Well thanks to you sir I had the confidence to replace my exhaust from stock to full stainless steel sounds fantastic and saved me $$$ on labour. Please don't stop your videos they help people like my self massively 😎😎
Great video from across the pond! Another fab upside to changing the factory exhaust system is the the fact that aftermarket ones weigh a whole lot lighter over stock!!!
Stock jetting. MPG is about 65 on the highway. Brisk performance plugs are a nice addition. Runs great. Exhaust has somewhat the same impact as stock. It is from the UK where noise laws are very strict. I bought the Motad more for appearance and to be one-of-a-kind as I built this bike from a bare frame. I wanted the best parts on him.
adidasguy! I didn't know you had a youtube channel. I used to post on the gstwin forum... now I'm looking at getting another GS to replace the 01 that I (stupidly) sold!
The seat is by Gimbel in Germany. It comes primed fiberglass and you paint it to match your bike. They are on ebay as seller id bikeparts79. Go to their store and search in there for GS500 so see the parts they sell for the GS. The seat puts you an inch or two lower making it really nice if you are short like me.
They are R&G Racing frame sliders. You can get them for the "E" model and the "F"models as well (requires drilling hole in fairing but looks really great! Like a GSXR!)
Check all the bolts. Be sure the 2 bolts that hold the bracket to the can are tight. Insure the rear frame bolt is tight and extra tighten the clamp where the two parts join together under the engine. You might get vibration of your missed the rubber bumper for the center stand. Without that, the center stand can vibrate against it - metal to metal.
I have seen people drill holes in the end of a stock exhaust. While it makes it louder, it also makes it have a higher, tinnier sound - not deep and throaty. Others might have suggestions. Best I can suggest is get a used Jardine or V&H exhaust.
Love the video Patrick. Along with my Royal Enfield Bullet I have two GS500s, a naked 2005 K5 and a 2004 FK4. The fairing bike I built from individual parts. It has a 2007 engine in a 2004 frame. I'm thinking of ditching the standard exhaust in favour of an after market sports exhaust. Your motad looks great but here in the UK they're not cheap! All the best Ray.
hi, looking to replace my 2007 GS500F exhaust before selling as it is scratched. Probably going to go with with a wrecker / 2nd hand one that is in better condition. Will a GS500 or 500E fit? thanks.
the Oil Radiator is stock equipment on the 500f, since it had Fairings they added that radiator. you can find them and the extra bits prolly from a oem parts distibutor or ebay craiglist or any other such searches.
i got a 89 gs500e and i just want to replace the muffler or make it louder its stalk now is there any hints or tips you can give me to make it a quick job can the stalk muffler be tampered with to make it louder
Oh, the protective bands are R&G Racing muffler guards. A good way to protect your investment in a $400 muffler. Good for stock, too, in case the bike falls over.
There is no front or back for the gasket. Stock mufflers are all one piece. Most after market exhausts are 2 or 3 pieces to make them easier to ship and manufacture.
Engine bottom is different. Oil cooler doesn't do much. They've been running them for years without one. 2004+ naked bikes in Europe do not have oil coolers. Just the 2004+ "F" models. Even 1989-2000 models with the TCP or Five Stars fairing were fine with no oil cooler unless sittting in really hot weather. Then, the fairing prevents air from getting to an oil cooler anyway.
Yes they will. All GS500 exhausts fit the same because all engines are basically the same and the frames the same except for how the tail plastics mount.
Oil cooler not possible to add to older engines. Not really necessary, either. They were added in 2004 with the fully faired "F" model. Naked bikes 2004+ were still made without the oil cooler.
Hello hello please, I'd like to know where the catalyser is in order to know where to cut the exhaust to add a second muffler on the left. Can anybody help me on that one? Mine is a 2013 model.
It depends on the system you buy. No issues with Motad. As for Vance & Hines: 2 bikes with different vintages of it and one bike it is no issue and the other is so close but won't let you remove the filter without dropping the exhaust. On any system I've seen you can remove the drain, though oil may spill on the pipes so cover them with foil or plastic to keep them clean. Oil filter is the only issue on some systems. Sometimes you can get it out. Sometimes all it takes is loosening the headers 1/4" and loosening the rear bolt to let it move a little to gain enough clearance (so not always a complete removal).
