Please do keep doing the reverse transformation segment. It’s really appreciated to see both versions of a transformation, since there’s often some difference between the two.
I'm really impressed with that jet mode. Usually jetformers have a really undesirably kibbly mess of an underside, but Skyquake has to have one of the cleanest jet modes I've ever seen.
@@Anderwreckzz the earth rise Screamer wasn't bad either. I got the coronation pack with the pauldrons, opening hands, throne, cape and crown, same figure just with accessories and it's nice and clean in both modes with pretty much no kibble.
This guy was made this faithful to the source material because of the huge backlash on Arcee and Bulkhead. And keep doing the reverse transformation, it is such a nice touch.
I don’t think so. This guy was not made in a few months. It takes longer to be able to engineer TF toys, so I’d say it was just a coincidence that he follows the source material better than Bulk or Arcee.
"So time has made you a coward, Prime!?" Also with what you said about if they keep giving us Transformers Prime characters, I would absolutely LOVE a TFP Legacy Shockwave.
This is just a sweet figure, will be happy to snatch him up! Love the mini gun he comes with, also the slight hint of Dreadwing in the form of the sword embedded within it!
Reversing transformation, in general, can be a really handy thing to refer to when you've got a new toy, or just dug out an old toy and literally forgotten what to do with it. :)
Those reverse transformations and doing it both ways are awesome and you can't imagine how much it really helps us out and we super appreciate it and all the hard work my friend
I'm a big fan of you showing both transformations. Great looking figure! I wasn't sure about him but after this I'm convinced. I need more shelves. Awesome review!!
My only complaint is his wings in robot mode being Starscream-stylized, instead of a sort of jetpack storage. But even then, he look absolutely FANTASTIC!
20:47. Find or make two thrusters for the two holes in middle of his wings and you have a jet-pack. Or his guns can double as them, just a few thoughts.
Yeah, I wish they could've worked some extra joints into the wings so they could point down for Skyquake and Dreadwing or up like they do now for the inevitable G1 Skyquake and MW Starscream repaints.
The face looks like Tarn and I can’t unsee it. His waist rotation looks a bit weird. But definitely the best looking prime universe figure and one I’m done for getting. Awesome review!
The combination with needlenose probably comes from one of the MANY possible reuses of the mold, as G1 Dreadwind and Needlenose as G1 Blackwing. There's also a pretty big list of other possible redecos: - Prime Dreadwing - Machine Wars Starscream - G1 Skyquake - G2 Dreadwing? (Needlenose as G2 Smokescreen?) - Zombie Skyquake - Cybertron Starscream? - Any other big jet transformer
Also the instructions which come with the figures aren’t all that straight forward, it’s great that TF collectors give us both transformations so we can figure them out!
Finally we actually get a good look at this. Thanks for taking the time to try to learn everything about the figures and pointing out all the articulation instead of rushing out reviews without mentioning most the features, like another reviewer. Even if you don’t review it first you definitely will have the most thorough of the early videos, and I appreciate that.
It’s more the fact that we found out that he was a twin in season 2 via Dreadwing, his whole relationship with his brother and seeing them together but ultimately not seeing it felt like a missed opportunity but still cool to get those two.
yep, this went from an "okay, thsi is cool but will probably get the Dreadwing repaint," to, "Yeah I want both." this thing is so, so cool, I love it, and I love he looks like a leader instead of a leader-priced voyager.
I am so Ready for this guy! Been a big fan of this underrated character who got way too little screentime. Might get any redecos too, this looks like one of the best leaders in years.
I really hope they create a G1 colourway of this guy, that figure along with Thunderclash are so nostalgic. Although I also do remember the dreaded gold plastic of the original!
While I would have preferred a 1 to 1 Prime design, this is definetly the much appreciated love letter that those first three horribly failed to deliver. Love both of his modes and... oh boi... he surely have a presence! He looks majestic! Also, I appreciate seeing the transformation in both ways, it can help fully understanding how to move the parts.
