lol. its a lot like the one in this video. btw thanks for the content!
Also I would check behind the CBT variator, they generally have a plate that will restrict the CBT variator from extending all the way. That should allow you to get more from the engine as well as getting variator weights and an upgraded variator and clutch, carburetor, and obviously gear ratio.
Pro tip, take a q-tip with some valve polishing compound on a drill and polish the needle seat. Thatll fix any sealing problem unless the rubber tip on the float needle is hard then that goes in the bin lol
29:39 "I'm just gonna do one lap and call it a day" *famous last words*
The tire flying off killed me 🤣
what a cool lil' SXS!
28:14 "It's in my mouth, it's in my mouth, eww" I'm not even joking, he says it in squeaky voice.
I think you guys need to do more of the fast voices that shit was hilarious. Keep up the good work boys
The simultaneous pointing at the lost wheel brought it all together
I lost my S$#t laughing when that happened man to funny
I laughed so hard
This was the first thing I thought! Well said Sir!! 🤣🤣😉😏
@@FJB8885 ok koo) 0p0pp09ooo ll0pp0ooo oi o oi ho l UC
At 30:53 as John and Ike come to an immediate stop mid course both point at the tire and laugh even harder😂👏 Charles in the background say “what happened what happened”😂😂😂
This episode has the best comeradaty between you 3. I mean that xart lasted 1 day. But your friendship survived. As did my admiration to the great new dad Mr C..
John’s 5X lap at 28:50 his “hoo hoo” sound that came out of him was so so funny it made my day😂 Thanks boys!
🤣 Toad from Mario Kart!
Absolutely loving this one. Please do the the 600cc scooter swap!! And probably upgrade that axle first haha.
Why when you can keep the 150cc block with reverse and build it up to produce just as much power because reverse is awesome
@@dodgeme1986truck While I don't necessarily disagree because builds are cool, there's no way a 150cc engine will make as much power as a 600cc with any sort of reasonable budget.
@@jameshealy4594 you'd be surprised I have a qmb 139 (gy6-50cc) that pushes about 45hp and 50 ft lbs. At the crankshaft that was built to that point for under $1500 total including fuel injection
@@dodgeme1986truck Mate I'm not trying to rain on your parade but that's more power than 250cc motorcross bikes, is it possible you're estimating a touch high? Also even if you're exactly on the money, four times the cubes is going to make a bunch more torque and one or two mods would take it to a point no 150cc engine is ever going to hit.
@@jameshealy4594 my hp and torque numbers are rounded down that engine was on a small engine dyno when I got those numbers and rounded down for weather and wear conditions as that engine now has over 12000 miles since the build
That was a fun video. Everyone seemed to be so much happier on this run. Thanks for sharing.
Love seeing 150 gy6 content finally being made here. That's definitely an automatic choke. Otherwise there's usually a cable that runs underneath the driver seat with a little spring loaded plunger. Been working on a few of those that a friend owned, they're excellent machines
Technically it's an enrichment circuit it allows more fuel on cold start and receives voltage from the regulator to close the circuit off as the engine gets warm
That cart looks like a ton of fun for you guys! Remember, it's not been broke in until you run a wheel off of it!
It's not broke in until it's broken
you should put tires around those post because you know someone someday will hit one of them and they are more forgiving with a rubber cushion around them . Play safe Boys !
Smart!
You guys keep this Old Man from Washington NC laughing 🤣. I see in the near future an engine upgrade 😊. No way y'all be satisfied with wide open and no brake. We are all waiting. Love you guys. 🛵🧔💝💝💝
i'd like to see a smaller crf125 with more horsepower and six forward speeds ... how fun would that be in that cart
Love to to see a series where you upgrade this cart in stages showing how to upgrade on a budget
A Ike it's called a fuel enrichment enhancer During 1st start up start up voltage is applied to that as it warms up it loses continuity and shuts it off It allows more fuel to enter enter in to the intake just like Spraying starting fluid but it sprays gasoline into the engine so it starts up quicker
That looks easy to make AMAZING. Like one of your best karts amazing. Anybody else feel the atmosphere in the last couple of videos has just been that extra bit good?
