Great video! This is exactly what I want to do with our Albemarle 28 express. We put the boat on a trailer and the old bottom paint is pointless and a hell of an eye sore. Thanks for posting🤙
@@nickrdgz9323 I didn’t make a “final video”, but I’ll see if I can find a video that has some good shots of the hull with the anti-fouling paint removed.
Hi...I would like to get your advice on what would be the safest and best way to remove new antifouling on a new boat without damaging the gelcoat and the process needed after that to have the hull back to a shiny surface if antifouling is not going to be reapplied?
The paint stripper that I used seem to be pretty gentle to the hole. If you still had some residual paint that was not coming off, you could probably send it with 1000 or 2000 grit wet sandpaper in spots. The gelcoat would probably come back to a nice shine if you compounded it with a good quality product. I use a product called ChopTop from Shine Supply, and I apply it with a DA polisher from Harbor Freight and an orange foam polishing pad from Lake Country. The polishing compound cost as much as the machine and the pad. I think you’ll get really good results with that combination if you just take your time.
@@jahson1078 I don’t see why not. You are just removing the paint and I don’t believe it’s corrosive to aluminum. It worked really well and was pretty “green”.
No, it’s too difficult to get to while the boat is on the trailer. The part I did was mostly for aesthetics. It’s not really a “high performance” boat so I don’t think it will matter too much.
I removed it for aesthetics because I’m keeping the boat on a trailer at my house so I don’t need to use anti fouling paint like the previous owner that kept it in the water all the time.
@@RandomlyAwkward1 oh apologies I'm new to the industry and trying to learn. Can I ask a question with metals can you apply antifoul direct to a sigma paint? Iv heard its possible if done at the right time. Thanks
@@mike-Occslong From quick research, PPG makes a bonding paint called Sigmacover that is put in between the dissimilar paint products. Here’s a link to the info: docs.td.ppgpmc.com/download/389/389/sigma-alphagen-230 Hope this helps!
Ha ..good one!!! “Back to Nature” Aqua Strip. A gallon was about $50. I’m not normally a “environmentally friendly” guy, but this stuff worked great. I bought it at a local marine supply store but I’m sure Amazon, or even the manufacturer has it.
Glove up when dealing with any stripper. Sage advice.
Great video! This is exactly what I want to do with our Albemarle 28 express. We put the boat on a trailer and the old bottom paint is pointless and a hell of an eye sore. Thanks for posting🤙
Glad you enjoyed the video. I had fun making it!
I wish I heard that stripper tip when I was in the Navy 🤷🏻♂️
I try to put relevant safety information in all of my videos!
This is what i am gonna do with our bayliner witch has a false waterline antifouling.
Tnx al lot from the Netherlands🤟🏻
Thank you from Florida, USA! Good luck with your project…
Never knew this product existed! Good stuff and great video!
Thanks! Usually I equate eco-friendly with useless but this product actually worked really well.
That was the easy part, lets see him doing underneath!!
No one sees underneath!
Nice work!
Great Job my man.
Thanks! It was fun making the video…
is there a limit to how many times you can coat it and scrape it, without damage to fiberglass?
Do you have any videos of the final outcome you would upload?
@@nickrdgz9323 I didn’t make a “final video”, but I’ll see if I can find a video that has some good shots of the hull
with the anti-fouling paint removed.
Hi...I would like to get your advice on what would be the safest and best way to remove new antifouling on a new boat without damaging the gelcoat and the process needed after that to have the hull back to a shiny surface if antifouling is not going to be reapplied?
The paint stripper that I used seem to be pretty gentle to the hole. If you still had some residual paint that was not coming off, you could probably send it with 1000 or 2000 grit wet sandpaper in spots. The gelcoat would probably come back to a nice shine if you compounded it with a good quality product. I use a product called ChopTop from Shine Supply, and I apply it with a DA polisher from Harbor Freight and an orange foam polishing pad from Lake Country. The polishing compound cost as much as the machine and the pad. I think you’ll get really good results with that combination if you just take your time.
Pretty gentle to the hull, not the hole! I was using text to speech. Sorry…
Thank you for your reply and helpful advice 👍....would this stripper be more gentle on the gel coat more than soda blasting? ....@@RandomlyAwkward1
how many buckets of coating were used for coating?
I honestly don’t know, but I would guess that the bottom paint had been applied several times over the years.
Does it work on pontoons as well too?
@@jahson1078 I don’t see why not. You are just removing the paint and I don’t believe it’s corrosive to aluminum. It worked really well and was pretty “green”.
Are you going to strip the bottom of the hull?
No, it’s too difficult to get to while the boat is on the trailer. The part I did was mostly for aesthetics. It’s not really a “high performance” boat so I don’t think it will matter too much.
3:35 😂
What's the point tho as youl need to re antifoul+
I removed it for aesthetics because I’m keeping the boat on a trailer at my house so I don’t need to use anti fouling paint like the previous owner that kept it in the water all the time.
@@RandomlyAwkward1 oh apologies I'm new to the industry and trying to learn. Can I ask a question with metals can you apply antifoul direct to a sigma paint? Iv heard its possible if done at the right time. Thanks
@@mike-Occslong From quick research, PPG makes a bonding paint called Sigmacover that is put in between the dissimilar paint products. Here’s a link to the info: docs.td.ppgpmc.com/download/389/389/sigma-alphagen-230
Hope this helps!
ALWAYS wear a respirator when working with a bottom paint. It’s very toxic and carcinogen…
Ok enough with slow mo .. LoL
I figured some people would enjoy the scrapey goodness!
name of stripper and don't say bunny lol
Ha ..good one!!! “Back to Nature” Aqua Strip. A gallon was about $50. I’m not normally a “environmentally friendly” guy, but this stuff worked great. I bought it at a local marine supply store but I’m sure Amazon, or even the manufacturer has it.