The video The figure The presentation The execution of this most remarkable ditty " again " is hella flawless!!! Look keep doing what your doing !!! The majority of the transformer action figure world will " continue" to salivate in what u present!!! Ty for your continued service " Salute " ( Pay attention none to the haters for they are simply mad that they r not you ) 😂
Looking at the figure I think Hasbro meant it for its G1 version but, as in the past, releases the redeco/retool first. But that doesn't change the fact that he's a great figure.
I'm fairly certain Skyquake went through a major redesign towards the end of development, and there are some clear artifacts left over from this. His elbows are mismatched, but they function identically. There's a pivoting mushroom joint near the landing gear that goes completely unused. The directions promote the idea of a solid object passing through another solid object. The back has a massive gap that sticks out behind his head. The tabs on the wings don't ever line up the way they need to. I believe that the original transformation had the canopy sliding into the cockpit space and the whole nose spinning around. This solved all of the issues I have with the figure. The ugly gap behind his head is nowhere to be seen. The wings tab into the back properly. The kicker? This concept makes the weight of the figure significantly more central and fills out his chest more, which would eliminate the need for heels, which he doesn't have. Furthermore, I believe that the redesign was done specifically to dump the accurate cockpit torso in favor of the g1 torso since the shaping of everything seems to suggest that the original plan was more screen-accurate. So Hasbro essentially gave us a worse figure because they wanted to jack themselves off to g1 some more like the last 5 years weren't enough already.
When the original dreadwing came out in g2, he came with a name dumped smokescreen(who was a jet). Hasbro is probably going to repaint needle nose into that smokescreen to combine with the inevitable dreadwing repaint.
I was EXTREMELY worried after seeing TFA Prowl, but this soothes me. This right here is a Generations figure. A figure that won’t clash with other designs.
I can't really afford to get multiple recolor of the same mold at the leader class price point, so I have to decide do I get this, Dreadwing, G1 version, Machine Wars Starscream, or King Atlas, or do I just give in an take out a loan to get them all
Holy shit he is much better then I anticipated. The posability really sold me, butterfly, waist swivel and ab crunch on a mainline figure?!?!? Im so happy!
Personally I prefer Dreadwing's color scheme (and longer inclusion in the show), but glad to see how great the figure is! Now just to wait for the repaint.
Just generally cool to get both him and Dreadwing again in a modern day TF line, plus they’ve one upped their R.I.D Prime voyagers back in the 2010’s which is cool!
-Legacy Evolution Skyquake from the Prime Universe looks amazing. Heavily maintaining his Prime show appearance, G1ified a little, and has hints of his Decepticon Predator toy looks. The sword and machine gun are cool. 8:38 Optimus Prime: It has been awhile Skyquake. Skyquake: Optimus Prime, I haven't seen you since the Battle of Technahar. Megatron ordered me to annihilate you. -Transformation to robot to jet and back again is very involved. 13:33 Skyquake: Air superiority achieved. -Jet mode looks as awesome has his robot mode. It's sharp and aerodynamic. -Looking forward to his blue repaint as his twin brother Dreadwing, and possibly a repaint as his Decepticon Predator figure. As the tabs and evo-fusion gimmick with Needlenose may be a hint, of what else is to come with this Skyquake mold.
Skyquake- What a figure the weapons, alt mode, and robot mode is just perfect just a big ole g1 and prime universe combination styled seeker 9.5 outta 10
This figure looks sick! I’m a Prime universe fan, and can’t wait to have this bot in my ranks. The reverse transformation segment is a keeper. Great review.
I have to be honest; for all I like the figure and the alt mode a lot, I think the combination with Needlenose just looks a bit goofy. It really just looks like "a plane sitting on top of another plane" and not really organic as a combination. I think Needlenose is too big for it. Would have quite liked to have seen some sort of Core Class figure with that sort of compatibility though; maybe some sort of variant of Prime Soundwave in Predator Drone alt mode would have looked sweet pegged on top?