Just finished getting my boss's kids' KPX 150 going, very similar setup. Did a full rewire, led lights, fuel pump & and a good deal of adjustment and tuning. Thing was a blast! My kids were sad to see it go back, they were the resident test drivers😅
Your guys's General response at the same time was priceless
Love the content. Awesome to be able to watch the progress of the channel over the years. And Charles is a great addition.
Before you stick a 600 on it I love to see a full rebuild on the gy06 with a cam and a big bore kit on it great video as usual
That's the same frame Red Beard's daughter drives. Hilarious ending to the episode. We have had the hub rip out of a rim before, but not nearly as epic as yours.
So far the best video yet. was priceless to see the tire passing you guys along with your reactions couldn’t stop laughing
I genuinely had tears in my eyes when you both pointed at the "run away" broken wheel and said Arrrh lol.. so funny.
That’s a kandi cyclone raider 150cc go kart. Used to have one as a kid. Swapped the engine with a cb450sc nighthawk motor. Thing ripped!!
I’ve owned one of these 150 size carts for a long time, the best upgrade you do to them is two stock yahama blaster shocks on the rear swing arm and bombardier 650 shocks on the front a arms. It’ll handle like it’s on rails after that.
Would love to see y’all stuff a predator 670 on the back too!
I love how much you guys smiled and laughed on this one! Thanks guys!!!!!
John and Charles, the only two nuts to talk to a bag of cement on a hot lap! 🔥 🤣
Thats definitely got alot of potential , perfect starting point "I beg you to go all out and make a monster " would be perfect addition to the collection 👊👊👊👊
I agree keep it as original as possible. Lights would also be an awesome addition for night-time riding. It already has everything else.
The double point at the tire was awesome 👍
Ya know you don’t have to 100 mph to have fun. Just a motor and your friends ,nice Job .
The wheel coming o off and your reaction was priceless 🤣🤣🤣👌🏼👌🏼👌🏼
I have always wanted one of these and now my favorite UA-cam channel has one!👍
I love the fact that they hung the dragster like this is you were watching when they were building it
75 Johnson, with an electric choke. Love the Alan Jackson line, Charles. One of my favorite songs. DRIVE!
Hoo Hoo 😂 John cracked me up on the C&C lap. Issac's laugh when the tire rolls by him made me pee a little. 😂 Charles runs up like a concerned dad. This episode was the best yet. So much comedy. You three are awesome together! lol.
I love you guys reviving these old carts. The speed is just right for small children.
lovin' it! i think y'all should put a wide rear axle on it, might handle even better
ANNDDDD a bigger shift engine they sell those Chinese 200 CC ones oh wait crap yea they are Go Power Sports s pondered …
A engine swap with that big wrecked moped onto that frame would be awesome
Not a bad idea! The Honda silverwing 600 yessss
@@midnightwaterdragon4725 it would be awesome it is already setup like the original engine only difference is the silverwing has the transmission connected to the wheel hub instead of running a chain but I bet it would be pretty simple to setup to run a chain
Nowadays, this exact frame and engine is rebranded by either Kandi or Massimo and called the GKM200. Ive been looking at getting one for over a year, but haven't pulled the trigger yet. They're currently going for $3000+ online. The people who own them swear by them, so I might get one this year.
I got the colemen bk200 look the same it's alright not as fast as my old go kart but I feel it's unflippable but idk if it's worth it
NICE FIND! The performance aftermarket marketplace is FULL of GY6 engine and clutch/ drivetrain upgrade parts and how to articles.
Easily one of my top 5 favorite Cars and Cameras videos. I love Isaac's death grip on the Holy Sh!t bar. That is an awesome cart, I hope to see more of it.
Edit: I love the sped up lap footage more than I should to, lol.
Just the point and the laugh when u guys sore the tyre laying amongst the trees was gold love the content boys
Engine & sprocket change, then... rear wheels swap! This could be one of the best dirt karts you have?
"Underpowered" machines like that can be so much more fun than an over-powered kart that you're on the verge of crashing everywhere.
They also teach you a lot about actually driving, because you have to maximise every bit of of track times as a mistake on one point can cost you for the next two or three corners as you can't get back up to speed so easily.