Those are the OEM clip on bars. There was one style in 1989. These are the 1990-1996 style from Europe (not sold in the USA). If you are on gstwins, there is a thread with complete details and descriptions of the 3 types of OEM clip ons (1 sold world wide, 2 never sold in the USA)
I'm getting a little popping sound on deceleration with the newly installed (used) Yoshi exhaust. I did no modifications after installation. Is this ok? I like it.
Ah....so something else less similar to stock mught cause problems? I'm looking at an 07 with a Delkevic R6 can that the current owner added "because it was louder for safety" (eyeroll). If that's a frame-up, you're pretty proficient, because I just thought it was a stock bike that somebody took really good care of.
adidasguy! I didn't know you had a youtube channel. I used to post on the gstwin forum... now I'm looking at getting another GS to replace the 01 that I (stupidly) sold!
Well thanks to you sir I had the confidence to replace my exhaust from stock to full stainless steel sounds fantastic and saved me $$$ on labour. Please don't stop your videos they help people like my self massively 😎😎
This might be the cleanest gs500 on UA-cam lol, no scratches EVER
not at all lol!
Great video from across the pond!
Another fab upside to changing the factory exhaust system is the the fact that aftermarket ones weigh a whole lot lighter over stock!!!
Muffler scratches must have killed this guy's parents.
Addidasguy,
I love how thorough you are AND that you still manage to forget stuff (e.g. putting on your rubber gloves. Great video.
Great explanation video. The GS undoubtedly is one of the best value for money bikes. Love it.
Fantastic video! Love all the recommendations and warnings.
I do like the deeper sound, still can't get rid of that sewing machine though
Stock jetting. MPG is about 65 on the highway. Brisk performance plugs are a nice addition. Runs great. Exhaust has somewhat the same impact as stock. It is from the UK where noise laws are very strict. I bought the Motad more for appearance and to be one-of-a-kind as I built this bike from a bare frame. I wanted the best parts on him.
bike looks so cool with that seat
adidasguy! I didn't know you had a youtube channel. I used to post on the gstwin forum... now I'm looking at getting another GS to replace the 01 that I (stupidly) sold!
The seat is by Gimbel in Germany. It comes primed fiberglass and you paint it to match your bike. They are on ebay as seller id bikeparts79. Go to their store and search in there for GS500 so see the parts they sell for the GS. The seat puts you an inch or two lower making it really nice if you are short like me.
They are R&G Racing frame sliders. You can get them for the "E" model and the "F"models as well (requires drilling hole in fairing but looks really great! Like a GSXR!)
Check all the bolts. Be sure the 2 bolts that hold the bracket to the can are tight. Insure the rear frame bolt is tight and extra tighten the clamp where the two parts join together under the engine. You might get vibration of your missed the rubber bumper for the center stand. Without that, the center stand can vibrate against it - metal to metal.
Great video, which is the mirror you've got on the bike? I have a gs500 year 2004 that comes with terrible mirrors. These ones look good.
I have seen people drill holes in the end of a stock exhaust. While it makes it louder, it also makes it have a higher, tinnier sound - not deep and throaty. Others might have suggestions. Best I can suggest is get a used Jardine or V&H exhaust.
I know its a old video but what are he putting on hes bolts ? :D?
Well explained , including trouble shooting tips.
Which frame sliders do you have on that bike? they look nice.
Love the video Patrick. Along with my Royal Enfield Bullet I have two GS500s, a naked 2005 K5 and a 2004 FK4. The fairing bike I built from individual parts. It has a 2007 engine in a 2004 frame. I'm thinking of ditching the standard exhaust in favour of an after market sports exhaust. Your motad looks great but here in the UK they're not cheap! All the best Ray.
That is an amazing beautiful gs500e. I am riding a 94. Which year is that one?
hi, looking to replace my 2007 GS500F exhaust before selling as it is scratched. Probably going to go with with a wrecker / 2nd hand one that is in better condition. Will a GS500 or 500E fit?
thanks.
Hi bud,how did install this oil radiator? and where did you buy it please?
Just FYI, in case you are hoping for a reply, he passed away in an MVC
oh dear, sorry to see this :(
RIP
the Oil Radiator is stock equipment on the 500f, since it had Fairings they added that radiator.
you can find them and the extra bits prolly from a oem parts distibutor
or ebay craiglist or any other such searches.
RCD how do you know he died? i didnt know that
what's a prolly..?
i got a 89 gs500e and i just want to replace the muffler or make it louder its stalk now is there any hints or tips you can give me to make it a quick job can the stalk muffler be tampered with to make it louder
Oh, the protective bands are R&G Racing muffler guards. A good way to protect your investment in a $400 muffler. Good for stock, too, in case the bike falls over.
doe u remember where u got the add on signals on faring, I looked at led lights can u give me a part number. my bike is exactly like your...tks
Please please please let me know where to get that seat/cover
There is no front or back for the gasket.