Oh my gosh, Legacy Evolution Skyquake is so SUPERIOR! I love his Evo-Fusion gimmick with Needlenose, this gimmick does remind me to original Transformers toy, that's such a super sweet touch from Hasbro 😊. Despite Skyquake is die so quickly in Transformers Prime and become a zombie robot 🤖, however i still want to try to pick up this guy. Unlike Legacy Bulkhead, Arcee and Knock Out, this design is almost similar to original Transformers Prime toy Skyquake, that's super sweet touch for my opinion. For me Skyquake and Needlenose can become as great Decepticon partner attempt his Evo-Fusion gimmick, great video, PrimevsPrime 🤗.
Nice review. I have Skyquake on preorder and can't wait to get him. I like the Legacy Bulkhead and I think it was supposed to be a G1 version of Animated Bulkhead not Prime even though they said Prime on release probably bc of popularity. Xtransbots is making a MP version of Bulkhead that is taking queues from the Legacy one and it looks amazing with the G1 inspiration. We have APC if we want something closer to the original. I like that Hasbro is doing these G1 -esque versions and I hope one day we get a G1 style Prime and/or Cyberverse Bumblebee.
I'll just see this as Dreadwing and Skyquake's Cybertronian mode alt-mode before they scanned the jet mode. We did see Dreadwing's Cybertronian alt-mode in one episode where Wheeljack explained he had been chasing down Dreadwing after blowing up Seaspray (and tried to take Wheeljack with him).
Somehow I actually remember Skyquake more from his appearance in last stand of the wreckers. I guess it must be how integral he was to the story, his death at the very end of the book was quite shocking.
Please do keep doing the reverse transformation segment. It’s really appreciated to see both versions of a transformation, since there’s often some difference between the two.
Thanks very much for the feedback! I’ll try & implement it into future reviews :)
@@PrimeVsPrime please do! It definitely helps quite a bit!
@@PrimeVsPrime yes please!
Please include the reverse transformation in your future reviews. Very informative!
Absolutely keep doing the reverse transformation I broke one a year ago bc the car to robot was different from the robot to car
I'm really impressed with that jet mode. Usually jetformers have a really undesirably kibbly mess of an underside, but Skyquake has to have one of the cleanest jet modes I've ever seen.
The robot mode is pretty impressive too. For having most of a jet on his back, he doesn't look super kibbly or topheavy.
I agree with you guys!
(Kingdom Cyclonus has entered the chat)
@BunnyGuns they definitely had some opportunities to use that mould with rebooting to make some better seekers
@@Anderwreckzz the earth rise Screamer wasn't bad either. I got the coronation pack with the pauldrons, opening hands, throne, cape and crown, same figure just with accessories and it's nice and clean in both modes with pretty much no kibble.
This guy was made this faithful to the source material because of the huge backlash on Arcee and Bulkhead. And keep doing the reverse transformation, it is such a nice touch.
I am glad because Arcee wasn’t great in my opinion haha! & yes I’ll try too! Thanks for the feedback :)
It sucks because Bulkhead is a good out of context, but yes a poor homage to the original TFP design.
I don’t think so. This guy was not made in a few months. It takes longer to be able to engineer TF toys, so I’d say it was just a coincidence that he follows the source material better than Bulk or Arcee.
@@PrimeVsPrime "I wish it was larger and a little more substance, but it gets the job done" explain yourself
One of the most Underrated Decepticons throughout all of Transformers Prime but he's missing his Proximity Bombs.
He did die quickly.
His twin brother, Dreadwing, had those not Skyquake
He was so cool! But dreadwing was better 🤩
@@PrimeVsPrime maybe character wise, but the green always complimented this design better than blue imo
@@PrimeVsPrime and I also think that they learned there lesson about making everything g1 styled.
