Well that proves that even the best coatings are still going to get dirty. The beauty lies beneath the surface and that proves it’s ability to shed with a light wash process
Just applied my body 36 and I’m on my first week. 90miles round trip daily and I notice less dusting. I’m expecting similar results in a couple of weeks. Great vid!👍
BOOM!!!!! Thanks for the update Ant Dawg!!!! Great vidjya as always. Idaho pin stripes FTW 🙌 The new coating is very impressive! I need to pick some up for my vehicles.
I am thoroughly impressed with this coating and that is from someone who has never applied one before. I am looking forward to order the glass kit and testing it out this winter on the daily driver!
Good stuff. I used this yesterday on my new car & the shine looks almost like it's a show car with carnauba wax. I applied a 2nd coat & it shined a little more. Very happy, especially if it lasts 3 years or close.
I wish I had some pictures of my old ‘93 4Runner after some of my off road excursions. That Sequoia is not dirty, that would be equivalent to a few weeks of daily driving for me. It is a very nice looking truck, I’d love to have one! That coating certainly does pique my interest!
So far this coating has been extremely impressive to read about and see in action. I would really like to see some testing of the actual scratch resistance compared to another coating side by side. With a light on the paint.
I just applied this to my personal truck and it is nothing like in this video. Very disappointing. Have been applying coatings for years and this one is a big let down
Idk if I’m doing something wrong but I have installed this coating on two separate vehicles and each time I have it the 10-15 minutes before buff off and it was a pain to get off. Felt like it left a small amount of haze that reminded me of buffer trails when hit with the scangrip.
I think your more likely to see someone pop in and say, “any decent coating would have this effect” which might be somewhat true, but how long does it last is key.
Its not often that Anthony is at a loss for words. That for me sells the coating, tells me he's going to be putting this on his wife's wheels lol. Just wow, even with no pre spray or drying aid just awesome
As long as what you use is PH neutral and doesn't contain protection in it, you should see the best results. Although most of us prefer to rinseless wash our personal vehicles! The coating has chemical resistance built in so it can handle harsher cleaning chemicals, but for most washes you don't need more than ph neutral soap.
I wonder how hard the paint is. That is a huge factor if it would scratch, coating can always help harden surface but if it’s really soft I bet you it would scratch if someone wrote on it. I will be trying out diamond body 36 soon to test it myself.
Put some proper light on the panel and then let’s see it. Having that soft lighting will make any car look good. Even the nasty swirled up black cars. I bought a handful of these costing and am doing my own testing currently. What I have found so far is they are not super hard curing making them harder to scratch. So far it seems like these are just another coating like graphene, or any other new name buzzz word coating to come out. I personally don’t see how the diamond nano coating is out perform or are better than your typical ceramic coatings. My testing will continue and time will tell. Keep up the great videos just please use some proper light to see the paints actually condition. It’s boarder line miss leading information and getting close to some Ceramic Pro selling tactics essentially saying these new coatings will protect your paint from going bushwhacking off roading. Cmon man… only PPF will do that. No coating on the market does that.
My issue with this coating is that it’s so easy to scratch, I have micro straight line scratches that I’ve never seen before with other coated cars. Idk what I did wrong but this coating seemed to make the clear super soft and now it’s so easy to be micro scratched
Coating looks great but the body 36 should have been a 50ml not a 30ml, I know 30ml is enough to coat a car but you usually try to use the least amount of product per panel because you are scared to run out before getting the whole car with a 50ml two coats are possible. Once a 50ml is available of body36 I will purchase a bottle for sure.
@@Andresthebigkat I never thought about that, I’m not a pro I’ve coated 4 cars before and the 30 ml barely made it but I guess I used to much product per panel but a dropper makes sense in controlling my product usage will get some.
We need a one year update on this!
Well that proves that even the best coatings are still going to get dirty. The beauty lies beneath the surface and that proves it’s ability to shed with a light wash process
Hasn’t worked for me like this & ive installed it every way to sunday. Disappointing
What magic you do to make it work that good. Acts like 2 month old cheap wax on mine
Anthony, I fully agree with your statement regarding those TRD Pro factory wheels.
Just applied my body 36 and I’m on my first week. 90miles round trip daily and I notice less dusting. I’m expecting similar results in a couple of weeks. Great vid!👍
I used Diamond Wheels on two sets of wheels and it barely does anything.
If you have owned a coated car, you know that dirt affects the hydrophobic behavior. It seems to have no affect as this coating rejects soil so well.
I’m surprised he didn’t start crying during the rinse
BOOM!!!!! Thanks for the update Ant Dawg!!!! Great vidjya as always. Idaho pin stripes FTW 🙌 The new coating is very impressive! I need to pick some up for my vehicles.
I am thoroughly impressed with this coating and that is from someone who has never applied one before. I am looking forward to order the glass kit and testing it out this winter on the daily driver!
I put the glass coating on my car. Performed very well during the remnants of Hurricane Ian this past weekend.
This is nuts. Very excited to lay some down.
And hopefully you’ll try the coating soon too
@@GDavis49 🤣
What tire dressing did you use?! I can't believe how easily the tires cleaned up
I just installed this on my Shelby gt500 can’t wait to do a longevity test myself.. but I’m loving it so far
I don’t wanna see one comment about not washing a dirty vehicle 🚗🧼🏴☠️ DPT has been so impressive!
That was not a dirty vehicle Jaime
@@JR-gf3kh 😤
Good stuff. I used this yesterday on my new car & the shine looks almost like it's a show car with carnauba wax. I applied a 2nd coat & it shined a little more. Very happy, especially if it lasts 3 years or close.