Stock mufflers are all one piece. Most after market exhausts are 2 or 3 pieces to make them easier to ship and manufacture.
Has your power/MPG been affected or has it run roughly at all without rejetting?
(Unless it was already done)
Ayo know this video came out 10 years ago but what seat unit is that ive just got a gs500e and want that seat haha
It is by Motad in the UK.
The rear sets are by Gimbel in Germany.
Engine bottom is different. Oil cooler doesn't do much. They've been running them for years without one. 2004+ naked bikes in Europe do not have oil coolers. Just the 2004+ "F" models. Even 1989-2000 models with the TCP or Five Stars fairing were fine with no oil cooler unless sittting in really hot weather. Then, the fairing prevents air from getting to an oil cooler anyway.
Nice but where can I get a seat like that
Yes they will. All GS500 exhausts fit the same because all engines are basically the same and the frames the same except for how the tail plastics mount.
I think this guy just likes to hear himself talk LOL
Is it possible to get an 1994 gs 500 oil cooled with a cooler from the newer series?
Oil cooler not possible to add to older engines. Not really necessary, either. They were added in 2004 with the fully faired "F" model. Naked bikes 2004+ were still made without the oil cooler.
Great vid addy
What's the pipe called
Hello hello please, I'd like to know where the catalyser is in order to know where to cut the exhaust to add a second muffler on the left. Can anybody help me on that one? Mine is a 2013 model.
When you change the exhaust I'm pretty sure you need to change the jets in the carbs. How do you know which jets to change them to?
did u find out?
yeah. it was something easy.
I like this adidasguy. Is this his youtube channel?
quality video.
Will oil changes be more difficult with upgrade exhaust
It depends on the system you buy. No issues with Motad. As for Vance & Hines: 2 bikes with different vintages of it and one bike it is no issue and the other is so close but won't let you remove the filter without dropping the exhaust.
On any system I've seen you can remove the drain, though oil may spill on the pipes so cover them with foil or plastic to keep them clean.
Oil filter is the only issue on some systems.
Sometimes you can get it out. Sometimes all it takes is loosening the headers 1/4" and loosening the rear bolt to let it move a little to gain enough clearance (so not always a complete removal).
Thank you
I have a 99 gs500e, are those aftermarket handle bars, they look like clip-ons.
Those are the OEM clip on bars. There was one style in 1989. These are the 1990-1996 style from Europe (not sold in the USA). If you are on gstwins, there is a thread with complete details and descriptions of the 3 types of OEM clip ons (1 sold world wide, 2 never sold in the USA)
thanks man, appreciate the rapid response.
very helpful video !!!
Excelente tus vídeos.
Adidasguy! A familiar name from the GSTwins forum :D
Suzuki SV650 mirrors. They are much better than the black plastic stock GS500 mirrors.
I'm getting a little popping sound on deceleration with the newly installed (used) Yoshi exhaust. I did no modifications after installation. Is this ok? I like it.
Neil Bergenstein You need to rejet your carbs if you changed from stock exhaust to aftermarket.
Keep the popping.. it's awesome ;)
Ah....so something else less similar to stock mught cause problems? I'm looking at an 07 with a Delkevic R6 can that the current owner added "because it was louder for safety" (eyeroll).
If that's a frame-up, you're pretty proficient, because I just thought it was a stock bike that somebody took really good care of.
That´s not the original seat, isn't it?
I like the seat bro
Patrick passed away a few years back. He helped me a lot through the GS forum many years ago. He was a truly great guy.
26:36 Philips are the worst screwdrivers. Try JIS ones.
I'm not convinced you like it that much. lol. It's better than stock though.
Alright thanks for answering :D
as the front you get 3 out the other snaps! like see get all 4 out lol
You might post some questions on gstwins.com - that's the best GS500 site around.
Guten Tag, ich suche genau so eine Anlage. Können Sie mir helfen? Gruß
Suzuki SV-650 mirrors
Should of just got staintune Australia
16:18 what hahaha
It honestly doesn’t sound any different or better than the stock exhaust
adidasguy! I didn't know you had a youtube channel. I used to post on the gstwin forum... now I'm looking at getting another GS to replace the 01 that I (stupidly) sold!