This figure looks absolutely MAGNUM OPUS in the Legacy line
Yes :D
@@cybermotion2007 see my drawing of bumblebee short
@@HelenaSan425 ;)
@@cybermotion2007 bruh it's out now... See it
Meh
"So time has made you a coward, Prime!?"
Also with what you said about if they keep giving us Transformers Prime characters, I would absolutely LOVE a TFP Legacy Shockwave.
That would be so awesome! We need more Shockwave figures too!
@@PrimeVsPrime I love Shockwave and my favorite iteration is the one from Transformers Prime
I would love a tfp legacy breakdown.
@Beck Hornig me too! I'm sure there's one on the way.
Yes just yes and maybe a legacy tfp optimus prime?
This is just a sweet figure, will be happy to snatch him up! Love the mini gun he comes with, also the slight hint of Dreadwing in the form of the sword embedded within it!
It’s really cool! Cannot wait for dreadwing repaint!
Reversing transformation, in general, can be a really handy thing to refer to when you've got a new toy, or just dug out an old toy and literally forgotten what to do with it. :)
Skyquake and predaking were always my favorite designs from prime, so cool that quake finally got the treatment he deserves
Those reverse transformations and doing it both ways are awesome and you can't imagine how much it really helps us out and we super appreciate it and all the hard work my friend
Posing him dismembering Junkions and Autobot Modulators is going to be fun.
I'm a big fan of you showing both transformations. Great looking figure! I wasn't sure about him but after this I'm convinced. I need more shelves. Awesome review!!
My only complaint is his wings in robot mode being Starscream-stylized, instead of a sort of jetpack storage.
But even then, he look absolutely FANTASTIC!
They were more compact on the G1 toy, but I’m pretty sure they were big on the Prime version.
20:47. Find or make two thrusters for the two holes in middle of his wings and you have a jet-pack. Or his guns can double as them, just a few thoughts.
Yeah, I wish they could've worked some extra joints into the wings so they could point down for Skyquake and Dreadwing or up like they do now for the inevitable G1 Skyquake and MW Starscream repaints.
The face looks like Tarn and I can’t unsee it. His waist rotation looks a bit weird. But definitely the best looking prime universe figure and one I’m done for getting. Awesome review!
The combination with needlenose probably comes from one of the MANY possible reuses of the mold, as G1 Dreadwind and Needlenose as G1 Blackwing. There's also a pretty big list of other possible redecos:
- Prime Dreadwing
- Machine Wars Starscream
- G1 Skyquake
- G2 Dreadwing? (Needlenose as G2 Smokescreen?)
- Zombie Skyquake
- Cybertron Starscream?
- Any other big jet transformer
- universe king atlas
- bb
- machine wars megaplex yeah those are more examples
I actually love the reverse transformation, sometimes getting the figure back into robot can have some weird catches, so I like it
Also the instructions which come with the figures aren’t all that straight forward, it’s great that TF collectors give us both transformations so we can figure them out!
I’m so happy to see TFP gets some love
Me too! & a nice faithful representation too!
Finally we actually get a good look at this. Thanks for taking the time to try to learn everything about the figures and pointing out all the articulation instead of rushing out reviews without mentioning most the features, like another reviewer. Even if you don’t review it first you definitely will have the most thorough of the early videos, and I appreciate that.
Keep them reverse transformations coming. its really helpful
I just received mine this morning. So far the best Legacy figure of the year.💯
It is very good! I’m glad you like it!
This is one of the best use of transforming joint as an actual articulation in recent years in my opinion. Good job as always!
I think the reverse transformation is REALLY helpful - I'm 100% behind you keeping it in the videos please :)
I love Prime vs Prime reviews because he doesn't waste a word or ramble. He has a purpose and sticks to it. Great review!
Man it brings me back good memories from Optibotimus when he does the reverse Transformation in his videos
I would just like to say your photography at the beginning of your vids is on point. I very much enjoy your action shots, keep it up!