I wish I had some pictures of my old ‘93 4Runner after some of my off road excursions. That Sequoia is not dirty, that would be equivalent to a few weeks of daily driving for me. It is a very nice looking truck, I’d love to have one! That coating certainly does pique my interest!
Take an inspection light to it!
So far this coating has been extremely impressive to read about and see in action. I would really like to see some testing of the actual scratch resistance compared to another coating side by side. With a light on the paint.
I'll be using Diamond ProTech Body 36 to coat a Tesla Model 3 in 2 weeks.. I can't wait to use it!
How did it go for you
Could you have gone with a rinseless wash? That dirt came off so easy!
Yes you totally could, but we always recommend a pre spray, with a pressure spray, or hose or pressure washer!
Sequioa? I barely knower
Insane
I just applied this to my personal truck and it is nothing like in this video. Very disappointing. Have been applying coatings for years and this one is a big let down
Do a Update on this car
Idk if I’m doing something wrong but I have installed this coating on two separate vehicles and each time I have it the 10-15 minutes before buff off and it was a pain to get off. Felt like it left a small amount of haze that reminded me of buffer trails when hit with the scangrip.
You're waiting too long for your conditions. You don't need to wait the full time, always do a test wipe or two to figure out your flash time limit.
That coating is Awesome. How many coats were put on it?
When's it coming to the U.K.
Any experience yet with how this coating works with beadmaker as a drying aid?
I can’t wait for someone, (who claims to have functioning eyes) to pop up in this comment section and tell us the Sequoia wasn’t “dirty” 😂
It’s gonna happen 😉😀
I think your more likely to see someone pop in and say, “any decent coating would have this effect” which might be somewhat true, but how long does it last is key.
What’s better the 30 mil be enough for a full size suburban
Do you have the glass and wheel coat available on the website?
Its not often that Anthony is at a loss for words. That for me sells the coating, tells me he's going to be putting this on his wife's wheels lol. Just wow, even with no pre spray or drying aid just awesome
man that is unavailable how much was removed with just the water
What pressure gun are you using?
Do they make a ceramic topper/drying aide? Would be nice to use something like that just to keep it up a little bit longer
Interestingly enough, it’s not a ceramic coating.
Can you layer Body36?
I just bought a new truck a few months ago and have thinking of trying the Body 36. Would a 30ml bottle do two coats on a full size truck?
What’s kind of pressure washer you’re using? Also the setup?
Kranzle 1322. They did a shop tour video sometime last year I think.
What off shelve brand soap can I use to wash the car when my car is diamond coated? Can get them in Walmarts, autozone etc?
As long as what you use is PH neutral and doesn't contain protection in it, you should see the best results. Although most of us prefer to rinseless wash our personal vehicles!
The coating has chemical resistance built in so it can handle harsher cleaning chemicals, but for most washes you don't need more than ph neutral soap.
I wonder how hard the paint is. That is a huge factor if it would scratch, coating can always help harden surface but if it’s really soft I bet you it would scratch if someone wrote on it. I will be trying out diamond body 36 soon to test it myself.
always knew AllDayAnthony was jacked 😉
The pressure washer nozzle is so close to the paint, i feel it would have cleaned a non coated car too 🤔
The pressure on our outside gun is actually quite low, about 800 psi. So he’s actually holding it just right!
You'll get similar results with a $20 bottle of Megs HCW. 2 coats.
30 mil coming cover a full suburban
Thanks
❤️❤️❤️
Put some proper light on the panel and then let’s see it. Having that soft lighting will make any car look good. Even the nasty swirled up black cars.
I bought a handful of these costing and am doing my own testing currently.
What I have found so far is they are not super hard curing making them harder to scratch.
So far it seems like these are just another coating like graphene, or any other new name buzzz word coating to come out.
I personally don’t see how the diamond nano coating is out perform or are better than your typical ceramic coatings.
My testing will continue and time will tell.
Keep up the great videos just please use some proper light to see the paints actually condition. It’s boarder line miss leading information and getting close to some Ceramic Pro selling tactics essentially saying these new coatings will protect your paint from going bushwhacking off roading. Cmon man… only PPF will do that.
No coating on the market does that.
My issue with this coating is that it’s so easy to scratch, I have micro straight line scratches that I’ve never seen before with other coated cars. Idk what I did wrong but this coating seemed to make the clear super soft and now it’s so easy to be micro scratched
Facts. I applied this stuff and I still think my CQtz ceramic is thicker.
I need to be alone… 🥵
100ml will cover a full surburban
Coating looks great but the body 36 should have been a 50ml not a 30ml, I know 30ml is enough to coat a car but you usually try to use the least amount of product per panel because you are scared to run out before getting the whole car with a 50ml two coats are possible. Once a 50ml is available of body36 I will purchase a bottle for sure.
I did two coats on this sequoia with 30ml
15ml per coat. Totally doable!
If your worried about product usage buy some Medicare medicine droppers to use for controlled product usage .
@@Andresthebigkat I never thought about that, I’m not a pro I’ve coated 4 cars before and the 30 ml barely made it but I guess I used to much product per panel but a dropper makes sense in controlling my product usage will get some.
2nd
1st
Hope you’re feeling better Dino
@@GDavis49 Thanks man,i feel much better. The bad thing is i can't do anything for 4 weeks. Can't lift more than 11lbs for 4 weeks 😑
@@DinoGrahovic Good to hear! Don’t rush back, let your body heal 👍
Insane