The part where Charles and John were driving with the cement on hyper-speed cracked me up - almost as much as the look on Ike's face when he was riding with John...at least before the wheel went AWOL.
My little brother had one of these but it had 2 forward gears if you push the lever forward again. It was pretty fun! This video reminded me of good times!
yes!!! I love GY6 videos. I have a couple of Tomberlin Crossfire 150s that are great for ripping.
Video idea. No one has done this yet. Turn one of these electric. I would love to see a 40mph/40miles of range electric build on an off-road go kart/mini buggy build.
ua-cam.com/video/1FD96dL96G4/v-deo.html
These GY6 powered karts are rad with a little bit of love and upgrades. I got a couple Baja Reaction 150s for my buddy and I and they're a complete blast
That thing looks fun and cool as all get out. Looking forward to all the mods and tweaks!
Great work getting it home. I’ve done the lean of shame for about 10 miles getting a snowmobile home with one ski. A friend on a different sled that lost one 30 miles out left it to get tools.
Both pointing at the tire made me laugh out loud and loop the video. Everything is funnier when you are with your best buddy 😂
The look on Charles' face when it first fired says it all. The initial hope and joy of hearing a new project first get going is priceless.
If someone watches this and doesn't laugh until they cry, they got to be dead. An absolute awesome episode. One of your best, if not the best.
I must be dead then
@@dodgeme1986truck
it's a ghost!!! writer lol
@@UKMitchy naw but maybe a zombie
The wheel coming off was Priceless..LOL..HAHA...You may need a new drive belt if it has one. LOL..Funny Video for sure ..
the half helmet and pit viper combo on Charles is awesome! all he needs now is a killer mullet
That moment when you both pointed at the wheel in unison was comedy gold! Couldnt script it!
That was crazy y'all! Funny as hell and i agree with john that it was better with him and ike then charles and his little one.
You guys laughing was the best ever loved todays video 👍👍 you guys are the best makes my day 👌
Yes, we caught the A.J. "'75 Johnson, electric choke" reference. I believe the solenoid actuates a rubber-tipped plunger which "chokes" main jet to prevent backfire at startup. Fun toy. I'm jealous...
You ever read,"The Mouse and the Motorcycle",by Beverly Cleary?That's what Charles',and John's 'speed run'made me think of and Laughed so dang hard...Thanks guys.The cart is a Winner !!The tire still made it further though...
I love the additions to the track. It gives the viewer a better perspective of the course.
A big bore kit would be such a great addition in power! Rolling wrench big bore kits seem of good quality
LOL. Old Smokey. Gonna rock it till the wheels fall off. Literally.
This was one of the funniest and best videos you three have ever done. Had me laughing and I love how all of you react together.
I definitely want to see an upgraded version of this go-kart in feature episodes👌💯💯💯
This thing has GOT to come back soon, it’s got a ton of potential!
Love you guys just rip these machines after you get them running. Solid work!
I think it would be a great idea to put up a Guard-Rail on the right side (if you were looking at the start line) before that 4x4 post, so when you're coming in hot to finish and you aren't in the middle of the track, you don't head-on that 4x4 post if you slide to the left coming into the finish line. Thinking out loud :)
Too good, I love when dudes from my generation can laugh and have that kinda fun
2:50 I can tell you straight up. These things carry a lot. I have a 2012 Kandi Spyder 150, only buggies better than the spyder are the Hammerhead Twisters. But the Spyder weighs 709 pounds with a max capacity of 750 pounds, so at roughly 563 a reasonable expectation would be a 600 pound weight capacity.
One of the funnest episodes of the year! Great dynamics!
This is for sure 1 of the funniest episodes yet! Love it so awesome so funny how you both pointed at same time! Priceless
I miss the off road course you would do at your dad's house. The dirt mounds and the lower river crossing! I love the speed course runs, but it's great for the slower projects.
Ok, when you guys cracked up laughing after the wheel came off in the beginning of the video, that made my day. Thanks for the chuckle! 😎
So this was the best episode of the season by far...