I think the concept of SkyQuake intrigues people because he didn’t get much screen time in Prime. I hope he shows up in Earthspark.
It’s more the fact that we found out that he was a twin in season 2 via Dreadwing, his whole relationship with his brother and seeing them together but ultimately not seeing it felt like a missed opportunity but still cool to get those two.
yep, this went from an "okay, thsi is cool but will probably get the Dreadwing repaint," to, "Yeah I want both."
this thing is so, so cool, I love it, and I love he looks like a leader instead of a leader-priced voyager.
Loved the reverse transformation segment! Please keep it
Best legacy leader yet!! Great review, keep up the great work!!
Thanks so much! 🙏🏻
Best Leader of Legacy YET!! Can't wait to get him and the inevitable Repaint as his twin brother Dreadwing!!! Nice review as always my friend!!
Awesome mold. Can't wait for repaints!
It'd be really cool if DNA designs made an upgrade kit that included a new chest piece and parts to make it look more Prime accurate
Or a bigger minigun and sword. Maybe some proximity bombs so they can easily repaint and reuse the lot when Dreadwing comes out
I'm hoping for that as well and a replacement gun and sword. Those are just way to small and flimsy.
Eh
I'm excited to see Skyquake and Needlenose decoed into one of the varations.
“Skyquake serves only one Master!”
I am so Ready for this guy! Been a big fan of this underrated character who got way too little screentime.
Might get any redecos too, this looks like one of the best leaders in years.
I love how sleek and angular he is in that alt-mode
It’s really nice! Love the jet mode!
Omg yesss, please keep doing the reverse transmations 🙏
I really hope they create a G1 colourway of this guy, that figure along with Thunderclash are so nostalgic. Although I also do remember the dreaded gold plastic of the original!
Thank you for the awesome review! Please keep doing reverse transformations
Thanks so much! I’ll do my best :)
While I would have preferred a 1 to 1 Prime design, this is definetly the much appreciated love letter that those first three horribly failed to deliver.
Love both of his modes and... oh boi... he surely have a presence! He looks majestic!
Also, I appreciate seeing the transformation in both ways, it can help fully understanding how to move the parts.
The video
The figure
The presentation
The execution of this most remarkable ditty " again " is hella flawless!!!
Look keep doing what your doing !!!
The majority of the transformer action figure world will " continue" to salivate in what u present!!!
Ty for your continued service
" Salute "
( Pay attention none to the haters for they are simply mad that they r not you ) 😂
Now that we have skyquake hasbro has to give us dreadwing the most honorable decepticon.
Love the toy, love the review, loved the reverse transformation segment, do keep it up 😉
I always appreciate when transformations are shown both ways. Also, I pre-ordered the figure before the video was half over.
Use to not lile the mold due to the bulkeyness but now seeing a whole review ima so put it on my wish list
I’m excited for this dude, especially the eventual Dreadwing. Even if I didn’t know the dude, looks badass and I desperately need more Decepticons.
I hope they also do a bayverse with a G1 ish twist like authentics barricade for example
That would be a pretty cool concept!
I hope they don't, not everything has to be G1ified
@@therailfanman2078 ok?
I hope they’ll come with knockout’s partner next!
Looking at the figure I think Hasbro meant it for its G1 version but, as in the past, releases the redeco/retool first. But that doesn't change the fact that he's a great figure.
I love that second handle on the gatling gun that allows him to hold it properly 👍
this is a really good version his minigun is good and he’s alot taller than i thought he’d be
hope they make a Thunderwing out of this Guy
Ooooh! This could work as a good Jetfire mold!
Would be interesting to see!
Really cant wait to get a dreadwing repaint of this guy
Thank you for the review because I'm thinking about getting him as well....today I'm waiting for my Soundwave Legacy!!!!
No worries! Thanks for watching it! :) Soundwave is a cool figure! 👌🏻🔥
I'm fairly certain Skyquake went through a major redesign towards the end of development, and there are some clear artifacts left over from this. His elbows are mismatched, but they function identically. There's a pivoting mushroom joint near the landing gear that goes completely unused. The directions promote the idea of a solid object passing through another solid object. The back has a massive gap that sticks out behind his head. The tabs on the wings don't ever line up the way they need to. I believe that the original transformation had the canopy sliding into the cockpit space and the whole nose spinning around. This solved all of the issues I have with the figure. The ugly gap behind his head is nowhere to be seen. The wings tab into the back properly. The kicker? This concept makes the weight of the figure significantly more central and fills out his chest more, which would eliminate the need for heels, which he doesn't have.
Furthermore, I believe that the redesign was done specifically to dump the accurate cockpit torso in favor of the g1 torso since the shaping of everything seems to suggest that the original plan was more screen-accurate.
So Hasbro essentially gave us a worse figure because they wanted to jack themselves off to g1 some more like the last 5 years weren't enough already.
When the original dreadwing came out in g2, he came with a name dumped smokescreen(who was a jet). Hasbro is probably going to repaint needle nose into that smokescreen to combine with the inevitable dreadwing repaint.
Great review! And yes more reverse transformations!
Thanks so much! 🙏🏻
Ayeee just finished the video PRIMEVSPRIME IS DOING REVERSE TRANSFORMATIONS!🔥🔥 (you imo should definitely keep doing them)
The first transformers prime looking figure I’ve ever actually considered buying…… Freaking stunning. 🙌🏼
I was EXTREMELY worried after seeing TFA Prowl, but this soothes me. This right here is a Generations figure. A figure that won’t clash with other designs.
Haven't been collecting for a year and I believe this guy will be great to get back to doing that, his shoulder pads remind me of Saiyan armor
I can't really afford to get multiple recolor of the same mold at the leader class price point, so I have to decide do I get this, Dreadwing, G1 version, Machine Wars Starscream, or King Atlas, or do I just give in an take out a loan to get them all
"those of you old enough to remember prime". Me, with my memories of getting the original toy when I was a kid and turning into dust
Holy shit he is much better then I anticipated. The posability really sold me, butterfly, waist swivel and ab crunch on a mainline figure?!?!? Im so happy!
Personally I prefer Dreadwing's color scheme (and longer inclusion in the show), but glad to see how great the figure is! Now just to wait for the repaint.
Just generally cool to get both him and Dreadwing again in a modern day TF line, plus they’ve one upped their R.I.D Prime voyagers back in the 2010’s which is cool!
-Legacy Evolution Skyquake from the Prime Universe looks amazing. Heavily maintaining his Prime show appearance, G1ified a little, and has hints of his Decepticon Predator toy looks. The sword and machine gun are cool.
8:38 Optimus Prime: It has been awhile Skyquake.
Skyquake: Optimus Prime, I haven't seen you since the Battle of Technahar. Megatron ordered me to annihilate you.
-Transformation to robot to jet and back again is very involved.
13:33 Skyquake: Air superiority achieved.
-Jet mode looks as awesome has his robot mode. It's sharp and aerodynamic.
-Looking forward to his blue repaint as his twin brother Dreadwing, and possibly a repaint as his Decepticon Predator figure. As the tabs and evo-fusion gimmick with Needlenose may be a hint, of what else is to come with this Skyquake mold.
Skyquake- What a figure the weapons, alt mode, and robot mode is just perfect just a big ole g1 and prime universe combination styled seeker
9.5 outta 10
I agree! Very nice fusion!
His design really reminds me of a transforming gundam
Can't wait for the Dreadwing repaint!
I like how the alt mode specifically looks like the old robotech alpha fighter. Sweet!
This figure looks sick! I’m a Prime universe fan, and can’t wait to have this bot in my ranks. The reverse transformation segment is a keeper. Great review.