Its good to know that Ike does not weigh 180Lbs as he has said on the show for years🤣😂.
Keep doing what you do guys.
Thanks for sharing!
Three person kart takes the cake sorry never have I laughter so hard with these guys keep it up you guys
Haven't seen anything from you guys in QUITE a while and, hey! Over a million now! CONGRATS!! It'll be fine!!
I can't stop laughing over how it goes from complete chaos to dead silent when the wheel fell off 😂
All I could think the whole time.... "What engine are they going to put in that dog?"
May be a great project for a big scooter engine.
Reverse three wheel motion! That thing looks like a riot, looking forward to you guys upgrading it with some more power (and better axles/wheels!)
Glad everyone’s okay still a great laugh! Definitely haven’t seen a buggy like that before.
Looks like you got the track all sorted corner marker's and everything looks too much fun, all the best to you all
I'm married and have three kids now. I am to a point now where if it has one seat, it's about worthless to me. I even put a passenger seat in my drag car and am in the process of putting it back on the street. "It's more fun with friends!"
So we just had a chance to run around in the rain and mud on a hammerhead 150. Pretty much the same as that thing. It was so much fun. Same sort of deal just floor it and let er rip. Sometimes going fast on something slow is better than holding back on something fast.
You guys need to build a c&c wrecker out of a go kart or something 👍
Hahaha! "We're gonna die!" Good vid guys! Best part of finding the weak point is you can make it stronger. Funny vid thanks for the upload. I never thought I'd enjoy a slow kart vid this much.
got a similar kart. with the 150cc gy6. running 25x10-12s on the back upgraded from 22x11-10s mine tops out with me and the youngfella at 55kmph
I love that cart! Can't wait to see the engine running at full potential without a governor. And thanks for wearing gloves so we can see more videos with hands.
Make that thing faster!! I feel it's a good candidate,sure it could handle a lot more
I used to work at a Brick plant and we would take the dirt dobber nest and fire them in the kiln. The different clay they made the nest out of would turn out pretty cool with different colors.
That thing needs some long travel suspension and that 600, grind hard odyssey but two seat shifter cross cart style. That thing could be a jumper 👀👀
This video is by far the best one you’ve recorded yet. Hilarious I love your videos guys keep up the hard work. I actually had this happen to me on one of the go carts I previously owned but got rid of it was actually pretty scary but yet pretty funny now I can laugh at. Now I have a SR 125cc pit bike that tops out at 51mph
My uncal has one of those just like that has a full transmission, and reverse and had the little rack above the motor. It would do about 65 mph. I think k he has like somewhere around 150 go cart. He also has one of the the full aluminum with the gas tank on the side it's all aluminum the frame everything. And you just about lay down on it. Off set motor. It's crazy cool and fast
Ant & uncal 🤣🤣
#Hitydesign USA today
Gotta be one of my all time favorite C&C videos!
You were workin on driving the wheels off!!! Ya got one! 😆
Yall need a good exhaust evac system, to hook up to whatever you're working on. Don't get lung cancer like me.
Wider stance in front, than back, is a famously simple way to get agile handling in turns.
"There goes my alignment boys...." OMG, I was freaking crying.... lololol
Who remembers the King Of The Hill episode where Bobby had to look after a bag of flower like a baby for part of a parenting class.
The cement bag with the seatbelt just reminded me.
Hey guys, an interesting project might be an electric razor bike! Those things can go fast
I'm gonna run out and grab me some AG1 immediately, thanks CarsandCameras! 😉
I have a helix 150cc buggy and I added a 40 series torque converter on a 420cc engine. it can do doughnuts and can drift lol. its a lot like the one in this video. btw thanks for the content!
Also I would check behind the CBT variator, they generally have a plate that will restrict the CBT variator from extending all the way. That should allow you to get more from the engine as well as getting variator weights and an upgraded variator and clutch, carburetor, and obviously gear ratio.
Pro tip, take a q-tip with some valve polishing compound on a drill and polish the needle seat. Thatll fix any sealing problem unless the rubber tip on the float needle is hard then that goes in the bin lol
It was so funny when Charles and John went and you guys fast forward through it it was hysterical