Definitely to get this guy
The jet combined mode with Needdlenose remind me of ROTF Mindwipe and his Scout class compatible as you said
I feel like hasbro missed the chance of selling skyquake and dreadwing in a 2 pack since they are basiclly the same
Hey buddy great review and YOU SHOULD ADD THAT REVERSE TRANSFORMATION segment as a regular. Please man. Thanks from Kuala Lumpur
Thanks so much for the feedback 🙌🏻🔥
Now I can't wait for Prime Dreadwing
Yes! Please keep the transforming segment in! And Oh my heavens, Skyquake looks great!
Cool review. After seeing the transformation, I'm glad I pre-ordered him.
I have to be honest; for all I like the figure and the alt mode a lot, I think the combination with Needlenose just looks a bit goofy. It really just looks like "a plane sitting on top of another plane" and not really organic as a combination. I think Needlenose is too big for it.
Would have quite liked to have seen some sort of Core Class figure with that sort of compatibility though; maybe some sort of variant of Prime Soundwave in Predator Drone alt mode would have looked sweet pegged on top?
i found by not feeding the cockpit cover through it helps support the entire wing assembly and stops it from slipping down.
Oh my gosh, Legacy Evolution Skyquake is so SUPERIOR! I love his Evo-Fusion gimmick with Needlenose, this gimmick does remind me to original Transformers toy, that's such a super sweet touch from Hasbro 😊. Despite Skyquake is die so quickly in Transformers Prime and become a zombie robot 🤖, however i still want to try to pick up this guy. Unlike Legacy Bulkhead, Arcee and Knock Out, this design is almost similar to original Transformers Prime toy Skyquake, that's super sweet touch for my opinion. For me Skyquake and Needlenose can become as great Decepticon partner attempt his Evo-Fusion gimmick, great video, PrimevsPrime 🤗.
I could have easily mistaken this as a third party black magic.
Awesome review and figure keep up the fantastic job Prime
Now, I too sold on the robot mode I thought it was too flat. But I am 100% sold on the transformation and the jet mode!!
He looks awesome, I can't wait to see the repaint for Dreadwing
Nice review. I have Skyquake on preorder and can't wait to get him. I like the Legacy Bulkhead and I think it was supposed to be a G1 version of Animated Bulkhead not Prime even though they said Prime on release probably bc of popularity. Xtransbots is making a MP version of Bulkhead that is taking queues from the Legacy one and it looks amazing with the G1 inspiration. We have APC if we want something closer to the original. I like that Hasbro is doing these G1 -esque versions and I hope one day we get a G1 style Prime and/or Cyberverse Bumblebee.
Can’t wait to Skyquake 👍👍👍👍😎
Great review, will be snacking him up asap
I'll just see this as Dreadwing and Skyquake's Cybertronian mode alt-mode before they scanned the jet mode. We did see Dreadwing's Cybertronian alt-mode in one episode where Wheeljack explained he had been chasing down Dreadwing after blowing up Seaspray (and tried to take Wheeljack with him).
I can see this also becoming a dramatic retool into Beast Wars Transmetals Depth Charge
I honestly can't believe I can say this with comfort, but here it is: Skyquake is one of my favorite Decepticons.
“Ramming this into an auto bots throat and turning and completely ripping apart the auto bot” GAH DAMN
Yes! Please keep the reverse transformations.
Just like you, I only managed to get Dreadwing. Now I can finally get his brother! Hope Vehicons are next.
Reverse transformation is a great idea hope you continue to do it in the future
Thanks for the feedback mate! I’ll do my best!
Somehow I actually remember Skyquake more from his appearance in last stand of the wreckers. I guess it must be how integral he was to the story, his death at the very end of the book was quite shocking.
His chest is way to flat imo, but other than that I cant wait to get the dreadwing recolor!
Woah u already got it? Awesome! You and the figure 👍 😁
Man the skyquake and dreadwing design is iconic
Thanks for the video! I don't really pre-order, but this one I made an exception for.